View vehicle applications
Fitment notes and restrictions
Description
This Air Lift Performance suspension component is the 11-23 Chrysler 300 / 15-23 Dodge Challenger Coilover Kit. Confirm the complete chassis, drivetrain, factory damper or electronic-suspension equipment, front or rear position, ride-height range, wheel and tire clearance, management requirements, alignment needs, and included hardware before ordering.
Key Features
- Adjustable drop range of 1 to 4 inches below factory height, depending on application.
- 12kg front and 15kg rear spring rates.
- Threaded monotube dampers, lower mounts, and spring perches for height adjustment.
- Anodized aluminum damper bodies, top mounts, locking collars, and spring perches.
- Two adjustable rear coil spring perches.
- Set the initial ride height within the application range and tighten hardware to the vehicle service manual specifications.
Fitment
Air Lift 79017 is specified for rear-wheel-drive 2011–2023 Chrysler 300/300C, 2011–2023 Dodge Charger and 2015–2023 Dodge Challenger. The selected manufacturer product page explicitly excludes Scat Pack, Hellcat and Demon models; AWD applications are also excluded by the manufacturer application table. The broad model rows below apply only to supported RWD configurations outside those exclusions. Confirm the actual trim, drivetrain and chassis before ordering; the model name and year alone are insufficient.
| Years | Make | Model | Application |
|---|---|---|---|
| 2011-2023 | Chrysler | 300 | Verify engine and trim |
| 2015-2023 | Dodge | Challenger | Verify engine and trim |
| 2011-2023 | Dodge | Charger | Verify engine and trim |
Specifications
| Brand | Air Lift |
|---|---|
| Manufacturer Part Number | 79017 |
| Product Type | Coilovers |
| Condition | New |
| Configuration | 11-23 Chrysler 300 / 15-23 Dodge Challenger Coilover Kit |
What's Included
One new Air Lift coilover in the exact configuration and quantity identified by this listing. Compressors, tanks, management, brackets, fittings, lines, wiring, sensors, tools, and additional hardware are included only when expressly stated for this part number.
About Air Lift
Air Lift develops vehicle-specific load-support air springs, adjustable performance suspension, compressors, and air-management systems. Exact fitment, pressure limits, travel, and system requirements vary by part number and application.
Important Disclosures
California Proposition 65 warning: this product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.
Related Parts
- Air Lift Performance 15-21 Subaru WRX / STI Coilover Kit
- Air Lift Performance Coilover Kit 15-24 Ford Mustang S550/S650 Fastback
- Shop the complete Air Lift collection
Frequently Asked Questions
Will Air Lift 79017, the 11-23 Chrysler 300 / 15-23 Dodge Challenger Coilover Kit, work with my factory suspension options?
Confirm the complete chassis, drivetrain, adaptive or electronic dampers, front or rear position, wheel and tire package, and every exclusion for the exact part number.
Does this Air Lift Performance part include air management?
Suspension hardware and management are often sold separately. Check the exact included-parts list before planning compressors, tank, manifold, controller, sensors, lines, and fittings.
Will the vehicle need an alignment after installation?
Yes, a professional alignment is required after ride height or suspension geometry changes. Recheck clearance and alignment at the intended driving height.
Can the vehicle be driven at its lowest display height?
Use only manufacturer-approved driving heights and pressure ranges. A show or aired-out position may not provide safe suspension travel, steering clearance, or tire clearance.
Installation Instructions
- Confirm Air Lift part number 79017, the complete application, and every required supporting component before disassembly.
- Secure the vehicle at the manufacturer's specified lift points, unload the suspension as directed, and inspect the frame, brackets, springs, lines, and nearby components.
- Follow Air Lift's current instructions for bracket orientation, clearances, routing, fastener sequence, pressure limits, and any drilling or trimming.
- Inflate and leak-test the system, cycle the suspension and steering as applicable, and verify clearance from tires, exhaust, brakes, driveline, wiring, and bodywork.
- Torque and align as required, then recheck leaks, pressure, fasteners, and clearance after the first loaded drive cycles.




