Click to zoom in
This aFe drivetrain or fluid-service component is the Sway-A-Way Shock Oil 1 Gallon 7wt Synthetic. Confirm the axle, transmission or engine application, capacity, material, sealing surface, fastener requirements, clearance, and specified fluid before ordering.
Key Features
- Application-specific housing, cover, pan, mount, or service configuration
- Capacity, seal, clearance, fastener, and fluid requirements must be verified
- Whether you are building out a full performance package or filling in a specific need, this is an accessory built to work as well as it looks.
- The 50010-SP31 is a genuine aFe Power product, sourced directly through authorized distribution channels.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| Universal or specification-matched application. Verify every dimension, interface, operating requirement, and listing note. | |||
Specifications
| Brand | aFe Power |
|---|---|
| Manufacturer Part Number | 50010-SP31 |
| Product Type | Hydraulic Oils |
| Condition | New |
| Configuration | Sway-A-Way Shock Oil 1 Gallon 7wt Synthetic |
| Detail | Value |
| UPC | 802959005156 |
What's Included
One new aFe hydraulic oil in the exact configuration and quantity identified by this listing. Hardware, clamps, couplers, gaskets, sensors, wiring, fluids, calibration, and accessories are included only when expressly stated.
About aFe Power
aFe Power develops application-specific intake, filtration, exhaust, cooling, tuning, suspension, drivetrain, and truck-performance components supported by product testing and documented installation requirements.
Important Disclosures
- California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Related Parts
- aFe Silver Bullet Throttle Body Spacer 10-14 Chevrolet Camaro V6 3.6L
- aFe Silver Bullet Throttle Body Spacers 15-16 Ford Mustang GT V8-5.0L
- Shop the complete aFe Power collection
Frequently Asked Questions
How do I confirm the Sway-A-Way Shock Oil 1 Gallon 7wt Synthetic matches my axle, transmission, or engine (aFe 50010-SP31)?
Use the exact housing or transmission model, bolt pattern, capacity, drain and fill locations, clearances, and manufacturer application notes.
Are a gasket and hardware included?
Only components expressly listed for this exact product are included. Confirm gasket or sealant, bolts, plugs, magnets, and required fluids before service.
Which fluid should be used?
Use the vehicle and component manufacturer's current specification. Capacity can change with an aftermarket cover or pan, so verify level by the prescribed procedure.
What should be inspected for leaks?
Inspect the sealing surface, plugs, fittings, fasteners, and surrounding components after filling and again after the initial heat cycle.
Installation Instructions
- Confirm aFe part number 50010-SP31, the complete vehicle or specification-based application, and all required supporting components.
- Clean the assembly and surrounding area, drain fluid safely, and compare bolt patterns, plugs, seals, clearances, and capacity before removing factory parts.
- Prepare sealing surfaces, install the specified gasket or sealant and hardware sequence, and refill with the correct fluid using the prescribed level procedure.
- Inspect for leaks and interference after the initial heat cycle and recheck level and fasteners as directed.
aFe
Shop aFe Power cold air intakes, air filters, exhaust systems, intercoolers, charge pipes, tuning modules, suspension parts, drivetrain components, and truck accessories. Match every part by exact aFe manufacturer number and verify the complete vehicle, engine, drivetrain, emissions classification, dimensions, and included hardware before ordering. Cold Air Intakes and Performance Filters Choose an aFe intake by exact vehicle and engine application, then compare tube design, sensor provisions, housing configuration, emissions status, and filter media. Pro DRY S dry media is serviced without filter oil, while oiled media options follow their own cleaning and re-oiling procedures. Replacement and universal filters must be matched by flange size, panel dimensions, seal design, height, and airflow direction. aFe Power Exhaust Systems and Emissions Fitment Cat-back, axle-back, DPF-back, header, downpipe, mid-pipe, and related exhaust parts can vary by body style, cab and bed, wheelbase...
View aFe Products