Click to zoom in
SKU: 300-8337 | UPC: 672036012397
ARP M12 X 1.25 12pt Nut Kit (Pack of 10) for Honda K-Series Toyota 2JZ-GTE Subaru EJ
ARP M12 x 1.25 12-point nut kit contains 10 high-strength nuts designed for ARP head studs and rod bolts in performance engines. Fits Honda K20 K24 Toyota 2JZ-GTE Subaru EJ25 Mitsubishi 4G63 applications for secure fastening during engine builds. These nuts ensure even clamp load and resist fatigue in high-horsepower street and track setups.
Key Features
- 8740 Chromoly Construction: Forged steel heat-treated to 200000 PSI tensile strength for extreme durability under boost and high RPM
- 12-Point Design: Thin-wall 12-point head allows high torque application in tight spaces with positive engagement
- Black Oxide Finish: Provides corrosion resistance and reduced friction for accurate torquing and long service life
- Precise Thread Fit: M12 x 1.25 threads match ARP Pro Series studs perfectly without galling or cross-threading
- Pack of 10: Complete quantity for most cylinder head or connecting rod applications with spares for builds
Product Notes
- Inspect studs for thread damage before nut installation to prevent stress risers
- Store in dry conditions to maintain black oxide protection
- Lightweight design ships compact without added handling fees
Installation Notes
- Professional installation recommended.
- Clean all threads thoroughly and apply ARP Ultra-Torque lubricant on nut threads and underside
- Torque to ARP-specified values in sequence then recheck after 100 miles or heat cycles
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2002-2006 | Acura | RSX | Type-S (K20A2) |
| 2006-2011 | Honda | Civic | Si (K20Z3) |
| 2005-2016 | Honda | CR-V | All (K24) |
| 2007-2013 | Honda | Fit | Sport (K20Z4) |
| 1993-1998 | Toyota | Supra | Turbo (2JZ-GTE) |
| 2004-2021 | Subaru | Impreza | WRX STI (EJ25) |
| 1989-2015 | Mitsubishi | Lancer Evolution | All (4G63) |
| 1999-2002 | Nissan | Skyline GT-R | R34 (RB26DETT) |
Why Choose ARP?
- Decades of motorsport fastener innovation trusted by NHRA and Formula teams
- Engineered for 50% higher preload than OEM hardware in dyno-tested conditions
- Made in USA with exact tolerances to prevent stud stretch or failure
Frequently Asked Questions
-
Q: Does this kit fit ARP head studs for K-Series engines?
A: Yes ARP 206-4307 and similar K20 K24 kits use these exact M12 x 1.25 nuts for cylinder head installation -
Q: What material and strength rating?
A: Forged 8740 chromoly steel heat-treated to 200000 PSI tensile strength with black oxide finish -
Q: What warranty applies and installation support?
A: Limited lifetime warranty against defects ARP provides torque specs and tech support via website or 800-826-3045
Shipping & Handling
- Method: UPS Ground
- Availability: In stock - ships same or next business day
- Packaging: ARP retail box 3.75 x 2.75 x 1.25 inches
- Weight: 0.15 lbs
ARP Head Studs
ARP head stud kits for internal engine builds are stocked at Black Ops Auto Works. Shop ARP head stud and bolt kits, main stud kits, and rod bolt kits engineered for HEMI, Ford Modular and Coyote, GM LS, Subaru EJ, Honda K and B series, VW/Audi turbo four cylinders, Porsche, BMC, and Renault engines, along with the Ultra-Torque assembly lubricant every kit depends on. Every product is filterable by year, make, model, and engine platform so the correct fastener kit ships the first time. Black Ops Auto Works carries 812 ARP Head Studs SKUs across 8740 chromoly and ARP2000 alloy options. What This Collection Covers ARP head studs replace factory head bolts with precision-machined threaded studs that thread into the block and allow the nut to be torqued concentrically on a stationary fastener, producing more even and repeatable clamping force across the entire head gasket surface than a factory head bolt design. This collection focuses on the internal engine fasteners that hold the ...
View ARP Head Studs Products
Hardware
Engine hardware, fasteners, and mounting hardware kits for builds, fabrication, and suspension work are stocked at Black Ops Auto Works. Shop ARP engine bolts and stud kits, suspension mounting hardware from Fox and Rock Krawler, bumper mount kits, tie rod clamps, joint retainer tools, and single and kit-packaged hardware for domestic, import, and off-road platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 945 Hardware SKUs across engine hardware, suspension mounting hardware, and single-piece or kit-packaged fasteners. What This Collection Covers Hardware groups together the fasteners, mounting kits, clamps, and small components that hold engines, suspension systems, and accessories together. This includes ARP engine hardware such as intake manifold bolts and cam bolt kits, suspension mounting hardware from Fox and Rock Krawler for shock and steering stabilizer installs...
View Hardware Products
Hardware Kits - Other
Hardware kits and fastener assortments for engine builds, suspension installs, body and trim jobs, and off road rigs are stocked at Black Ops Auto Works. Shop ARP bolt and stud kits, brake caliper hardware, suspension bushing hardware, leaf spring hardware kits, security fastener kits, and general clip and retainer assortments across domestic and import platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 593 Hardware Kits - Other SKUs across engine, suspension, body, and lighting hardware categories. What This Category Covers The Hardware Kits - Other category groups together fastener kits and hardware assortments that do not fall under a single dedicated part category. Coverage spans engine fastener kits like cam bolts and intake manifold bolts, suspension hardware including bushing pivot washers and leaf spring hardware, seat belt mounting hardware, security hardware fo...
View Hardware Kits - Other Products