Sold out
Akrapovic S-TY/T/3 Toyota GR Yaris 2024+ Slip-On Race
Akrapovic S-TY/T/3 Toyota GR Yaris 2024+ Slip-On Race
Akrapovic S-TY/T/3 Toyota GR Yaris 2024+ Slip-On Race
Click to zoom in

Akrapovic 2024+ Toyota GR/GRMN Yaris Slip-On Race Line (Titanium)

Akrapovic
AKRS-TY/T/3
3831126440589
Muffler
Out of stock
$ 3,579.00

Titanium Race Exhaust Purpose-Built for the 2024+ Toyota GR Yaris and GRMN Yaris Facelift

The Akrapovic S-TY/T/3 Slip-On Race Line Exhaust System is the definitive titanium race exhaust for the 2024+ Toyota GR Yaris and GRMN Yaris (facelift XP210 generation). Using race-proven, high-grade titanium throughout, the S-TY/T/3 delivers +3.5 kW at 6,950 rpm and +4.9 Nm of torque while cutting 48.3% of the factory exhaust weight with a total system weight of just 6.8 kg. Megaphone-shaped titanium tailpipes are heat-coated to resist discoloration at high temperatures, and a triple-resonator design produces an acoustically tuned race tone at all RPM ranges without interior drone. No ECU remapping is required. Track and closed-circuit use only.

Key Features

  • Full titanium construction throughout, race-proven high-grade material for the entire system
  • Power gain of +3.5 kW (4.8 hp) at 6,950 rpm tested on Akrapovic dynamometer
  • Torque gain of +4.9 Nm at 6,950 rpm
  • System weight 6.8 kg, 48.3% lighter than the factory exhaust
  • Megaphone-shaped titanium tailpipes with special high-temperature color-resistant coating
  • Triple-resonator system: two at the rear of the collector, one in the mid-pipe
  • In-house cast titanium collector for optimized, balanced gas flow and drone-free acoustics
  • Specifically engineered for the 2024+ GR Yaris and GRMN Yaris facelift platform
  • Bolt-on installation, no ECU remapping required for this slip-on configuration
  • Factory exhaust must be cut during installation
  • Race track and closed-circuit use only, not road legal
  • Optional Evolution Link Pipe available for extended tuning capability
  • MPN S-TY/T/3 is the correct Akrapovic slip-on for 2024+ GR Yaris facelift applications

Fitment

Year Range Make Model Trim
2024-2026 Toyota GR Yaris GR Yaris
2024-2026 Toyota GR Yaris GRMN Yaris

Specifications

Detail Value
Part Number (MPN) S-TY/T/3
Brand Akrapovic
System Type Slip-On Race Line
Material Titanium (full system)
System Weight 6.8 kg
Weight Savings 48.3% vs. stock
Power Gain +3.5 kW (+4.8 hp) at 6,950 rpm
Torque Gain +4.9 Nm at 6,950 rpm
Tailpipes Megaphone-shaped titanium, heat-resistant coated
Resonators 3 (2 rear-of-collector, 1 mid-pipe)
ECU Remap Required No
Road Legal No, race/closed circuit use only
Installation Note Factory exhaust must be cut during installation
Compatible Vehicles 2024+ Toyota GR Yaris, GRMN Yaris (XP210 facelift)
Country of Origin Slovenia
UPC N/A

What's Included

  • 1x Akrapovic S-TY/T/3 Slip-On Race Line Exhaust System (Titanium)
  • All required mounting hardware and gaskets
  • Installation instructions

Frequently Asked Questions

What is the difference between the S-TY/T/2 and the S-TY/T/3?

The S-TY/T/2 is engineered for the 2021-2023 Toyota GR Yaris (pre-facelift). The S-TY/T/3 is designed specifically for the 2024+ GR Yaris and GRMN Yaris facelift generation (XP210). They are not interchangeable between generations.

Is the Akrapovic S-TY/T/3 street legal?

No. The S-TY/T/3 is designed for race track and closed-circuit use only. It does not meet road-use emissions compliance requirements. It is not TUV or ABE approved for street use.

Does the S-TY/T/3 require cutting the factory exhaust?

Yes. Installation requires cutting the original factory exhaust system. This is a permanent modification. No ECU reprogramming is required for this bolt-on slip-on configuration.

What are the dyno-verified power gains for the S-TY/T/3?

Akrapovic dynamometer testing shows gains of +3.5 kW (4.8 hp) at 6,950 rpm and +4.9 Nm of torque at 6,950 rpm compared to a GR Yaris with the factory exhaust system.

How much weight does the S-TY/T/3 save?

The S-TY/T/3 weighs 6.8 kg, representing a 48.3% weight reduction versus the factory exhaust. This is a significant mass saving that contributes to improved agility and power-to-weight ratio on track.

Does the S-TY/T/3 also fit the GRMN Yaris?

Yes. The S-TY/T/3 is confirmed to fit both the 2024+ Toyota GR Yaris and the GRMN Yaris facelift variants built on the XP210 platform.

Why do the titanium tailpipes have a special coating?

The megaphone-shaped titanium tailpipes are specially coated to resist discoloration caused by extreme heat during track use. This preserves the appearance of the titanium surface even after repeated high-temperature operating cycles.

Is an Evolution Link Pipe available for the S-TY/T/3?

Yes. Akrapovic offers an optional Evolution Link Pipe for customers who want to extend the exhaust tuning possibilities and maximize performance beyond the standard slip-on configuration.

Does the S-TY/T/3 drone at highway speeds?

The S-TY/T/3 uses a triple-resonator design to acoustically tune the exhaust note across all RPM ranges. The system is specifically engineered to deliver a deep, enthusiastic race tone at idle and high RPM while eliminating resonance-based drone at sustained speeds.

Does the Akrapovic S-TY/T/3 come with a warranty?

Akrapovic exhaust systems are covered under the manufacturer's limited warranty for defects in materials and workmanship when used as specified. As a race-only product, warranty terms apply to track and closed-circuit use. Contact Black Ops Auto Works for full details.

Installation Overview

  1. Safely lift and support the vehicle; allow the exhaust to cool completely
  2. Remove factory exhaust components from the cut point rearward per Akrapovic installation instructions
  3. Cut the factory exhaust at the specified location
  4. Dry-fit the S-TY/T/3 to verify pipe routing and hanger alignment
  5. Install all supplied gaskets and hardware, tightening to Akrapovic torque specifications
  6. Torque all clamps and flanges evenly to prevent exhaust leaks
  7. Lower the vehicle, start the engine, and inspect all joints for leaks before track use

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.

Request For Information

Have questions about Akrapovic 2024+ Toyota GR/GRMN Yaris Slip-On Race Line (Titanium)? Fill out the form below and we'll get back to you by the next business day.
Akrapovic

Akrapovic

Akrapovic Exhaust Systems and Carbon Accessories are stocked at Black Ops Auto Works for Porsche 911, BMW M, Audi RS, Ferrari, Lamborghini, McLaren, Mercedes-AMG, C8 Corvette, Nissan GT-R, and select performance motorcycle builds. Shop Slip-On Line titanium exhausts, Evolution Line exhausts, Race Line systems, cat-back systems, link pipes, downpipes, sound kits, carbon fiber tips, titanium tail pipe sets, rear diffusers, and carbon accessories for the correct vehicle and build goal. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 161 Akrapovic Exhaust Systems and Carbon Accessories SKUs across exhaust system layouts, titanium components, tail pipe designs, valve controls, and vehicle-specific platforms. What This Akrapovic Collection Covers Premium titanium exhaust engineering Akrapovic products pair vehicle-specific engineering with titanium construction, precision exhaust rout...

View Akrapovic Products
Exhaust Systems

Exhaust Systems

Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...

View Exhaust Systems Products
Mufflers

Mufflers

Performance mufflers for street, track, and show builds are stocked at Black Ops Auto Works. Shop chambered mufflers, straight-through mufflers, tuned resonators, slip-on exhaust systems, and universal weld-in mufflers in stainless steel and titanium for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, EcoBoost, Porsche, BMW, and import platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 434 muffler SKUs across inlet size, outlet configuration, and sound level categories. What This Category Covers The Mufflers collection spans direct-fit muffler replacements, universal weld-in mufflers for custom exhaust builds, and complete slip-on exhaust systems for European sports cars. The catalog is strongest on Gibson, Corsa, MagnaFlow, MBRP, and GReddy mufflers for domestic trucks and muscle cars, with premium Akrapovic titanium slip-on systems for Porsche, BMW, and Ferrari platform...

View Mufflers Products
Mufflers & Resonators

Mufflers & Resonators

Mufflers and resonators for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop chambered mufflers, straight-through mufflers, turbo mufflers, muffler silencers, muffler delete pipes, standalone resonators, and slip-on exhaust systems for Mustang, Camaro, Challenger, Corvette, Wrangler, F-150, and import turbo platforms. Every product is filterable by inlet and outlet diameter, body size, overall length, and vehicle year, make, and model so the correct fitment ships the first time. Black Ops Auto Works carries 496 muffler and resonator SKUs across universal and direct-fit applications. What This Category Covers Mufflers and resonators are the sound-shaping heart of any exhaust system. A muffler controls overall volume and tone at the tailpipe, while a resonator upstream tames specific drone frequencies before they reach the cabin. Builders mix and match the two to dial in a sound profile that fits daily driving or track use. Muffler Types Chambered mufflers u...

View Mufflers & Resonators Products
Military & First Responder Discounts

Military & First Responder Discount Program

Black Ops Auto Works proudly honors active duty military, veterans, National Guard, reserves, police officers, firefighters, and EMTs with an exclusive 5% discount on all performance parts and carbon fiber upgrades. Verify instantly and start saving today.

Learn More & Apply

Your cart

×