View vehicle applications
Fitment notes and restrictions
Description
Lower the front of a rear-air BMW X5 while retaining diagnostic rear adjustment
AST Suspension ASTLS-17-031 is a progressive lowering spring set for supported BMW X5 xDrive models with rear air suspension. The exact drop, body style, drive layout, retained suspension equipment, and restrictions below must be confirmed before installation.
Key Features
- AST Suspension ASTLS-17-031 is matched to the verified application and configuration
- Progressive spring design for the stated application
- Cold-coiled on Wafios machinery
- Direct replacement for the supported original spring locations
- Manufacturer-specified ride-height change: 35 mm front; rear adjusted through the vehicle diagnostic system
- Lifetime manufacturer warranty against spring breakage under current terms
- Professional alignment required after installation
Application details and restrictions
| Years | Make | Model | Requirements and Restrictions |
|---|---|---|---|
| 12/2013-11/2018 | BMW | X5 xDrive 35i / 25d / 30d / 40d | F15 SUV with rear air suspension; not suitable for 2WD; set contains two front springs only |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | ASTLS-17-031 |
| Spring Design | Progressive |
| Manufacturing | Cold-coiled on Wafios machinery |
| Front Lowering | 35 mm |
| Rear Lowering | Adjusted through vehicle diagnostic system; no rear springs supplied |
| Warranty | Lifetime against spring breakage under current AST terms |
| Chassis | F15 SUV |
| Required Rear Suspension | Air suspension |
| Drive Restriction | xDrive only; not suitable for 2WD |
What's Included
- One exact AST Suspension ASTLS-17-031 two front lowering springs
- Rear springs are not supplied; rear height is adjusted through the vehicle diagnostic system
- Dampers, mounts, diagnostic service, tools, and unrelated suspension parts are not included
About AST Suspension
AST Suspension engineers and manufactures dampers, coilovers, lowering springs, and motorsport suspension hardware in the Netherlands. Exact vehicle configuration, axle layout, retained factory equipment, ride-height change, and alignment requirements must be confirmed before installation.
Related Parts
- Inspect retained dampers, mounts, bump stops, isolators, links, bushings, fasteners, tires, and alignment hardware; no unverified internal product link is included.
FAQ
What is the ASTLS-17-031?It is lowering spring kit for the listed BMW X5 F15 xDrive applications with rear air suspension.
What application must be confirmed before ordering?Confirm F15 X5, xDrive, supported 35i/25d/30d/40d configuration, rear air suspension, and 12/2013-11/2018 production range. Not suitable for 2WD.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Inspect every retained damper, mount, bearing, isolator, bump stop, link, bushing, fastener, tire, and alignment component while the suspension is apart.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Confirm AST Suspension ASTLS-17-031, the application, and every listed restriction before installation.
- Measure the original ride height and inspect the complete suspension, steering, tires, and wheel clearance.
- Support the vehicle at approved points and remove the original springs using the current factory and AST procedures with proper spring-compression equipment.
- Install each AST spring in its specified axle and orientation with compatible serviceable mounts, isolators, and bump stops.
- Torque all suspension fasteners at the manufacturer-specified suspension position and verify full-travel hose, axle, tire, wheel, and body clearance.
- Complete a professional four-wheel alignment, road-check the installation, and remeasure ride height after the springs settle.




