View vehicle applications
Fitment notes and restrictions
Description
Direct more ambient air through the 992 intercoolers
APR IC100030 replaces the factory ambient-air ducting on supported Porsche 911 992 3.0T models. APR's road testing recorded intake-air-temperature reductions of up to 9.6 degrees C, or 15 percent, compared with the stock ducts during repeated acceleration runs.
Key Features
- Organic matte carbon-fiber construction with gloss APR logo
- Directs more ambient air through the intercooler cores
- APR-tested IAT reduction of up to 9.6 degrees C or 15 percent
- Retains the factory intercooler post-housing ducting
- Plug-and-play fit with no extra hardware required
- Lightweight left- and right-side duct design
- APR emissions code 5
- Exact APR application is identified by manufacturer part number IC100030
Application details and restrictions
| Years / Scope | Make | Model / Component | Requirement |
|---|---|---|---|
| 2020-2024 | Porsche | 911 992 with 3.0T engine | Excludes Porsche Design rear bumper package |
APR excludes the Porsche Design rear bumper package, which is standard on GTS models and optional on other 911 variants. Do not use the broad 911 model-year range without confirming the 3.0T engine and rear-bumper configuration.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | IC100030 |
| Product Type | Intercooler ambient-air ducts |
| Material | Carbon fiber |
| Finish | Matte with gloss APR logo |
| Mounting Type | Plug-and-play |
| Engine Requirement | Porsche 992 3.0T |
| Emission Code | 5 |
| UPC | 810009935162 |
| California Proposition 65 | Warning applies |
What's Included
- APR IC100030: One left-side carbon-fiber intercooler duct
- One right-side carbon-fiber intercooler duct
- No additional mounting hardware is required according to APR
About APR
APR develops performance hardware and software for Audi, Volkswagen, Porsche, and related platforms. Its application-specific components are engineered around verified vehicle, engine, transmission, and emissions requirements rather than model name alone.
Related Parts
- No related store product is linked because supporting components must be verified for the exact vehicle, engine, transmission, and current APR configuration.
FAQ
What is the IC100030?It is intercooler ducts for the exact application and restrictions shown above.
How much did APR reduce intake-air temperature?APR recorded reductions up to 9.6 degrees C, or 15 percent, during repeated road acceleration testing.
Which Porsche 911 models are supported?APR lists 2020-2024 Porsche 911 models with the 3.0T engine, subject to the rear-bumper exclusion.
Will the ducts fit a GTS?No. APR excludes the Porsche Design rear bumper package, which is standard on GTS models.
Will they fit another model with the optional Porsche Design bumper?No. The exclusion also applies when that rear bumper package was ordered on another model.
Is extra hardware required?No. APR states that the ducts slide into place and retain the factory post-housing ducting.
What finish is used?The ducts have a matte carbon-fiber finish with a gloss APR logo.
Are the factory intercoolers retained?Yes. These ducts improve the ambient airflow path to the existing intercooler cores.
Installation Instructions
- Confirm the Porsche 911 is a supported 2020-2024 3.0T model without the Porsche Design rear bumper package and verify the APR IC100030 part label.
- Allow the vehicle to cool and review APR installation document TL100173 before removing rear body components.
- Remove the rear bumper and factory duct components only in the sequence specified by APR and the Porsche service procedure.
- Install the left and right carbon-fiber ducts in their correct positions while retaining the factory post-housing ducting.
- Verify that every tab and interface is fully seated and that no wiring, hose, fastener, or body component contacts the ducts.
- Reinstall the rear body components, confirm panel fit and airflow openings, then inspect the installation after the first heat cycle.
