-5%
AWE 2660-15150 closed carbon intake side view
AWE closed S-FLO intake installed on Audi 2.5T
AWE 2660-15150 carbon airbox front angle
AWE closed carbon intake installed in an Audi RS3
AWE 2660-15150 closed intake components
AWE S-FLO carbon inlet and filter side view
AWE S-FLO carbon inlet and filter front view
Click to zoom in
View vehicle applications

Description

Enclose the high-flow inlet in a complete carbon airbox assembly

AWE Tuning 2660-15150 combines the supported Audi 2.5T S-FLO inlet and oil-less filter with a formed carbon-fiber enclosure. The closed configuration is designed for the listed 8V and 8Y RS3 and Mk3 TT RS applications while retaining the 4.5-inch inlet path, application-specific mounting points, and no-tune installation strategy.

Key Features

  • AWE Tuning 2660-15150 is matched to the verified application and configuration
  • Closed carbon-fiber airbox and inlet configuration
  • 4.5-inch carbon-fiber inlet path
  • Oil-less performance filter
  • Application-specific bracket, couplers, clamps, and enclosure hardware
  • No ECU tune required when installed and used as intended
  • AWE fitment and no-check-engine-light guarantees under current terms
  • 49-state legal and not approved for sale or street use in California

Application details and restrictions

Years Make Model Engine / Requirements
2017-2020, 2022-2026 Audi RS3 2.5T; confirm 8V or 8Y application and original intake configuration.
2018-2022 Audi TT RS Quattro 2.5T Mk3 application; confirm original intake configuration.

Specifications

Detail Value
Manufacturer Part Number 2660-15150
Product Type Closed S-FLO carbon-fiber intake
Inlet Diameter 4.5 in
Filter Oil-less performance filter
Enclosure Formed carbon-fiber airbox
ECU Tune Not required when installed and used as intended
Emissions Status 49-state legal; not approved for sale or street use in California
UPC 850092394132

What's Included

  • One exact AWE Tuning 2660-15150 Closed carbon-fiber airbox and inlet assembly
  • Oil-less filter
  • Application-specific mounting bracket
  • Couplers, clamps, and supplied installation hardware

About AWE Tuning

AWE develops application-specific intake and exhaust systems around measured airflow, sound, packaging, and installation requirements. Its fitment and no-check-engine-light guarantees apply under AWE's current terms when the product is installed correctly and used in the intended configuration.

Related Parts

  • AWE's open S-FLO configuration uses the same application family without the full carbon airbox enclosure; no unverified internal product link is included.

FAQ

What is the 2660-15150?

It is closed carbon cold air intake for the listed Audi RS3 and TT RS 2.5T applications.

What application must be confirmed before ordering?

Confirm the exact RS3 or TT RS model year, 2.5T engine, platform, factory intake layout, and California-use restriction before ordering.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Yes. Inspect the filter, carbon enclosure, inlet, couplers, clamps, sensor connection, bracket, and surrounding clearances at each normal service interval.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm AWE Tuning 2660-15150, the application, and every listed restriction before installation.
  2. Allow the engine to cool and protect the turbo inlet and sensor openings from debris.
  3. Remove the factory inlet components only as directed by AWE and retain required original hardware.
  4. Install the bracket, inlet, filter, carbon enclosure, couplers, and sensor connection without loading the wiring or hoses.
  5. Verify hood, engine-movement, heat, and wiring clearance, then tighten every clamp and fastener.
  6. Start the engine, inspect for leaks or warning lights, and recheck the assembly after the first heat cycle.

AWE S-FLO Closed Carbon Intake for 2017-2026 Audi RS3 and 2018-2022 TT RS

AWE Tuning
AWE2660-15150
850092394132
Cold Air Intakes
2 Units In Stock
$ 1,594.74 $ 1,515.00
$ 1,515.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×