Click to zoom in
This ARB electrical or control component is the Wiring Loom V2. Match voltage, connector, switch or sensor function, current requirements, wiring configuration, mounting location, and compatible ARB system.
Key Features
- Power has been pushed to 165W per light for the AR32s and 105W for the AR21s.
- To maximize cooling the die-cast aluminum body acts as a heat sink and allows the dissipation of heat from the LEDs quickly.
- With an air bag equipped vehicle for example it is essential that the vehicle's crush rate and air bag triggering is not altered when a bull bar is installed.
- What's more we're also constantly on the lookout for new ways to improve our business practices from distribution to customer service.
- The Intensity spot-light configuration uses advanced optics via the latest Hyperspot technology.
- The Intensity flood-light configuration has been updated to spread the light further down the road.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| Universal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note. | |||
Specifications
| Brand | ARB |
|---|---|
| Manufacturer Part Number | 3500480 |
| Product Type | Wire Loom |
| Condition | New |
| Configuration | Wiring Loom V2 |
What's Included
One new ARB wire loom in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.
About ARB
ARB develops vehicle-specific four-wheel-drive equipment, including protection, suspension, Air Lockers, compressed-air systems, racks, recovery equipment, lighting, and touring accessories. Every application, load rating, interface, and included component remains exact-part specific.
Important Disclosures
- California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.
Related Parts
Frequently Asked Questions
How do I confirm this works with my ARB accessory system?
Match the exact controller, accessory, voltage, connector, wiring version, current requirements, and software or module compatibility.
Is a relay or fuse required?
Use the protection, switching, wire gauge, and grounding method specified for the exact electrical load and installation.
What should be tested before driving?
Verify connectors, grounds, fuse protection, wire routing, control functions, warning indicators, and normal operation of every connected accessory.
Installation Instructions
- Confirm ARB part number 3500480, the complete application, and every required supporting component before beginning work.
- Disconnect power as directed, then route the correct wire gauge, fuse or breaker, relay, grounds, connectors, switches, and control modules safely.
- Test every function and warning indicator, inspect current draw and wire temperature, and secure the harness away from heat, abrasion, and moving parts.
ARB
Shop ARB 4x4 equipment by exact manufacturer part number, vehicle application, axle, rack platform, compressor requirement, and recovery rating. This collection includes Air Lockers, bumpers, underbody protection, BASE Rack components, air systems, recovery equipment, lighting, camping gear, and service parts for off-road and overland builds. ARB Air Lockers and Drivetrain Parts ARB Air Lockers provide selectable differential lock for supported axle applications. Confirm the axle model, spline count, carrier break, gear ratio, compressor requirement, and every application note before ordering. Differential covers, switches, solenoids, air lines, and service components must match the installed locker system. Bumpers and Vehicle Protection Vehicle-specific bumpers, winch bars, skid plates, rock protection, and mounting systems depend on the complete year, make, model, trim, body configuration, sensors, cameras, and factory equipment. Review the fitment table and included hardware for ...
View ARB Products
Fabrication
Shop automotive fabrication parts, tubing, fittings, hoses, clamps, and welding supplies at Black Ops Auto Works. Find components for custom exhaust routing, intake plumbing, fuel and oil lines, mounting solutions, and heat protection. Compare materials and hardware from Vibrant Performance, Stainless Bros, Ticon Industries, Radium Engineering, Mishimoto, Kooks, and other brands by exact dimensions and intended application. Stainless Steel, Aluminum, and Titanium Tubing Choose tubing, bends, and fabrication sections for your project’s routing and material requirements. This collection includes steel, aluminum, and titanium tubing categories, with selected T304 and SS321 stainless products. Compare outside diameter, wall thickness, straight length, bend angle, and centerline radius before planning cuts and joints. Explore the Stainless Bros collection for additional stainless tubing, mandrel bends, pie cuts, flanges, and exhaust fabrication components. Exhaust Flanges, Clamps, and Sl...
View Fabrication Products