Sold out
AMS T24A billet throttle body inlet side profile
AMS T24A throttle body inlet flange opening
AMS T24A billet inlet angled outlet and flange view
AMS logo machined into T24A throttle body inlet
AMS T24A throttle body inlet mounting flange detail
AMS T24A billet throttle body inlet elbow profile
Click to zoom in
View vehicle applications

Description

Remove the last restriction before the throttle body

AMS Performance AMS.60.08.0001-1 replaces the restrictive factory inlet elbow on Toyota's 2.4-liter T24A-FTS turbocharged engine. Its one-piece 6061-aluminum passage maintains a 60 mm internal diameter from the charge-pipe flange to the throttle body, giving the turbocharger a more direct airflow path without requiring an ECU calibration.

Key Features

  • 60 mm internal diameter through the inlet passage
  • 70 percent more cross-sectional area than the narrowest portion of the factory elbow
  • One-piece 6061 billet-aluminum construction with no welded seams in the flow path
  • Re-engineered bend angle directs airflow more smoothly into the throttle body
  • AMS flow-bench testing recorded up to 85 percent less pressure drop than the factory inlet at the tested airflow point
  • AMS dyno testing on a stock-tune 2024 Tacoma using 93-octane fuel recorded gains across the powerband, reaching a 15-wheel-horsepower peak
  • Compatible with factory and AMS charge pipes
  • AMS Performance AMS.60.08.0001-1 requires no cutting, trimming, or ECU calibration and can be returned to stock

Application details and restrictions

Years Make Model Engine and Powertrain Verified Configurations
2024 and newer Toyota Tacoma 2.4L T24A-FTS turbo; gas i-FORCE or hybrid i-FORCE MAX SR, SR5, TRD PreRunner, TRD Sport, TRD Off-Road, Limited, Trailhunter, TRD Pro
2024 and newer Toyota Land Cruiser 2.4L T24A-FTS turbo hybrid i-FORCE MAX only 1958, Base, First Edition
2025 and newer Toyota 4Runner 2.4L T24A-FTS turbo; gas i-FORCE or hybrid i-FORCE MAX SR5, TRD Sport, TRD Off-Road, TRD Sport Premium, TRD Off-Road Premium, Limited, Platinum, Trailhunter, TRD Pro

AMS has not completed CARB or EPA compliance testing for this product. It is not available for emissions-controlled vehicles located in California or for shipment to California addresses without a completed AMS Race Waiver. International owners must follow local laws. The factory sealing ring and mounting bracket transfer to the new inlet, and installation access differs between gas and hybrid vehicles.

Specifications

Detail Value
Manufacturer Part Number AMS.60.08.0001-1
Product Type Billet throttle body inlet elbow
Material Single-piece 6061 billet aluminum
Internal Diameter 60 mm
Charge-Pipe Compatibility Factory or AMS charge pipe
Calibration Requirement No ECU calibration required by AMS
Cutting or Trimming None required
Published Weight 1.85 lb
Published Package Dimensions 9 × 6.5 × 4 in
Condition New
Emissions Status CARB and EPA compliance testing not completed; California restrictions apply
California Proposition 65 Manufacturer warning applies

What's Included

  • One AMS Performance AMS.60.08.0001-1 billet throttle body inlet
  • AMS installation instructions
  • The factory mounting bracket and factory sealing ring must be transferred from the original inlet and are not included as new replacement parts
  • Charge pipe, throttle body, tools, and unrelated engine components are not included

About AMS Performance

AMS Performance develops forced-induction systems and airflow components through its SnailWorks engineering program. For this inlet, AMS used scans of the factory parts, mass-airflow flow-bench measurements, and back-to-back chassis-dyno testing to address the restriction immediately ahead of the T24A-FTS throttle body.

Related Parts

  • No related product is linked because charge-pipe and sealing components must be verified against AMS.60.08.0001-1, the exact vehicle, and the installed intake configuration.

FAQ

What is the AMS.60.08.0001-1?

It is AMS Performance's one-piece billet replacement for the restrictive factory throttle body inlet elbow on supported Toyota T24A-FTS turbo applications.

Which Toyota engines does this inlet fit?

It fits the 2.4-liter T24A-FTS turbocharged engine in the listed Tacoma, Land Cruiser, and 4Runner applications, subject to the powertrain requirements in the fitment table.

Does it fit both gas and hybrid Tacoma models?

Yes. AMS lists both gas i-FORCE and hybrid i-FORCE MAX Tacoma configurations. The installation sequence differs because hybrid models skip the belt and alternator removal steps.

Does it fit every current Land Cruiser powertrain?

AMS lists the 2.4-liter turbo hybrid i-FORCE MAX Land Cruiser application. Do not extend fitment to an unlisted engine or powertrain.

Will it connect to the factory charge pipe?

Yes. AMS states that the inlet works with the factory charge pipe and its compatible AMS charge pipe.

Is an ECU calibration required?

No. AMS states that no ECU calibration is required for this inlet.

Can the vehicle be returned to stock?

Yes. The installation is reversible because no cutting or trimming is required, provided the original inlet and transferred factory parts are retained.

Can this product be shipped for a California emissions-controlled vehicle?

Not without the manufacturer-required AMS Race Waiver. AMS states that CARB and EPA compliance testing has not been completed for this product.

Which factory parts are reused?

The mounting bracket, sealing ring, and applicable factory hardware transfer from the original throttle body inlet as directed by AMS.

Installation Instructions

  1. Disconnect the negative battery terminal and allow the engine to cool.
  2. Unlock the spring clips at the intercooler and throttle-body ends of the driver-side charge pipe, then remove the charge pipe.
  3. On non-hybrid models, compress and retain the serpentine-belt tensioner, remove the belt, unclip the engine harness, disconnect the alternator harness and power wire, and remove the alternator. Hybrid models skip these belt and alternator steps.
  4. Remove the bolt that secures the throttle-body inlet bracket to the engine and the two front inlet bolts.
  5. Access and remove the two rear inlet bolts from underneath the vehicle, then remove the factory inlet through the top of the engine bay.
  6. Transfer the factory bracket and sealing ring from the original inlet to the AMS inlet.
  7. Position the new inlet and gently walk the bolt nearest the bracket past the housing before threading it.
  8. Reinstall the remaining components in reverse order, lock both charge-pipe spring clips, reconnect the battery, and verify secure connections and leak-free operation before driving.

AMS Billet Throttle Body Inlet for Toyota T24A Turbo

AMS
AMSAMS.60.08.0001-1
010339180540800
Throttle Body Inlets
Out of stock
$ 299.95

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×