View vehicle applications
Fitment notes and restrictions
Description
Place an auxiliary light on a 1.75-inch cage tube without welding
Baja Designs 617508 is a universal A-pillar light mount sized for a 1.75-inch roll-cage tube. Its black anodized clamp and 10 mm light-mounting hole provide a compact attachment point when tube diameter, light stud, wiring, and clearance are confirmed.
Key Features
- Clamp-on mount for a 1.75-inch round tube
- Black anodized finish
- 10 mm light mounting hole
- Stainless-steel mounting hardware
- Universal dimension-based application
- No year-make-model fitment applies
Fitment
| Application Type | Verified Requirements |
|---|---|
| Universal / dimension based | 1.75-inch round roll-cage tube, compatible 10 mm light stud, sufficient light and wiring clearance, and a structurally suitable mounting location. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 617508 |
| Product Type | A-pillar roll-cage light mount |
| Tube Diameter | 1.75 in |
| Light Mounting Hole | 10 mm |
| Finish | Black anodized |
| Hardware | Stainless steel |
| Quantity | One mount |
What's Included
- One black A-pillar tube clamp
- Stainless-steel clamp hardware shown with the exact mount
About Baja Designs
Baja Designs develops auxiliary lighting and vehicle-specific mounting hardware for off-road and performance use. Universal clamps must be selected by exact tube diameter, stud size, load, wiring route, and safe operating clearance.
Related Parts
- No internal light is linked because light weight, stud size, beam pattern, wiring harness, electrical load, and physical clearance must be verified independently.
FAQ
What is the 617508?It is one clamp-on auxiliary-light mount for a 1.75-inch round roll-cage tube.
Does it have vehicle-specific fitment?No. This is a universal dimension-based mount.
What tube diameter does it require?It is sized for a 1.75-inch round tube.
What size is the light mounting hole?The verified light mounting hole is 10 mm.
Is welding required?No. The mount uses a clamp and supplied hardware.
Is a light included?No. The mount and its hardware are included; the light and wiring are selected separately.
Can it be mounted anywhere on a cage?No. The location must be structurally suitable and clear of occupants, glass, bodywork, moving parts, and the required field of view.
What should be checked after installation?Confirm clamp torque, light aim, wiring protection, full vehicle clearance, and that the mount cannot rotate under vibration.
Installation Instructions
- Measure the tube to confirm a 1.75-inch round outside diameter and inspect the mounting area for damage.
- Confirm the light uses a compatible 10 mm mounting stud and that the combined load is suitable for the tube location.
- Plan a protected wiring route with clearance from glass, bodywork, occupants, steering, suspension, and heat.
- Position the clamp without trapping wiring or damaging the cage finish, then install the stainless hardware evenly.
- Mount and aim the light according to its instructions and torque all hardware to the current manufacturer specification.
- Cycle nearby moving components, verify visibility and clearance, and recheck clamp torque after the first drive.
