View vehicle applications
Fitment notes and restrictions
Description
Uncork the GR Corolla with the loudest straight-through AWE configuration
AWE Tuning 3020-52472 is the non-resonated Track Edition cat-back for the supported Toyota GR Corolla. Its 3-inch T304L stainless path divides through a tailored tri-merge into the factory-style three-tip layout, trading the Touring system's 180 Technology for maximum volume and reduced weight.
Key Features
- AWE Tuning 3020-52472 is matched to the verified application and configuration
- Non-resonated Track Edition configuration without 180 Technology
- 3-inch CNC mandrel-bent T304L stainless-steel tubing with 0.065-inch wall
- Single 3-inch inlet transitioning to three 2.5-inch tailpipes
- One 4.5 x 8-inch oval center tip and two 5-inch round outer tips
- Double-wall slash-cut chrome silver tips with AWE logos
- Direct bolt-on design with no ECU tune required
- AWE reports maximum gains of 3 wheel horsepower and 1 lb-ft
- Track Edition may produce significant mid-range drone and cannot be returned for sound preference
Application details and restrictions
| Years | Make | Model | Verified Trims / Requirements |
|---|---|---|---|
| 2023-2026 | Toyota | GR Corolla | Circuit Edition, Core, Morizo Edition, Premium, Premium Plus, and 2026 Base only where listed by year in the verified fitment tags. 1.6L AWD manual application. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 3020-52472 |
| Product Type | Track Edition cat-back exhaust |
| Material | T304L stainless steel |
| Primary Tube Diameter | 3 in |
| Tailpipe Diameter | Three 2.5 in outlets |
| Tip Configuration | One 4.5 x 8 in oval center tip and two 5 in round outer tips |
| Tip Finish | Chrome silver |
| Resonator / 180 Technology | Not included in Track Edition |
| ECU Tune | Not required |
| UPC | 850063923088 |
| Warranty | AWE lifetime exhaust warranty and one-year tip warranty under current terms |
What's Included
- One exact AWE Tuning 3020-52472 Track Edition 3-inch T304L cat-back exhaust assembly
- One oval center chrome silver tip
- Two round outer chrome silver tips
- Clamps, hangers, and direct-fit installation hardware supplied by AWE
About AWE Tuning
AWE develops application-specific intake and exhaust systems around measured airflow, sound, packaging, and installation requirements. Its fitment and no-check-engine-light guarantees apply under AWE's current terms when the product is installed correctly and used in the intended configuration.
Related Parts
- AWE Touring Edition and Track-to-Touring conversion components are separate configurations for buyers who need additional frequency control; verify the exact companion part before ordering and use no unverified internal link.
FAQ
What is the 3020-52472?It is track edition cat-back exhaust for the exact 2023-2026 Toyota GR Corolla trim and year combinations listed above.
What application must be confirmed before ordering?Confirm the exact GR Corolla year, trim, 1.6L AWD manual configuration, desired Track Edition sound level, and local sound regulations before ordering.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Yes. Inspect clamps, hangers, tip alignment, underbody clearance, and every joint after the first heat cycles and at normal service intervals.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Confirm AWE Tuning 3020-52472, the application, and every listed restriction before installation.
- Allow the exhaust to cool completely, support the vehicle correctly, and review AWE's current installation guide.
- Support the factory exhaust, disconnect the required joints and hangers, and remove it without damaging surrounding components.
- Assemble the AWE sections loosely from front to rear, keeping the tri-merge, hangers, and three tips correctly oriented.
- Set underbody and bumper clearance, center the oval and round tips, then tighten the clamps in the documented sequence.
- Start the engine, inspect for leaks or contact, heat-cycle the system, and recheck alignment and clamp torque.
California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.




