View vehicle applications
Fitment notes and restrictions
Description
Remove the hybrid Tundra active air dam without triggering fault codes
Addictive Desert Designs AC76200NA01NA is ADD's shutter-motor relocation solution for third-generation Toyota Tundra hybrid models. It keeps the factory motor connected after the active front spoiler is removed, supporting most aftermarket front-bumper installations or additional clearance with the factory bumper.
Key Features
- Allows removal of the factory active front spoiler without error codes
- Relocates and retains the factory shutter motor
- Required by ADD for most aftermarket front bumpers on hybrid-engine models
- Provides additional clearance with the factory front bumper
- High-quality steel construction
- Hammer black powder-coated finish
- Made in the USA
- Exact Addictive Desert Designs application is identified by manufacturer part number AC76200NA01NA
Application details and restrictions
| Years / Scope | Make | Model / Component | Requirement |
|---|---|---|---|
| 2022-2026 | Toyota | Tundra | Hybrid engine with factory active front spoiler system only |
This kit is only for third-generation Tundra hybrid-engine models equipped with the factory active front spoiler. ADD does not identify it for non-hybrid trucks. Installation requires cutting the removed shutter-motor assembly, drilling one 1/4-inch mounting hole, relocating the beeper, moving the A/C line for bracket clearance, and rerouting the shutter-motor harness.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | AC76200NA01NA |
| Product Type | Hybrid shutter-motor relocation / active front spoiler delete kit |
| Material | Steel |
| Finish | Hammer black powder coat |
| Vehicle Requirement | 2022-2026 Toyota Tundra hybrid with factory active front spoiler |
| Installation Time | Approximately 1 hour for OEM removal and bracket installation |
| Skill Level | Easy, with basic mechanical and power-tool experience |
| People Recommended | Two |
| Drilling | One 1/4-inch mounting hole |
| Cutting | Required on the removed shutter-motor assembly as shown by ADD |
| UPC | 814849029135 |
| Country of Origin | USA |
| California Proposition 65 | Warning applies |
What's Included
- Addictive Desert Designs AC76200NA01NA: ADD AC76200NA01NA lower shutter-motor mounting bracket
- Upper shutter-motor support bracket
- Two 5/16-18 x 1-inch bolts and one 5/16-18 x 1-1/2-inch bolt
- Three 5/16-18 nylon lock nuts and seven 5/16-inch flat washers
- One 1/4-20 x 1-inch bolt and one 1/4-20 x 1-1/2-inch bolt
- Two 1/4-20 nylon lock nuts and four 1/4-inch flat washers
About Addictive Desert Designs
Addictive Desert Designs engineers off-road bumpers, armor, racks, and installation accessories in Chandler, Arizona. This hybrid Tundra kit is designed around the factory active-spoiler electronics and front-end packaging so bumper clearance can be added without abandoning the original shutter motor.
Related Parts
- No related store product is linked because supporting components must be verified for the exact vehicle, engine, transmission, and current Addictive Desert Designs configuration.
FAQ
What is the AC76200NA01NA?It is active front spoiler delete kit for the exact application and restrictions shown above.
Which Tundra models are supported?ADD specifies 2022-2026 third-generation Toyota Tundra models with the hybrid engine and factory active front spoiler.
Will it fit a non-hybrid Tundra?No. ADD identifies this kit for hybrid-engine models with the active front spoiler system.
What does the kit do with the shutter motor?It relocates and retains the factory shutter motor so the active spoiler can be removed without triggering error codes.
Is it required for an aftermarket front bumper?ADD states that the solution is required when installing most aftermarket front bumpers on hybrid models.
Can it be used with the factory bumper?Yes. ADD states that it provides additional clearance when used with the factory front bumper.
Does installation require cutting?Yes. ADD instructs the installer to cut the removed shutter-motor assembly along the illustrated clearance lines.
Does installation require drilling?Yes. The lower bracket position is marked and one 1/4-inch mounting hole is drilled.
Installation Instructions
- Confirm the truck is a supported 2022-2026 Tundra hybrid with the factory active front spoiler and verify the ADD AC76200NA01NA part label.
- Read the complete ADD guide, gather the specified sockets, wrenches, drill, 1/4-inch bit, jigsaw, and eye protection, and use two people where recommended.
- Remove the factory active air dam and shutter motor using Toyota service procedures, then cut the removed motor assembly only along ADD's illustrated clearance lines.
- Loosely position the lower mounting bracket with the indicated factory bolt, mark the second hole, and drill the marked location to 1/4 inch.
- Secure the lower bracket with the factory fastener and supplied 1/4-inch hardware, then attach the shutter motor with the specified 5/16-inch and 1/4-inch hardware.
- Relocate the factory beeper with a 10mm socket and gently move the A/C line forward until it has clear separation from the mounting bracket.
- Install the upper support bracket through the top core support and rear motor hole with the supplied 5/16-inch hardware.
- Reroute the factory harness, reconnect the shutter motor, verify full A/C-line and wiring clearance, and confirm the vehicle reports no active-spoiler fault before driving.
