View vehicle applications
Fitment notes and restrictions
Description
Lower the rear-drive G42 M240i while retaining a progressive street spring rate
AST Suspension ASTLS-22-293 is a progressive lowering spring set for the supported BMW M240i G42 rear-wheel-drive coupe. The exact drop, body style, drive layout, retained suspension equipment, and restrictions below must be confirmed before installation.
Key Features
- AST Suspension ASTLS-22-293 is matched to the verified application and configuration
- Progressive spring design for the stated application
- Cold-coiled on Wafios machinery
- Direct replacement for the supported original spring locations
- Manufacturer-specified ride-height change: 30 mm front and 25 mm rear; approximately 10 mm less on vehicles with M Sport suspension
- Lifetime manufacturer warranty against spring breakage under current terms
- Professional alignment required after installation
Application details and restrictions
| Years | Make | Model | Requirements and Restrictions |
|---|---|---|---|
| 08/2021-present | BMW | M240i | G42 coupe; rear-wheel drive only; excludes xDrive; approximately 10 mm less lowering with M Sport suspension |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | ASTLS-22-293 |
| Spring Design | Progressive |
| Manufacturing | Cold-coiled on Wafios machinery |
| Front Lowering | 30 mm nominal; approximately 20 mm with M Sport suspension |
| Rear Lowering | 25 mm nominal; approximately 15 mm with M Sport suspension |
| Warranty | Lifetime against spring breakage under current AST terms |
| Chassis / Body | G42 coupe |
| Drive Restriction | Rear-wheel drive only; not suitable for xDrive |
| M Sport Note | Approximately 10 mm less lowering than the nominal figures |
What's Included
- One exact AST Suspension ASTLS-22-293 lowering spring set for the stated application
- Dampers, mounts, tools, alignment service, and unrelated suspension parts are not included
About AST Suspension
AST Suspension engineers and manufactures dampers, coilovers, lowering springs, and motorsport suspension hardware in the Netherlands. Exact vehicle configuration, axle layout, retained factory equipment, ride-height change, and alignment requirements must be confirmed before installation.
Related Parts
- Inspect retained dampers, mounts, bump stops, isolators, links, bushings, fasteners, tires, and alignment hardware; no unverified internal product link is included.
FAQ
What is the ASTLS-22-293?It is lowering spring kit for the 2022-2026 BMW M240i G42 rear-wheel-drive coupe.
What application must be confirmed before ordering?Confirm G42 coupe, M240i, rear-wheel drive, production date from 08/2021 onward, and original suspension package. Not suitable for xDrive or other four-wheel-drive cars.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Inspect every retained damper, mount, bearing, isolator, bump stop, link, bushing, fastener, tire, and alignment component while the suspension is apart.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Confirm AST Suspension ASTLS-22-293, the application, and every listed restriction before installation.
- Measure the original ride height and inspect the complete suspension, steering, tires, and wheel clearance.
- Support the vehicle at approved points and remove the original springs using the current factory and AST procedures with proper spring-compression equipment.
- Install each AST spring in its specified axle and orientation with compatible serviceable mounts, isolators, and bump stops.
- Torque all suspension fasteners at the manufacturer-specified suspension position and verify full-travel hose, axle, tire, wheel, and body clearance.
- Complete a professional four-wheel alignment, road-check the installation, and remeasure ride height after the springs settle.




