View vehicle applications
Fitment notes and restrictions
Description
Convert an existing AWE Touring catback to Track specification
AWE 3820-11330 replaces the sound-control section of the supported AWE Touring Edition system, changing it to the more aggressive Track Edition configuration without replacing the complete catback. It is not a stand-alone exhaust system.
Key Features
- Converts the compatible AWE Touring Edition to Track Edition
- Retains the remainder of the existing AWE catback
- T304L stainless-steel construction
- Application-specific fit for supported G2X 330i and 430i systems
- 50-state emissions legal because it does not alter emissions equipment
- No ECU tune required
- AWE Fitment Guarantee and No CEL Guarantee
- Exact AWE application is identified by manufacturer part number 3820-11330
Application details and restrictions
| Years / Scope | Make | Model / Component | Requirement |
|---|---|---|---|
| 2025-2026 | BMW | 330i Sedan | Factory rear-bumper outlet layout |
| 2025-2026 | BMW | 430i Coupe | Factory rear-bumper outlet layout |
AWE identifies this exhaust suite for 2025 and newer G2X BMW 330i and 430i applications and states that it is engineered for sedan and coupe body styles. Confirm the exact vehicle, body style, and rear-bumper outlet layout before installation.
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 3820-11330 |
| Product Type | Touring-to-Track exhaust conversion section |
| Material | T304L stainless steel |
| Required Existing System | Compatible AWE Touring Edition catback for 2025+ BMW G2X 330i/430i |
| Stand-Alone Exhaust | No |
| Emissions | 50-state legal; does not alter emissions-control or monitoring devices |
| Tuning | No ECU tune required |
What's Included
- AWE 3820-11330: One AWE Touring-to-Track conversion exhaust section
- Application-specific clamps and hardware identified by AWE
- Complete catback system and exhaust tips are not included
About AWE
AWE develops performance hardware and software for Audi, Volkswagen, Porsche, and related platforms. Its application-specific components are engineered around verified vehicle, engine, transmission, and emissions requirements rather than model name alone.
Related Parts
- No related store product is linked because supporting components must be verified for the exact vehicle, engine, transmission, and current AWE configuration.
FAQ
What is the 3820-11330?It is touring-to-track conversion kit for the exact application and restrictions shown above.
What does this kit convert?It converts the compatible AWE Touring Edition catback for the supported BMW application to Track Edition configuration.
Is this a complete catback exhaust?No. It is a conversion section for an existing compatible AWE Touring system.
Will it work with the factory exhaust?AWE identifies it for use with the corresponding AWE Touring Edition system, not as a factory-exhaust add-on.
Are exhaust tips included?No. The existing compatible catback and its tips are retained.
What material is used?AWE uses T304L stainless steel for the conversion section.
Is ECU tuning required?No. AWE states that no ECU tune is required.
Does it alter emissions equipment?No. AWE states that the conversion does not tamper with emissions-control or monitoring devices.
Installation Instructions
- Confirm the vehicle and existing exhaust use the compatible AWE Touring Edition catback, then verify the AWE 3820-11330 part label.
- Allow the exhaust to cool fully, raise the vehicle at approved lift points, and review AWE's current conversion instructions.
- Support the exhaust and remove only the Touring section identified by AWE without disturbing unrelated emissions equipment.
- Install the Track conversion section with the supplied clamps and hardware, leaving joints loose enough for alignment.
- Verify underbody, driveline, bumper, and heat-shield clearance, then tighten all joints to AWE's current values.
- Start the vehicle in a ventilated area, inspect for leaks or contact, and recheck the installation after the first heat cycle.
