-11%
AEM 50-1215 340LPH 65mm ethanol compatible in-tank fuel pump kit
AEM 340LPH high flow fuel pump kit with mounting hooks for performance fuel systems
AEM 50-1215 340LPH 65mm Fuel Pump Kit E85 Compatible
AEM 50-1215 340LPH 65mm Fuel Pump Kit E85 Compatible
AEM 50-1215 340LPH 65mm Fuel Pump Kit E85 Compatible
Click to zoom in

AEM 340LPH 65mm Fuel Pump Kit w/ Mounting Hooks - Ethanol Compatible

AEM
AEM50-1215
840879024451
Fuel Pumps
20+ Units In Stock - Ships Next Business Day
$ 175.95 $ 155.95
$ 155.95

340 Liters Per Hour, E85 Compatible, Drop-In 65mm Body Built for Real-World Performance Builds

The AEM 50-1215 is a 340LPH in-tank fuel pump in a 65mm diameter body with a short offset inlet design and mounting hooks for universal in-tank basket installation. At 340 liters per hour at 43 psi, the AEM 50-1215 supports high-horsepower gasoline and ethanol builds without requiring a larger fuel pump basket or custom fuel system fabrication. The 50-1215 is fully compatible with E85 and other ethanol-blend fuels, making it a preferred direct upgrade for naturally aspirated, turbocharged, and supercharged applications replacing failed or undersized factory fuel pumps. Note: The AEM 50-1215 is not CARB compliant and is intended for off-road or competition use only where applicable.

Key Features

  • 340LPH flow rate at 43 psi supports high-horsepower gasoline and E85 builds
  • 65mm body diameter for universal drop-in compatibility with common fuel pump baskets
  • Short offset inlet design with mounting hooks for secure in-tank basket installation
  • Fully E85 and ethanol-blend compatible for flex-fuel and dedicated E85 applications
  • Universal fitment works with any vehicle requiring a 65mm in-tank fuel pump upgrade
  • Includes wiring harness, pre-filter, O-rings, and installation hardware
  • Replaces failed or undersized OEM fuel pumps in performance builds
  • AEM 50-1215 is not CARB compliant, intended for off-road or competition use in applicable jurisdictions

Specifications

Detail Value
Part Number 50-1215
UPC 840879024451
Flow Rate 340 LPH at 43 psi
Body Diameter 65mm
Inlet Style Short offset with mounting hooks
Fuel Compatibility Gasoline, E85, ethanol blends
Application Universal in-tank (65mm basket)
CARB Status Not compliant, off-road/competition use

What's Included

  • 1 AEM 50-1215 340LPH in-tank fuel pump
  • Pre-wired wiring harness
  • Fuel inlet pre-filter strainer
  • O-rings for basket seal
  • Installation hardware
  • Instructions

About AEM Performance Electronics

AEM Performance Electronics has developed aftermarket performance electronics and fuel system components for over 30 years from Hawthorne, California. The AEM fuel pump line is engineered for high-demand applications where factory fuel pumps cannot sustain adequate fuel pressure under boost or at elevated horsepower levels. AEM fuel pumps are used by professional race teams and performance builders worldwide in turbocharged, supercharged, and naturally aspirated builds running gasoline and E85.

Frequently Asked Questions

What is the flow rate of the AEM 50-1215 fuel pump?

The AEM 50-1215 is rated at 340 liters per hour (LPH) at 43 psi. This flow rate is sufficient to support approximately 500-600 horsepower on gasoline, or somewhat less on E85, depending on the specific fuel system configuration and injector sizing.

Is the AEM 50-1215 compatible with E85?

Yes. The AEM 50-1215 is fully compatible with E85 and ethanol-blend fuels. The internal pump components are designed to withstand the corrosive properties of high-ethanol fuels that damage non-compatible pumps over time.

What is the body diameter of the AEM 50-1215?

The AEM 50-1215 uses a 65mm body diameter. This is a common standard size used in many OEM and aftermarket fuel pump baskets, allowing drop-in installation without requiring a new basket assembly in most applications.

Does the AEM 50-1215 come with a pre-filter?

Yes. The AEM 50-1215 kit includes an inlet pre-filter strainer that attaches to the pump inlet to protect the pump from large debris particles that may be present in the fuel tank.

Is the AEM 50-1215 a direct drop-in replacement for my stock fuel pump?

The AEM 50-1215 is a universal 65mm in-tank pump with a short offset inlet and mounting hooks. Whether it is a direct drop-in depends on the specific vehicle's basket design and dimensional clearances. Most performance builds use the 50-1215 as an upgrade in an aftermarket or compatible OEM basket rather than a simple one-for-one swap.

Does the 50-1215 work on a daily driver street car?

The AEM 50-1215 can be used in street vehicles as an upgraded fuel pump, but note it is not CARB compliant and may not be legal for street use on emissions-tested vehicles in California and some other states. Confirm legality for your application before installation.

What horsepower level does the AEM 50-1215 support on gasoline?

At 340 LPH the AEM 50-1215 generally supports up to approximately 500-600 horsepower on gasoline, depending on fuel pressure, injector duty cycle, and system efficiency. Actual supported power will vary by build and fuel system configuration.

Does the AEM 50-1215 include a wiring harness?

Yes. The AEM 50-1215 kit includes a pre-wired wiring harness for connection to the vehicle's fuel pump circuit. Review the included wiring diagram to match the harness connectors to your vehicle's fuel pump connector type.

Installation Instructions

  1. Relieve fuel system pressure by removing the fuel pump fuse and cranking the engine until it stalls.
  2. Disconnect the negative battery terminal before working in the fuel tank.
  3. Access the fuel pump basket by removing the access cover from the trunk floor or truck bed (location varies by vehicle).
  4. Disconnect the fuel lines and electrical connector from the OEM pump assembly.
  5. Remove the OEM fuel pump basket locking ring and extract the basket from the tank.
  6. Remove the OEM pump from the basket and install the AEM 50-1215 pump using the included O-rings and hardware, ensuring the inlet pre-filter is attached.
  7. Reinstall the basket assembly into the fuel tank and tighten the locking ring to the manufacturer's specified torque.
  8. Connect the fuel lines and the wiring harness from the 50-1215 to the vehicle's fuel pump connector.
  9. Reinstall the fuel pump fuse, turn the ignition on and off three times to prime the system, then start the engine and inspect for fuel leaks.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING: Not legal for sale or use on California or emissions-inspected vehicles. For off-road or competition use only.

Request For Information

Have questions about AEM 340LPH 65mm Fuel Pump Kit w/ Mounting Hooks - Ethanol Compatible? Fill out the form below and we'll get back to you by the next business day.
AEM

AEM

AEM Electronics gauges, wideband sensors, engine management, data dashes, fuel components, and water methanol systems support serious street and race builds. Shop X-Series UEGO wideband gauges, Infinity ECUs, CD-5 and CD-7 dashes, MAP sensors, fuel pumps, fuel pressure hardware, water meth kits, and wiring for Honda, Subaru, Nissan, Toyota, LS, and Mustang platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 148 AEM Electronics SKUs across engine monitoring, standalone control, data acquisition, fuel delivery, and charge cooling. What AEM Electronics Covers Wideband AFR Monitoring AEM X-Series UEGO controllers pair a gauge display with a Bosch LSU sensor to monitor air fuel ratio. The analog output can feed a compatible ECU or data logger for tuning and safety monitoring. Digital Dashes and Data CD-5 and CD-7 displays consolidate critical data such as RPM, coolant temperat...

View AEM Products
Engine

Engine

Engine parts and engine bay upgrades for Dodge, Jeep, RAM, Chrysler, Chevrolet, Ford, Toyota, Nissan, Subaru, and Honda vehicles are stocked at Black Ops Auto Works. Shop oil catch cans, supercharger pulleys, thermostats, radiators, cooling parts, throttle bodies, intake manifolds, headers, ignition coils, spark plugs, sensors, gaskets, fuel pumps, valve covers, engine covers, billet cap covers, and full engine bay dress-up parts for HEMI, Hellcat, Trackhawk, Redeye, Demon, Scat Pack, RAM TRX, LS, LT, Coyote, EcoBoost, K-Series, and 2JZ builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,298 engine SKUs across performance, cooling, oil control, ignition, and appearance categories. What This Category Covers The Engine collection combines OEM-replacement engine service parts with performance aftermarket upgrades for supercharged, turbocharged, and naturally aspirated builds...

View Engine Products
Fuel Delivery

Fuel Delivery

Fuel delivery parts for gas and diesel trucks, muscle cars, and import performance builds are stocked at Black Ops Auto Works. Shop fuel pumps, fuel pump modules, fuel rails, pressure regulators, fuel filters, fuel tanks, carburetors, flex fuel kits and sensors, fuel caps, and surge tanks for Ram Cummins, Ford Powerstroke, Dodge Charger and Challenger, Jeep, Chevrolet, Honda, Nissan, and Infiniti platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 1,874 fuel delivery SKUs across pumps, hardware, and tank categories. What This Category Covers Fuel delivery parts move fuel from the tank to the engine at the pressure and volume the injectors or carburetor need. This collection spans in-tank and external fuel pumps, pump modules and hangers, fuel pressure regulators, fuel rails, filters, tanks, carburetors, flex fuel conversion kits, and the caps and misc components that comp...

View Fuel Delivery Products
Fuel Pumps

Fuel Pumps

Fuel pumps and fuel pump modules for cars, trucks, and diesels are stocked at Black Ops Auto Works. Shop in-tank fuel pumps, external fuel pumps, drop-in pump modules, diesel lift pumps, pump controllers, PWM fuel controllers, single to dual pump upgrade kits, and complete pump and hanger assemblies for turbocharged four-cylinder platforms, HEMI Hellcat and Trackhawk builds, LS swaps, Corvette, Mustang, BMW, and Cummins and Duramax diesel trucks. Every pump is filterable by year, make, model, trim, engine, and fuel type so the correct flow rate and pressure rating ships the first time. Black Ops Auto Works carries 519 fuel pump SKUs across in-tank, external, diesel lift pump, and controller categories. What This Category Covers A fuel pump is the foundation of every fuel system, and matching pump flow capacity to actual engine demand is one of the most important decisions in any EFI or performance build. Undersized pumps cause lean conditions under hard acceleration that damage ...

View Fuel Pumps Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×