ANZO 1995-2005 Chevrolet S-10 Taillights Chrome 3D Style

Give Your S-10 or Sonoma a Sharp, Custom Tail Light Look Without Cutting a Single Wire

The ANZO 211032 tail lights deliver a bold 3D-style appearance for the 1994-2004 Chevy S-10 and GMC Sonoma using a clear lens paired with a polished chrome housing. These are a direct-fit, plug-and-play replacement that bolt into the factory mounting points and connect to the existing wiring harness. Whether you are refreshing a daily driver or finishing a custom build, the ANZO 211032 gives the rear of your truck a cleaner, more modern look that stands out from the factory red-lens originals.

Key Features

• 3D-style clear lens with chrome housing for a clean, custom appearance
• Direct OEM replacement with no cutting, drilling, or wiring modification required
• Compatible with 1994-2004 Chevy S-10 and GMC Sonoma (same body platform)
• Incandescent light source in red and white
• Sold as a pair covering both driver and passenger sides
• Manufactured in Taiwan to ANZO quality standards
• Designed for street use on named trim levels across the full model run
• Compact assembly dimensions: 5.85 in H x 20.28 in L x 10.02 in W

Fitment

The ANZO 211032 fits 1994-2004 Chevy S-10 and GMC Sonoma trucks sharing the GMT325 body platform. The store title references 1995-2005, but the manufacturer's confirmed fitment range is 1994-2004. Please verify against your VIN or consult ANZO support if you have any doubt about compatibility.

Specifications

What's Included

• 2 x ANZO 211032 3D-style tail light assemblies (driver and passenger)
• Hardware and mounting fasteners for direct OEM replacement
• Installation instructions

Note: Bulbs are NOT included. Reuse your existing factory bulbs or source compatible incandescent replacement bulbs separately before installation.

Frequently Asked Questions

Yes. The 211032 is designed for both the 1994-2004 Chevy S-10 and the GMC Sonoma, which share the same GMT325 body platform and identical tail light mounting locations. No modifications are needed for either application.

No. The 211032 assemblies do not come with bulbs. You will need to transfer your existing factory incandescent bulbs or purchase compatible replacements. Check your owner's manual or a bulb reference guide for the correct fitment for your year and model.

The ANZO 211032 is a direct OEM replacement and uses the factory wiring harness connector. No splicing, cutting, or additional wiring adapters are required. The harness plugs directly into the existing connector on your S-10 or Sonoma.

The factory tail lights on the 1994-2004 S-10 and Sonoma use a red lens with a standard interior. The 211032 replaces these with a clear lens and polished chrome housing in a 3D-style design, giving the rear of the truck a more aggressive and custom appearance while retaining full incandescent function.

Yes. The tail light assembly on the Chevy S-10 and GMC Sonoma is the same across regular cab and extended cab configurations for the 1994-2004 model years covered by the 211032. Both cab styles use the same rear panel and mounting points.

Yes. The confirmed manufacturer fitment for the ANZO 211032 runs from 1994 through 2004. If your truck has a 1994 or 2004 model year, it falls within the supported range. If your title documents list 1995 or 2005, please cross-reference the manufacturer fitment before ordering or contact ANZO support.

Most installations take 30 to 60 minutes with basic hand tools. The process involves removing the tailgate trim panel (if needed), unbolting the factory assemblies, disconnecting the harness plugs, connecting the ANZO 211032 harnesses, and securing the new assemblies with the original or supplied hardware. No specialty tools are required.

The 211032 assemblies are designed for street use and are intended to meet applicable lighting output requirements for stop, tail, and reverse functions. However, regulations on aftermarket lighting vary by state and jurisdiction. Check your local laws before installation to confirm compliance.

ANZO USA backs their lighting products with a limited warranty against manufacturer defects. Warranty coverage, duration, and claim procedures are managed directly by ANZO USA. Contact ANZO customer support at anzousa.com for current warranty terms and any claim assistance.

Installation Instructions

1. Disconnect the negative terminal of the battery before beginning work.
2. Open the tailgate and locate the tail light access screws or bolts on the inside of the bed or tailgate panel.
3. Remove the mounting hardware securing the factory tail light assembly to the body.
4. Carefully pull the factory assembly away from the body panel to expose the wiring harness connector.
5. Press the harness release tab and disconnect the factory connector from the existing tail light.
6. Connect the ANZO 211032 harness plug to the factory wiring connector until it clicks and seats securely.
7. Transfer the factory bulbs into the corresponding sockets on the ANZO 211032 assembly, or install compatible replacements.
8. Position the new assembly against the body panel and align the mounting holes.
9. Secure the assembly with the original or supplied mounting hardware. Do not overtighten.
10. Reconnect the battery negative terminal.
11. Test all functions including brake lights, turn signals, reverse lights, and running lights before returning the vehicle to service.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.