Size Chart
×
Restore controlled wheel movement and dependable four-wheel-drive response with this application-specific Old Man Emu damper. Old Man Emu Nitrocharger Plus shocks combine off-road dependability with smooth, on road driving and affordability. Nitrocharger Plus has been tested and tuned specifically to the vehicle providing performance across various driving conditions with vehicle-specific damping, tuned for different loads and vehicle setups. These dampers minimize body roll Confirm the complete vehicle, load, position, paired components, and current ARB instructions before ordering.
Key Features
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 1986-1995 | Toyota | 4Runner | 86-95 Toyota 4Runner Nitrocharger Plus Shock - Front |
| 1986-1994 | Toyota | Pickup | 86-95 Toyota 4Runner Nitrocharger Plus Shock - Front |
Specifications
| Brand | Old Man Emu |
|---|---|
| Manufacturer Part Number | 63072 |
| Product Type | Shocks and Struts |
| Fitment Type | Vehicle Specific |
| Condition | New |
What's Included
One new Old Man Emu shocks and struts package identified by manufacturer part number 63072. Springs, dampers, bushings, mounts, liners, fasteners, and fitting hardware are included only when expressly listed for this exact part number.
About Old Man Emu
Old Man Emu is ARB's suspension division, developing integrated springs, dampers, and hardware for four-wheel-drive control, load support, and durability. Every rate, position, load range, and vehicle application remains part-number specific.
Related Old Man Emu Products
Frequently Asked Questions
How do I confirm Old Man Emu 63072 is correct for my vehicle?
Match the listed year, make, and model where published, then confirm drivetrain, axle position, body style, constant accessory load, intended ride height, and every current ARB application note.
Should these dampers be replaced in pairs?
Replace dampers by axle unless ARB expressly specifies otherwise, then inspect the springs, mounts, bushings, bump stops, brake hoses, and alignment.
Will installing these dampers change ride height?
A damper alone does not establish the final ride height. Springs, load, mounting position, trim, suspension geometry, and the complete Old Man Emu setup determine the result.
Installation Instructions
Follow the current ARB instructions and vehicle service information for Old Man Emu part number 63072. Safely support the vehicle, record ride height, use the specified spring-handling and torque procedures, preserve brake, sensor, and tire clearance, verify full suspension travel, then complete the required alignment and fastener rechecks before normal driving.
Shop Old Man Emu suspension by exact manufacturer part number and verified vehicle application. The ARB suspension range includes Nitrocharger dampers, BP-51 and MT64 systems, coil springs, leaf springs, control arms, bushings, and installation hardware for selected four-wheel-drive vehicles. Choosing Old Man Emu Suspension Match the exact Old Man Emu or ARB manufacturer part number Confirm year, make, model, body style, drivetrain, axle position, and every application note Calculate constant accessory weight separately from variable cargo and towing load Select the correct spring rate, damper, intended ride height, and front or rear position Verify bushings, mounts, U-bolts, liners, fitting kits, and other components required for installation Related Suspension Collections ARB Products Suspension Parts Shocks and Struts Lift Kits Frequently Asked Questions How do I select the correct Old Man Emu spring load?Add the constant weight of permanently installed bumpers, winches, rac...
View Old Man Emu Products
Shocks and struts for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop front and rear shocks, loaded strut assemblies, monotube shocks, twin-tube shocks, reservoir shocks, and steering dampers for daily drivers, lifted trucks, tow rigs, off-road builds, and muscle cars on Hellcat, Trackhawk, TRX, HEMI, LS, LT, Coyote, and EcoBoost platforms. Every shock and strut is filterable by year, make, model, trim, drivetrain, front or rear position, and ride height so the correct part ships the first time. Black Ops Auto Works carries 5,188 shock and strut SKUs across construction type, application, and vehicle use. What This Category Covers Shocks and struts damp spring oscillation so the tire stays planted on the road and are the most common suspension replacement job on any vehicle. A shock absorber is a standalone damping unit that bolts between the chassis and axle or lower control arm. A strut is a structural suspension member that combines damping with the sp...
View Shocks and Struts Products
Suspension parts and complete kits for cars, trucks, SUVs, Jeeps, and off-road builds are stocked at Black Ops Auto Works. Shop coilovers, lowering springs, lift kits, leveling kits, shocks and struts, sway bars, control arms, tie rods, ball joints, bushings, chassis bracing, alignment hardware, air suspension, and complete stage kits from Bilstein, KW, Ohlins, Fox, KING, ICON, BC Racing, Silvers, Eibach, H&R, Swift Springs, Whiteline, Energy Suspension, Moog, SPC Performance, Rough Country, ReadyLIFT, BDS, Skyjacker, Air Lift, Firestone, and Black Ops Auto Works. Start with a matched shock and spring package or a full coilover kit, then layer in sway bars, chassis bracing, and camber adjustment hardware. Every part is filterable by year, make, model, trim, and drivetrain to confirm fitment before ordering. What This Category Covers Suspension is the highest-leverage handling upgrade on any vehicle. A properly matched shock, spring, and sway bar package produces measurable i...
View Suspension Products