ARP Pre 92 Mitsubishi 4G63 Flexplate Bolt Kit

Shop ARP head studs, main studs, rod bolts, flywheel and flexplate bolts, pressure-plate hardware, wheel studs, engine fasteners, assembly tools, and Ultra-Torque lubricant by exact manufacturer part number. Match the engine family, application, thread, length, material, strength series, quantity, lubricant, and preload procedure before ordering. ARP Head Studs and Main Stud Kits ARP head and main stud kits are engineered for specific engine families, blocks, cylinder heads, main-cap arrangements, fastener materials, and clamping requirements. Confirm the exact engine code and ARP part number, then follow the current instructions supplied with that kit. Do not assume that a similar-looking kit or a factory torque value is interchangeable. Rod, Flywheel, Flexplate, and Pressure-Plate Bolts Critical rotating-assembly hardware must match thread diameter and pitch, under-head or overall length, shank, head style, material, quantity, and mating component. Use the specified tightening met...

Find Eagle Talon gauge mounts and engine-service components by generation and installed powertrain. First- and second-generation cabin applications and a DSM 4G63 damper should each follow their own coverage. Gauge Pods by Cabin Application AutoMeter lists separate 1990–1994 and later Eclipse/Talon pod applications. Compare the exact single, dual or triple arrangement, nominal 52mm gauge size and any body exclusions. A pod is a mounting component. Choose instruments by depth and measurement, then plan the sender, signal source and wiring that those gauges require. DSM Damper and Suspension Service The listed Fluidampr component identifies a Mitsubishi 4G63/T DSM engine application. Confirm the engine actually installed and review mounting and accessory-drive requirements rather than assuming every Talon powertrain is identical. Strut mounts and protection pieces follow the actual axle and assembly. Compare bearings, boots, bump stops and hardware independently from the complete damp...

Engine hardware, fasteners, and mounting hardware kits for builds, fabrication, and suspension work are stocked at Black Ops Auto Works. Shop ARP engine bolts and stud kits, suspension mounting hardware from Fox and Rock Krawler, bumper mount kits, tie rod clamps, joint retainer tools, and single and kit-packaged hardware for domestic, import, and off-road platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 945 Hardware SKUs across engine hardware, suspension mounting hardware, and single-piece or kit-packaged fasteners. What This Collection Covers Hardware groups together the fasteners, mounting kits, clamps, and small components that hold engines, suspension systems, and accessories together. This includes ARP engine hardware such as intake manifold bolts and cam bolt kits, suspension mounting hardware from Fox and Rock Krawler for shock and steering stabilizer installs...

Hardware kits and fastener assortments for engine builds, suspension installs, body and trim jobs, and off road rigs are stocked at Black Ops Auto Works. Shop ARP bolt and stud kits, brake caliper hardware, suspension bushing hardware, leaf spring hardware kits, security fastener kits, and general clip and retainer assortments across domestic and import platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 593 Hardware Kits - Other SKUs across engine, suspension, body, and lighting hardware categories. What This Category Covers The Hardware Kits - Other category groups together fastener kits and hardware assortments that do not fall under a single dedicated part category. Coverage spans engine fastener kits like cam bolts and intake manifold bolts, suspension hardware including bushing pivot washers and leaf spring hardware, seat belt mounting hardware, security hardware fo...

Compare Mitsubishi Eclipse intakes, gauge mounts and engine accessories by exact generation, engine and transmission. Turbocharged 2.0L, other four-cylinder and V6 applications require separate systems. Intake System by Engine and Transmission Match the exact Injen number to engine, production and transmission. The displayed 2.4L manual-transmission system is a different application from 2.0L turbo, 3.0L V6 or 3.8L V6 references. Confirm sensor connections, hoses, brackets and installation layout. Compare short-ram and cold-air versions by complete supported application rather than finish color. Gauge Pods and Engine Covers For the 1995–1999 triple pillar pod reference, confirm body application and the stated convertible exclusion. Match gauge diameter, depth and wiring/hose routing separately. A turbo spark-plug-wire cover requires the exact engine and attachment layout. Floor mats need their own supported footwell shape, retention and pedal clearance. Choose Your Part Identify ex...

Find Mitsubishi Galant induction, engine-drive and brake-service components by exact generation and installed engine. V6 intake and 4G63/4G63T damper references describe separate powertrain applications. Intake and Crank-Damper Interfaces For the displayed 3.0L V6 Injen short-ram reference, confirm exact production, sensor connections, hoses and mounting. Finish color does not determine compatibility. For a DSM 4G63/4G63T damper, identify actual engine/crank and accessory-drive arrangement. Match attachment, belt layout, alignment and required fasteners with the exact manufacturer application. Parking Brakes and Suspension Service Compare parking-brake shoe/drum dimensions, hardware and axle configuration. Sebring drum or Eclipse shoe references need exact Galant support. Match strut mounts/boots to service position and actual suspension. Any EFI performance system requires a separate check of engine, induction, fuel and controls. Choose Your Part Identify Galant generation and act...

Find Plymouth Laser engine, gauge-mounting and suspension parts for the installed powertrain and chassis. Separate a 4G63/T engine component from body-specific interior and damper applications. Engine Damper and Gauge Mounting For the Fluidampr 4G63/T DSM reference, confirm exact engine, crank attachment and accessory-drive compatibility. Internally balanced application wording does not establish every Laser engine. AutoMeter’s 1990–1994 Eclipse/Talon/Laser dual A-pillar pod supports two 2-1/16-inch gauges. Review gauge depth, mounting and instrument requirements separately from the pod itself. Suspension and EFI Packages Compare Excel-G and AGX rear references using exact drivetrain/chassis coverage, mounts and travel. Check mount, bearing, boot and damper contents separately. An EFI nitrous package needs confirmed engine/fuel-system support and specified controls. Bottle choices and advertised system range do not establish complete installation suitability or guaranteed output. Ch...