View vehicle applications
Fitment notes and restrictions
Description
Expose the 2.5T induction note without sacrificing the engineered inlet path
AWE Tuning 2660-15148 is the open S-FLO carbon intake for the supported 8V and 8Y Audi RS3 and Mk3 TT RS 2.5T applications. Its 4.5-inch carbon inlet, oil-less filter, and application-specific mounting hardware replace the restrictive factory inlet path while retaining the sensor and engine-bay clearances designed by AWE.
Key Features
- AWE Tuning 2660-15148 is matched to the verified application and configuration
- Open-filter S-FLO configuration for stronger induction sound
- 4.5-inch carbon-fiber inlet path
- Oil-less performance filter
- Application-specific bracket, couplers, and clamps
- No ECU tune required when installed and used as intended
- AWE fitment and no-check-engine-light guarantees under current terms
- 49-state legal and not approved for sale or street use in California
Application details and restrictions
| Years | Make | Model | Engine / Requirements |
|---|---|---|---|
| 2017-2020, 2022-2026 | Audi | RS3 | 2.5T; confirm 8V or 8Y application and original intake configuration. |
| 2018-2022 | Audi | TT RS Quattro | 2.5T Mk3 application; confirm original intake configuration. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 2660-15148 |
| Product Type | Open S-FLO carbon-fiber intake |
| Inlet Diameter | 4.5 in |
| Filter | Oil-less performance filter |
| Construction | Carbon-fiber inlet with application-specific aluminum mounting hardware |
| ECU Tune | Not required when installed and used as intended |
| Emissions Status | 49-state legal; not approved for sale or street use in California |
| UPC | 850092394125 |
What's Included
- One exact AWE Tuning 2660-15148 Open carbon-fiber inlet assembly
- Oil-less filter
- Application-specific mounting bracket
- Couplers, clamps, and supplied installation hardware
About AWE Tuning
AWE develops application-specific intake and exhaust systems around measured airflow, sound, packaging, and installation requirements. Its fitment and no-check-engine-light guarantees apply under AWE's current terms when the product is installed correctly and used in the intended configuration.
Related Parts
- AWE's closed S-FLO configuration adds the matching carbon airbox enclosure for buyers who prefer a more contained inlet layout; no unverified internal product link is included.
FAQ
What is the 2660-15148?It is open carbon cold air intake for the listed Audi RS3 and TT RS 2.5T applications.
What application must be confirmed before ordering?Confirm the exact RS3 or TT RS model year, 2.5T engine, platform, factory intake layout, and California-use restriction before ordering.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Yes. Inspect the filter, carbon inlet, couplers, clamps, sensor connection, bracket, and surrounding clearances at each normal service interval.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Confirm AWE Tuning 2660-15148, the application, and every listed restriction before installation.
- Allow the engine to cool and protect the turbo inlet and sensor openings from debris.
- Remove the factory inlet components only as directed by AWE and retain required original hardware.
- Install the bracket, carbon inlet, couplers, filter, and sensor connection without loading the wiring or hoses.
- Verify hood, engine-movement, heat, and wiring clearance, then tighten every clamp and fastener.
- Start the engine, inspect for leaks or warning lights, and recheck the assembly after the first heat cycle.




