-2%
Click to zoom in
Product Overview
AEM DryFlow Air Filter AIR FILTER KIT 6in X 9in DRYFLOW from AEM Induction is identified by manufacturer part number 21-2099DK. This AEM universal air filter uses non-woven synthetic and is selected by flange diameter, overall dimensions, and available installation space rather than vehicle appearance alone. Match every listed measurement to the intake tube and surrounding clearance before ordering.
Key Features
- Designed for specification-matched custom intake applications; verify inlet diameter, outside dimensions, filter length, mounting space, and airflow direction.
- New AEM Induction component supplied in the configuration shown and described on this page.
- Exact application, dimensions, and included components should be verified before installation.
Fitment
AEM Induction 21-2099DK is a universal or specification-matched component. Confirm dimensions, inlet or outlet size, filter shape, mounting space, sensors, hoses, and system compatibility before ordering.
Specifications
| Brand | AEM Induction |
|---|---|
| Manufacturer Part Number | 21-2099DK |
| Product Type | Air Filters - Universal Fit |
| Condition | New |
What's Included
The exact air filters - universal fit product identified by AEM Induction 21-2099DK. Additional filters, tubes, couplers, clamps, heat shields, sensors, hardware, or service supplies are included only when specifically shown or stated.
About AEM Induction
AEM Induction develops vehicle-specific and universal intake, filtration, and supporting components for street and performance applications. Black Ops Auto Works organizes each listing by exact part number and available fitment data to support accurate product selection.
Related Parts
- AEM Dryflow Air Filter for 07-16 Audi A4 1.8L TFSI
- AEM DryFlow Conical Air Filter 5.5in Base OD / 4.75in Top OD / 5in Height
- Shop the complete AEM Induction collection
Frequently Asked Questions
What is the 21-2099DK?
It is the AEM Induction air filters - universal fit product described on this page in the listed configuration.
How do I confirm fitment?
Match the complete vehicle, engine, trim, intake layout, dimensions, sensors, and every application note before ordering.
Can I select this product by appearance alone?
No. Similar-looking intake and filter components can use different dimensions, connections, sensor provisions, mounting points, or applications.
What is included?
Only the components specifically identified on this product page are included; related filters, tubes, couplers, clamps, hardware, or service supplies may be separate.
Does an intake require tuning?
Tuning requirements vary by vehicle and intake configuration. Review the product notes and consult a qualified tuner when airflow or sensor behavior changes.
How should I maintain the filter?
Follow the filter-specific manufacturer instructions. Cleaning and treatment procedures vary by filter media and should not be assumed.
Is this product new?
Yes. The item condition is new unless this page explicitly states otherwise.
What should I verify before checkout?
Confirm the application, dimensions, included items, filter type, sensor provisions, emissions notes, and installation requirements.
Installation Instructions
- Confirm AEM Induction 21-2099DK and the complete application before disassembly.
- Inspect the component and compare every tube, filter, coupler, clamp, sensor provision, mounting point, and included item before modifying the vehicle.
- Follow current AEM Induction instructions and the vehicle service procedure for removal, installation, fasteners, sensors, hoses, and wiring.
- Keep intake components sealed and routed away from heat, sharp edges, moving parts, and direct water exposure where applicable.
- Check all connections, start the vehicle, inspect for leaks or warning lights, and verify safe operation before driving.
California Proposition 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
AEM Induction
AEM Induction parts and accessories are available to browse at Black Ops Auto Works for Mustang, Camaro, Civic Si, WRX, Silverado, F-150, Ram and other import and domestic performance builds. Shop Brute Force intake kits, cold air intakes, short ram systems, DryFlow filters, replacement panels, intake tubes and filter service parts with vehicle specific fitment data for confident ordering. What AEM Induction Covers Cold Air Intake Systems AEM Induction builds vehicle specific cold air intake and short ram systems that replace restrictive factory plumbing while retaining the sensors and mounting points required for the application. Brute Force and Cold Air Induction Truck and Muscle Car Airflow Brute Force kits support popular American trucks and performance cars with large filter area, sealed or open inlet layouts, and application matched intake tubing for reliable daily driving and towing use. DryFlow Filter Technology Oil Free Serviceable Filtration DryFlow synthetic filters ...
View AEM Induction Products
Air Filters
Performance Air Filters and Replacement Filters This collection covers filtration for factory air boxes, aftermarket intake systems, custom intake tubing, crankcase ventilation and vehicle HVAC systems. Start with the installation type, then confirm the exact manufacturer part number, filter media, dimensions and application shown on the product page. Similar-looking filters are not automatically interchangeable. Choose the Correct Air Filter Type Direct-fit and drop-in filters: shaped for a specific factory air box or listed intake system. Universal clamp-on filters: selected by flange inside diameter, base and top dimensions, height and available clearance. Cabin and HVAC filters: vehicle-specific filters for air entering the passenger compartment. Breather filters: compact filters for compatible valve-cover, crankcase-vent and catch-can applications. Pre-filters and wraps: outer covers designed for compatible primary filters in dusty, sandy or wet environments. Velocity...
View Air Filters Products
Air Filters - Universal Fit
Shop universal air filters for custom intake tubes, turbo inlets, carburetors, velocity stacks, crankcase breathers, and fabricated performance systems. Compare clamp-on cone filters, open-funnel designs, oval and tapered filters, carbureted air-cleaner assemblies, reusable oiled media, and dry synthetic options. Universal fitment depends on exact measurements, available space, mounting orientation, and the intended airflow path—not year, make, and model alone. Universal Air Filters for Custom Intake Builds A universal filter is selected by dimensions and interface. The flange inside diameter must match the intake tube, turbo inlet, velocity stack, carburetor neck, or breather connection. The filter body must also clear nearby panels, wiring, hoses, heat shields, suspension components, and the hood while leaving enough exposed media for the application. Measure the installation area before ordering. Record the flange size, base width, top width, overall height, filter shape, mounti...
View Air Filters - Universal Fit Products