Akrapovic 2024+ BMW X5M/X6M (Face Lift) Evolution Link Pipe Set (Titanium)

Evolution Link Pipe Set in Titanium Engineered for the 2024+ BMW X5M and X6M Facelift

The Akrapovic E-BM/T/15 Evolution Link Pipe Set (Titanium) is designed specifically for the 2024+ BMW X5M and X6M facelift generation, pairing directly with the Akrapovic Slip-On Line (Titanium) system to form a complete, perfectly tuned exhaust solution. Complex parts are cast in-house at Akrapovic's Slovenia titanium foundry from lightweight, high-quality titanium alloy, delivering significant weight reduction. A central cast titanium collector merges gas flow from both sides of the twin-turbocharged V8 for a balanced, deep muscle car-style tone across all drive modes. ECU reprogramming is required after installation. EPA compliant for US market use.

Key Features

• Engineered for the 2024+ BMW X5M and X6M facelift, pairs with Akrapovic Slip-On Line S-BM/T/16H
• Full titanium construction with complex parts cast in-house at Akrapovic's Slovenia foundry
• Lightweight, high-quality titanium alloy for maximum weight savings
• Central cast titanium collector equalizes gas flow from both engine banks
• Creates a complete exhaust system with deep, muscle car-inspired tone in all drive modes
• EPA compliant for street use in 49 non-California states
• Direct fitment for 2024+ BMW X5M and X6M (F95/F96 LCI facelift)
• ECU reprogramming required after installation to prevent check engine light activation
• MPN E-BM/T/15 is the correct Akrapovic evolution link pipe for 2024+ X5M/X6M facelift

Fitment

Specifications

What's Included

• 1x Akrapovic E-BM/T/15 Evolution Link Pipe Set (Titanium)
• All required mounting hardware and gaskets
• Installation instructions

Frequently Asked Questions

The E-BM/T/11 is engineered for the 2020-2023 BMW X5M F95 and X6M F96 (pre-facelift). The E-BM/T/15 is designed for the 2024+ X5M and X6M facelift generation (F95/F96 LCI). They are not interchangeable between model years.

Yes. Akrapovic specifies that ECU reprogramming is mandatory after installing the E-BM/T/15 to prevent check engine light activation and to allow the engine control system to optimize performance with the improved exhaust flow.

The E-BM/T/15 is designed to pair with the Akrapovic Slip-On Line (Titanium) S-BM/T/16H. Together they form a complete, optimized exhaust system. The link pipe set alone is a center section upgrade and is not a standalone exhaust replacement.

Yes. The E-BM/T/15 carries EPA compliance designation for street use in the United States. California residents should note the Non-CARB status and should verify compliance with local regulations before purchasing.

The central cast titanium collector merges exhaust gases from both banks of the twin-turbocharged V8 engine, balancing flow and improving scavenging efficiency. This produces the signature deep, muscle car-inspired exhaust character that defines the Akrapovic system on the X5M and X6M.

Yes. All complex components of the E-BM/T/15 are cast in-house at Akrapovic's own titanium foundry in Slovenia, then assembled and finished by hand with quality inspection at every stage before shipment.

Yes. The E-BM/T/15 fits both the 2024+ BMW X5M Competition and X6M Competition facelift variants. Both are confirmed fitments for this evolution link pipe set.

When combined with the Akrapovic Slip-On Line, the E-BM/T/15 creates a deep, muscle car-inspired exhaust tone optimized for all drive modes, from composed cruising to full-performance acceleration, without excessive cabin intrusion.

Installing aftermarket exhaust components may affect your BMW factory warranty. We recommend consulting your BMW dealer before installation. The E-BM/T/15 is EPA compliant, but warranty impact depends on your specific coverage and dealer.

Akrapovic products are backed by the manufacturer's limited warranty for defects in materials and workmanship when installed and used as specified. Contact Black Ops Auto Works for full warranty terms and support.

Installation Overview

1. Safely lift and support the vehicle; allow the exhaust system to cool completely
2. Remove factory center section components per Akrapovic installation instructions
3. Dry-fit the E-BM/T/15 to confirm routing, clearances, and hanger alignment
4. Install all supplied gaskets and fasteners, tightening progressively to specification
5. Torque all flanges and clamps evenly to prevent leaks
6. Lower the vehicle and verify all connections before starting the engine
7. Perform required ECU reprogramming to prevent check engine light warnings
8. Start the engine and inspect all exhaust connections for leaks

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.