Fuel Injector Connection 2200DENSO.60.11.D fuel injector
Click to zoom in
View vehicle applications

Description

Build the fuel system around the correct flow and connection

Fuel Injector Connection 2200DENSO.60.11.D supports the stated flow, fuel, electrical, and physical configuration. Compatible with all race fuels

Features

  • Backed by a lifetime warranty against original manufacturing defects, these injectors guarantee reliability and performance for the long haul.
  • Installation may require a different injector plug or a separately verified plug-and-play adapter.
  • All high performance fuel injectors are intended for off-road use only.
  • Bosch Part Number: 0280158821
  • Plug type: DENSO

Fitment & Requirements

Scope Requirement
Component-specific application Compatible with all race fuels
Component-specific application Equipped with all necessary o-rings for factory applications, Fuel Injector Connection injectors offer hassle-free installation in listed vehicles. For aftermarket or custom setups, confirm the required length and O-ring combination before ordering.
Component-specific application Just state year, make, model, and engine in the box below

Part Numbers & Options

Option Manufacturer Part Number
Default 2200DENSO.60.11.D

Specifications

Detail Value
Product Type Fuel Injector
Fuel Compatibility (except Q fuels and any fuel containing MTBE)
Fuel Compatibility 2 these injectors deliver exceptional idle performance in street-driven vehicles while supplying ample fuel for higher horsepower outputs on both E85 and gasoline.
Fuel Compatibility 3 Crafted with stainless alloy valves, these injectors are engineered to handle e85
Dimensions Equipped with all necessary o-rings for factory applications, Fuel Injector Connection injectors offer hassle-free installation in listed vehicles. For aftermarket or custom setups, confirm the required length and O-ring combination before ordering.
Flow Rating Flow: 2200cc @ 3 bar
Application Requirement Just state year, make, model, and engine in the box below

What's Included

  • The exact selected product or set shown in the Part Numbers & Options table
  • Unlisted injectors, rails, wiring, fittings, tuning, tools, and installation hardware are not included

About Fuel Injector Connection

Fuel Injector Connection supplies flow-matched fuel injectors, connection components, service parts, and supporting fuel-system hardware. Correct selection depends on the exact flow, electrical, dimensional, spray-pattern, quantity, and engine requirements rather than a similar-looking injector alone.

Related Parts

  • No external product is linked. Verify any injector adapters, rails, seals, pumps, or tuning components against an ACTIVE Black Ops Auto Works listing for the exact application before purchase.

FAQ

What is the 2200DENSO.60.11.D?

It is the exact fuel injector and configuration described in the fitment and specification sections above.

Is this selected by vehicle model alone?

No. Confirm every stated engine, connector, rail, length, flow, and package requirement that applies to this exact item.

Is tuning required?

Fuel-system and injector changes can require calibration. Use qualified tuning guidance for the exact engine, fuel, injector data, and operating pressure.

Does the listing include every surrounding fuel-system part?

No. Only the components stated in the What's Included section are included.

Can a related part number be substituted?

No. A different flow rate, length, connector, spray pattern, quantity, or adapter package is a different configuration.

Which fuel can be used?

Use only the fuels explicitly listed in the specifications and current manufacturer data for this exact configuration.

What should be checked before installation?

Verify the part label, seals, connector, rail fit, quantity, fuel compatibility, and calibration requirements before opening the fuel system.

Who should install fuel-system components?

A qualified technician should depressurize the system, follow the vehicle service procedure, prevent contamination, and leak-check the completed installation.

Installation Instructions

  1. Confirm the Fuel Injector Connection part label and every fitment, connector, dimension, flow, quantity, and fuel requirement before installation.
  2. Review the vehicle, engine, or component service procedure and disconnect electrical power where required.
  3. Relieve fuel-system pressure safely and work in a ventilated area away from sparks, flame, and hot surfaces.
  4. Keep all ports and components clean, replace only the seals specified for the exact application, and do not force mismatched connectors or fittings.
  5. Install the component in the documented orientation and tighten fasteners or fittings to the applicable current specification.
  6. Restore pressure, inspect every disturbed connection for leaks, confirm normal operation, and complete any required calibration before road use.

Fuel Injector Connection 2200 CC/210LB Fuel Injector

2200DENSO.60.11.D
Fuel Injectors
Same Day or Next Business Day
$ 120.00
$ 120.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×