Click to zoom in
This ARP performance fastener, stud, bolt, tool, or assembly is the Standard 1.7 OAL 1/2 Hex Socket Size Carburetor Stud Kit. Confirm the exact engine or vehicle application, thread size, length, material, strength series, included quantity, installation lubricant, tightening sequence, and current ARP torque specification before ordering.
Key Features
- Genuine ARP Fasteners: 8740 chromoly steel construction rated 200000 PSI tensile strength for dependable clamping force under boost nitrous high compression.
- Matched Hardware: Includes 0.500 ID x 1.000 OD x 0.060 thick hardened washers and black oxide 12-point nuts for complete easy assembly.
- Threads measure 1/2-20 x 1.700 inch OAL socket 1/2 inch hex nuts 5/16-18 12-point washers steel hardened.
- Fits Chevy small block 283-400 1955-1997 big block 396-454 1965-1996 Ford 289-302 1962-1995 351W-Cleveland 1969-1995 in Camaro Corvette Mustang trucks with Holley 4150 carbs 1.7 inch stud height.
- Stud Design: Minimizes intake manifold block thread wear versus bolts while delivering improved torque consistency across heat cycles.
- Precision-Rolled Threads: 1/2-20 stud threads and 5/16-18 nut threads ensure maximum engagement strength and repeatable torque values.
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| Universal or specification-matched application. Verify every dimension, interface, load or operating requirement, and listing note. | |||
Specifications
| Brand | ARP |
|---|---|
| Manufacturer Part Number | 200-2401 |
| Product Type | Head Stud & Bolt Kits |
| Condition | New |
| Configuration | Standard 1.7 OAL 1/2 Hex Socket Size Carburetor Stud Kit |
| Genuine ARP Fasteners | 8740 chromoly steel construction rated 200000 PSI tensile strength for dependable clamping force under boost nitrous high compression |
| Stud Design | Minimizes intake manifold block thread wear versus bolts while delivering improved torque consistency across heat cycles |
| Precision-Rolled Threads | 1/2-20 stud threads and 5/16-18 nut threads ensure maximum engagement strength and repeatable torque values |
| Matched Hardware | Includes 0.500 ID x 1.000 OD x 0.060 thick hardened washers and black oxide 12-point nuts for complete easy assembly |
| Versatile Application | Works with square flange carbs on stock aftermarket intakes for carbureted V8 builds from 1955 to 1997 |
| Q | What material and finish on the studs nuts washers? A: Forged 8740 chromoly steel black oxide finish studs rolled threads nuts 12-point steel washers hardened for corrosion resistance durability |
| Method | UPS Ground or USPS Priority |
| Availability | In stock - ships same or next business day |
| Packaging | ARP branded box 6 x 4 x 1 inches protective foam insert |
| Weight | 0.35 lbs |
| Key Features Genuine ARP Fasteners | 8740 chromoly steel construction rated 200000 PSI tensile strength for dependable clamping force under boost nitrous high compression |
What's Included
One new ARP head stud & bolt kit in the exact configuration and quantity identified by this listing. Brackets, wiring, air lines, fittings, switches, fasteners, fitting kits, fluids, covers, and accessories are included only when expressly stated for this exact part.
About ARP
Automotive Racing Products manufactures high-performance studs, bolts, nuts, washers, wheel hardware, assembly tools, and installation lubricants for engine, drivetrain, chassis, and racing applications. Thread dimensions, material, preload method, lubricant, torque, and included quantity remain exact-part specific.
Important Disclosures
- California Proposition 65 warning applies. Review the current manufacturer warning before handling or installation.
Related Parts
- Shop all ARP products
- ARP 01-10 6.6L GM Duramax Diesel Head Stud Kit
- ARP 02-06 Mini Cooper Head Bolt Kit
- ARP 02-06 Mini Cooper S Head Stud Kit
Frequently Asked Questions
How do I confirm the Standard 1.7 OAL 1/2 Hex Socket Size Carburetor Stud Kit fits my application?
Match the exact engine family or vehicle, component location, thread diameter and pitch, under-head length, material, strength series, and every current ARP application note.
Can I reuse the factory torque value with this ARP hardware?
Not automatically. Use ARP's current instructions for the exact part, material, lubricant, tightening sequence, and preload method. Factory torque values may be based on different hardware and friction.
What is included with this ARP kit?
Only the studs, bolts, nuts, washers, lubricant, and tools expressly listed for this exact part number are included. Verify the required quantity before disassembly.
Installation Instructions
- Confirm ARP part number 200-2401, the complete application, and every required supporting component before beginning work.
- Clean and inspect all mating threads and components, then verify thread engagement, length, washers, nuts, lubricant, and required preparation before assembly.
- Follow ARP's current tightening sequence, lubricant instructions, torque or stretch method, and any retorque procedure for this exact part.
- Verify clearance, preload, fastener seating, and normal component operation before returning the vehicle or engine to service.
ARP Head Studs
Shop ARP head studs, main studs, rod bolts, flywheel and flexplate bolts, pressure-plate hardware, wheel studs, engine fasteners, assembly tools, and Ultra-Torque lubricant by exact manufacturer part number. Match every engine, vehicle, thread, length, material, strength series, quantity, lubricant, and preload requirement before ordering. Head Studs and Main Studs Head and main stud kits are specific to the engine family, block, cylinder head, main-cap arrangement, material, and required clamping load. Confirm the exact engine generation and ARP series, then follow the current lubricant, tightening sequence, torque, or stretch instructions supplied for that kit. Rod, Flywheel, Flexplate, and Pressure-Plate Hardware Critical rotating-assembly fasteners must match thread diameter and pitch, under-head or overall length, shank, head style, material, quantity, and mating component. Similar-looking fasteners are not interchangeable, and factory torque values may not apply to ARP hardwar...
View ARP Head Studs Products
Head Components
Cylinder head components and engine internals for performance builds and OE service are stocked at Black Ops Auto Works. Shop complete cylinder heads, head gaskets, head stud and bolt kits, rocker arms, lifters, camshaft and lifter kits, rotating assemblies, and main stud and bolt kits for LS, LT, HEMI 5.7/6.1/6.4, Coyote, Cummins, Powerstroke, VW/Audi turbo, Subaru, Nissan, and import platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 972 Head Components SKUs across component type, engine platform, and bore or gasket specification. What This Collection Covers Head Components groups together the parts that live at and around the cylinder head, the area of the engine most affected by heat, combustion pressure, and clamping load. This includes complete heads, head gaskets, head studs and bolts, rocker arms, lifters, camshaft and lifter kits, main stud and bolt kits, and ro...
View Head Components Products
Head Stud & Bolt Kits
Head Stud and Bolt Kits for LS, Gen III Hemi, Coyote and Ford Modular, Toyota 2JZ, Nissan RB26, Subaru EJ, Honda K-series, Mitsubishi 4G63, VW 1.8T, and Power Stroke applications are stocked at Black Ops Auto Works. Shop ARP head studs, head bolts, L19 studs, Custom Age 625+ studs, Pro Series hardware, cylinder head fasteners, MLS gasket support, and boosted engine hardware for proven street, drag, road course, and high horsepower engine builds. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 199 head stud and bolt SKUs across the fitments and build levels enthusiasts actually use. What Head Stud and Bolt Kits Cover This collection includes cylinder head stud kits, head bolt kits, nuts, washers, and high-strength fastening solutions for stock rebuilds, boosted street engines, race engines, and diesel performance applications. The correct fastener supports reliable head gasket cl...
View Head Stud & Bolt Kits Products