View vehicle applications
Fitment notes and restrictions
Description
Complete or service a compatible Old Man Emu suspension installation with this exact specification-matched component. Upper control arms can be found on independent front suspension (IFS) vehicles, acting as the middleman between the vehicle frame and knuckle spindle. Front upper control arms are designed to keep the front wheels aligned, limit articulation, and ensure optimum handling on and off-road. Old Man Emu Upper Control Arms bring the alignment cams back into an Confirm the complete vehicle, load, position, paired components, and current ARB instructions before ordering.
Key Features
- Tubular steel construction with forged eyelet and ball joint housings for exceptional strength without unnecessary weight.
- Forged ball joint housing engineered to handle the stresses of elevated suspension travel.
- If the vehicle has a ride-height sensor on the upper control arm, disconnect the sensor linkage before removing the arm.
- If a ride-height sensor was removed, reattach the sensor linkage using the applicable adapter bracket.
- Lower the vehicle to the ground so the suspension rests under its own weight, then torque the bushing pivot hardware to factory specification (typically 122 ft-lbs).
- Heavy-duty greaseable ball joint with a protective cap to resist contamination and extend service life.
Fitment
| Years | Make | Model | Application Notes |
|---|---|---|---|
| 2021-2025 | Ford | F-150 | OME 2021+ Ford F150 (EXCL CCD SUSP) Front Upper Control Arms - Pair |
Specifications
| Brand | Old Man Emu |
|---|---|
| Manufacturer Part Number | UCA0017 |
| Product Type | Control Arms |
| Fitment Type | Vehicle Specific |
| Condition | New |
What's Included
One new Old Man Emu control arms package identified by manufacturer part number UCA0017. Springs, dampers, bushings, mounts, liners, fasteners, and fitting hardware are included only when expressly listed for this exact part number.
About Old Man Emu
Old Man Emu is ARB's suspension division, developing integrated springs, dampers, and hardware for four-wheel-drive control, load support, and durability. Every rate, position, load range, and vehicle application remains part-number specific.
Related Old Man Emu Products
- Shop all Old Man Emu suspension products
- ARB / OME 2021+ Ford F150 Leaf Spring Spacer
- Old Man Emu Leaf Spring U-Bolt 2021-2025 Ford F-150
- ARB OME Front UCA for 2007+ Toyota Land Cruiser 200 series (Pair)
Frequently Asked Questions
How do I confirm Old Man Emu UCA0017 is correct for my vehicle?
Match the listed year, make, and model where published, then confirm drivetrain, axle position, body style, constant accessory load, intended ride height, and every current ARB application note.
Is this service part sold individually or as a kit?
Use the exact listing quantity and current ARB parts diagram. Similar liners, bushes, bolts, spacers, and fitting kits can differ by size and compatible suspension component.
Can this hardware be reused during suspension service?
Reuse only when the vehicle and ARB service procedures expressly allow it and inspection confirms the component remains within specification. Replace damaged, worn, stretched, or corroded hardware.
Installation Instructions
Follow the current ARB instructions and vehicle service information for Old Man Emu part number UCA0017. Safely support the vehicle, record ride height, use the specified spring-handling and torque procedures, preserve brake, sensor, and tire clearance, verify full suspension travel, then complete the required alignment and fastener rechecks before normal driving.




