View vehicle applications
Fitment notes and restrictions
Description
ACT Xtreme Race Sprung 6 Pad Clutch Kit 2005-2014 Subaru WRX Impreza WRX EJ255 FA20 FA24 | SB12-XTG6
This product is aCT's top-tier Xtreme race sprung 6-pad clutch kit, engineered for Subaru WRX, Impreza WRX, Forester XT, Legacy GT, and Outback XT applications running the 2.0L and 2.5L Turbo flat-four engines. This kit delivers a rated torque capacity of 681 ft-lbs at the crank , approximately 111% over OE, using ACT's 240mm Xtreme pressure plate paired with a 6-Pad Sprung Ceramic Race Disc and the ACT XACT Prolite Chromoly Flywheel.
Use ACT manufacturer part number SB12-XTG6 to confirm the exact drivetrain component and application.
Key Features
- ACT Xtreme Pressure Plate (XT clamp load, 240mm).
- ACT 6-Pad Sprung Ceramic Race Clutch Disc (240mm / 9.4 in, spring-centered hub).
- ACT XACT Prolite Chromoly Flywheel #600895 (8.5 lbs, required for 240mm conversion).
Fitment
For the listed turbocharged manual-transmission applications, match the exact engine and gearbox. The 2006 Legacy GT spec.B application requires the five-speed manual; later spec.B transmissions are not established by this listing.
This is a matched ACT 240 mm conversion and requires the ACT flywheel supplied with the kit. Subaru introduced revised original-equipment 240 mm clutch components during mid-2018 production beginning with VIN J*806877. ACT warns that its clutch and flywheel components must not be mixed with that revised OE system. Have the installer verify the complete conversion and release-system requirements for the actual vehicle.
| Years | Make | Model | Application |
|---|---|---|---|
| 2006 | Subaru | Baja | Turbo |
| 2008 | Subaru | Forester | Sports 2.5 XT |
| 2006-2008 | Subaru | Forester | XT Limited |
| 2006-2014 | Subaru | Impreza | WRX |
| 2006-2007 | Subaru | Impreza | WRX Limited |
| 2010-2014 | Subaru | Impreza | WRX Limited |
| 2009-2014 | Subaru | Impreza | WRX Premium |
| 2006-2007 | Subaru | Impreza | WRX TR |
| 2010-2012 | Subaru | Legacy | 2.5GT |
| 2005-2006 | Subaru | Legacy | GT |
| 2005 | Subaru | Legacy | GT Limited |
| 2007-2009 | Subaru | Legacy | GT Limited |
| 2006 | Subaru | Legacy | GT spec.B, five-speed manual only |
| 2005-2006 | Subaru | Outback | XT |
| 2005-2009 | Subaru | Outback | XT Limited |
| 2015-2024 | Subaru | WRX | Base |
| 2015-2025 | Subaru | WRX | Limited |
| 2015-2025 | Subaru | WRX | Premium |
| 2024 | Subaru | WRX | TR |
| 2025 | Subaru | WRX | TS |
Vehicle fitment is a starting point. Confirm every drivetrain specification and the exact ACT part number before installation.
Confirm SB12-XTG6 against the complete ACT application before ordering.
Specifications
| Brand | ACT |
|---|---|
| Manufacturer Part Number | SB12-XTG6 |
| Product Type | Clutch Kits - Single |
| Condition | New |
Manufacturer Part Number: SB12-XTG6
What’s Included
The exact ACT clutch kits - single and quantity identified by the product title and MPN. Bearings, alignment tools, flywheel bolts, pressure-plate bolts, hydraulic parts, and related hardware are included only when specifically stated.
About ACT
ACT develops application-specific clutch kits, friction discs, pressure plates, flywheels, bearings, and supporting drivetrain components for street and motorsport use. Black Ops Auto Works organizes every ACT listing by exact MPN and verified vehicle application.
The SB12-XTG6 should be selected as part of a complete matched ACT drivetrain system.
Related Parts
Frequently Asked Questions
What is the SB12-XTG6?
It is the ACT single-disc clutch kit described in this listing for the stated application and use.
How do I confirm fitment?
Match the complete year, make, model, engine, transmission and every qualifier shown in the title and fitment section.
Is this intended for street use?
ACT's product page lists SB12-XTG6 for high-power street or race use, while its application chart marks the kit as not recommended for street use. Because those sources differ, confirm the intended use with ACT before ordering.
Can I mix clutch components from different kits?
Do not assume components are interchangeable. Verify spline, diameter, step height, release system and the complete matched ACT assembly.
Does installation require break-in?
Follow the current ACT instructions for the exact clutch and disc type. Street friction systems commonly require a controlled break-in period; race products can differ.
Should the flywheel be inspected or resurfaced?
Yes. Inspect the mating surface and use only a compatible flywheel prepared to ACT specifications. Replace damaged or out-of-spec components.
Is professional installation recommended?
Yes. Clutch and flywheel work requires correct transmission removal, fastener torque, alignment, release-system setup and safety procedures.
Can Black Ops Auto Works help verify the application?
Yes. Provide the vehicle, engine, transmission, existing flywheel, power level and intended street or competition use before ordering.
Installation Instructions
- Confirm ACT part and the complete engine, transmission, flywheel, spline, and release-system application before disassembly.
- Inspect every component and compare the new part with the removed assembly before modifying or installing anything.
- Inspect the flywheel or friction surface, pilot support, release bearing, fork, pivot, hydraulic system, seals, and mounting hardware.
- Clean friction surfaces correctly and keep oil, grease, and fingerprints away from the clutch disc and mating faces.
- Use the vehicle service procedure and current ACT instructions for alignment, fasteners, torque sequence, release travel, and clearances.
- Verify smooth release, correct free play, clean gear engagement, and leak-free operation before road use.
- Complete the manufacturer-specified break-in procedure before launches, dyno pulls, racing, towing, or full-torque operation.
California Proposition 65: WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.




