Click to zoom in
The Complete Chassis Mounting Solution for Your ARB 5620010 Summit Rear Bumper Installation
The ARB 6172202 Bumper Mounting Kit provides all the chassis hardware required to properly install the ARB 5620010 Summit Rear Bumper on compatible vehicles. Installing a heavy-duty steel rear bumper without the correct mounting components risks structural failure and compromises both the bumper and chassis integrity. The 6172202 kit eliminates that risk by delivering a purpose-engineered bracket and fastener assembly that anchors the 5620010 bumper directly to the vehicle frame with the torque specifications and load ratings ARB engineers designed into the system. Whether you purchased the bumper as a standalone item or are completing an existing build, the ARB 6172202 is the required hardware link between the bumper and your chassis.
Key Features
- Purpose-built to mate directly with the ARB 5620010 Summit Rear Bumper chassis attachment points
- Engineered steel construction for maximum strength and long-term durability at mounting locations
- Includes all brackets, bolts, washers, and fasteners required for a complete installation
- Designed to ARB torque and load specifications for safe and legal fitment
- Finished to resist corrosion in off-road and trail environments
- 3-year ARB warranty covers defects in workmanship and materials
- Required for proper structural integration of the 5620010 bumper to the vehicle chassis
Specifications
| Detail | Value |
|---|---|
| Brand | ARB |
| Part Number (MPN) | 6172202 |
| UPC | 09332018139023 |
| Compatible Bumper | ARB 5620010 Summit Rear Bumper |
| Construction | Steel |
| Finish | Corrosion-resistant coating |
| Warranty | 3 Years (ARB) |
| Prop 65 | Yes |
What's Included
- ARB 6172202 chassis mounting bracket assembly
- All required bolts, washers, and fasteners for complete installation per ARB specifications
About ARB
ARB 4x4 Accessories has been designing and manufacturing premium off-road equipment in Australia since 1975. Every ARB product is engineered for real-world performance under demanding conditions, with rigorous testing and quality standards that have made ARB a trusted name in the global off-road community. ARB products are sold and supported through an extensive authorized dealer network across the United States.
Related Parts on Our Site
- This kit is required for installation of the ARB 5620010 Summit Rear Bumper for 2007-2014 Toyota FJ Cruiser
- Also compatible with the ARB 5620010B Summit Rear Bumper for Jeep Wrangler TJ JK JL
FAQ
What is the 6172202?The ARB 6172202 is the Bumper Mounting Kit designed specifically for use with the ARB 5620010 Summit Rear Bumper. It includes all chassis brackets and fasteners required to properly anchor the 5620010 bumper to the vehicle frame per ARB engineering specifications.
Do I need the ARB 6172202 if I already bought the 5620010 bumper?If your 5620010 bumper did not come with mounting hardware, the 6172202 is required for installation. Some 5620010 bundles include a fitting kit, so check your order contents. If mounting hardware is not included, order the 6172202 before beginning installation.
What vehicles does the ARB 6172202 fit?The 6172202 is designed to work with the ARB 5620010 Summit Rear Bumper, which fits the Toyota FJ Cruiser 2007-2014, Jeep Wrangler TJ, JK, and JL platforms, and other vehicles in the 5620010 application guide. Verify compatibility against the specific vehicle and bumper part number combination before ordering.
What hardware is included in the ARB 6172202 kit?The 6172202 includes all chassis mounting brackets, bolts, washers, and fasteners required for a complete structural installation of the ARB 5620010 bumper. No additional hardware purchases should be required for a standard fitment.
Can the ARB 6172202 be used with other ARB bumpers besides the 5620010?The 6172202 is engineered specifically for use with the ARB 5620010 Summit Rear Bumper and its platform variants. It is not a universal ARB mounting kit and should not be assumed compatible with other ARB rear bumper model numbers without verifying with ARB.
What torque specs apply to the ARB 6172202 mounting hardware?ARB provides specific torque values in the included installation instructions. Standard ARB hardware torque guidance is M10 = 44 Nm and M12 = 77 Nm. Always follow the specific instructions included with the 6172202 kit rather than general estimates.
Is the ARB 6172202 covered under warranty?Yes. As an ARB-branded product, the 6172202 is covered by ARB's 3-year unlimited-miles warranty against defects in workmanship and materials under normal use and proper installation conditions.
Is professional installation recommended for the ARB 6172202?Yes. Because this kit structurally mounts a heavy steel bumper to the vehicle chassis, professional installation is strongly recommended to ensure correct torqueing, alignment, and compliance with ARB's fitting specifications. Improper installation may void the warranty and create safety risks.
Installation Instructions
- Review the full ARB 6172202 installation guide included with the kit before beginning work.
- Ensure the vehicle is safely lifted and secured on jack stands before accessing chassis mounting locations.
- Remove any factory rear bumper hardware as directed in the ARB installation instructions.
- Position the 6172202 chassis mounting brackets at the specified attachment points on the vehicle frame.
- Hand-thread all bolts and fasteners before applying final torque to prevent thread cross-loading.
- Torque all M10 fasteners to 44 Nm and all M12 fasteners to 77 Nm per ARB specifications, unless the included instructions specify otherwise.
- With the mounting kit fully torqued, fit the ARB 5620010 bumper assembly to the installed brackets per the bumper installation instructions.
- Perform a final inspection of all fasteners after the bumper is loaded to confirm no settling or loosening has occurred.
WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
ARB
ARB parts and accessories for Jeep, Toyota Tacoma, 4Runner, Nissan Xterra, and other off-road trucks and SUVs are stocked at Black Ops Auto Works. Shop winch bars, front bumpers, skid plates, air lockers, on-board air compressors, tire inflation tools, recovery hitches, differential covers, and roof rack lighting for trail, overland, and 4x4 builds. Every product is filterable by year, make, model, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 718 ARB SKUs across bumpers, recovery, air systems, and off-road protection categories. What This Collection Covers ARB is an Australian 4x4 equipment manufacturer that builds winch bars, bumpers, skid plates, air lockers, and recovery gear engineered for serious off-road use rather than street or track applications. This collection groups ARB parts by the exact truck or SUV platform they were designed for so Jeep, Tacoma, 4Runner, and Xterra owners can shop their correct application. Platforms We Co...
View ARB Products
Brackets
Brackets and mounting hardware for trucks, SUVs, and performance cars are stocked at Black Ops Auto Works. Shop bumper mounting brackets, light bar and sensor relocation brackets, exhaust hanger kits, leaf spring and track bar brackets, caliper brackets, and roof rack mounting brackets for Ford, RAM, Chevrolet, Jeep, Subaru, and Toyota platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 472 bracket SKUs across bumper, suspension, exhaust, and accessory mounting categories. What This Category Covers Brackets are the mounting hardware that secures bumpers, light bars, sensors, exhaust systems, suspension components, and roof accessories to a vehicle chassis or body. Because brackets support such a wide range of systems, this collection spans multiple vehicle platforms and use cases rather than a single category, from off-road bumper hardware to exhaust hanger kits to suspen...
View Brackets Products
Fabrication
Shop Fabrication Parts and Materials at Black Ops Auto Works for stainless steel tubing, titanium tubing, aluminum charge piping, mandrel bends, V-band clamps, flanges, merge collectors, AN fittings, PTFE hose kits, braided fuel and oil lines, heat shields, welding supplies, brackets, bungs, and hardware for building custom exhaust systems, turbo plumbing, intercooler piping, and fuel system routing. Start with tubing in stainless, titanium, or aluminum in the right diameter and wall thickness, then add mandrel bends, flanges, V-bands, and clamps to complete the joint work. Black Ops Auto Works carries 5,866 fabrication SKUs from Vibrant Performance, Ticon Industries, Stainless Bros, Radium Engineering, Fragola, DEI, and ATP Turbo. Why Custom Fabrication Custom fabrication solves fitment problems that no universal or pre-bent kit can address. Raw tubing, flanges, and fittings give the fabricator freedom to route exhaust around a turbo, snake charge pipe around accessories, hard-...
View Fabrication Products