View vehicle applications
Fitment notes and restrictions
Description
Power one Squadron 2.0 light and control its backlight
Baja Designs 60-0058 is a universal single-light wiring harness for a compatible Squadron 2.0 Sport or Pro pod. It provides a direct fused battery connection, a 4-pin Deutsch-style light connector and a three-position switch for main-light and backlight control, with a 150W maximum connected load.
Key Features
- Controls one compatible Squadron 2.0 Sport or Pro light
- 4-pin Deutsch-style light connector
- Three-position switch supports main-light and backlight operation
- Direct battery connection with relay and circuit protection
- 150W maximum connected load
Fitment
| Application | Requirements |
|---|---|
| Squadron 2.0 Sport or Pro single-light installation | Verify one compatible 4-pin light, a 12V vehicle electrical system, fused battery connection, switch mounting, safe wire routing and a total load no greater than 150W. This is not a year-make-model harness. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer part number | 60-0058 |
| Light capacity | One Squadron 2.0 light |
| Connector | 4-pin Deutsch-style |
| Control | Three-position switch |
| Maximum connected load | 150W |
| Power source | Direct fused battery connection |
What's Included
- Single-light wiring harness
- Three-position switch
- Relay, fuse protection and battery ring terminals shown with the harness
About Baja Designs
Baja Designs engineers lighting and wiring components as matched systems. Using the correct connector, circuit protection and switching arrangement preserves intended light and backlight control while supporting serviceable installations.
Related Parts
- Compatible Squadron 2.0 Sport or Pro light pod is required and sold separately.
- Mounting brackets and vehicle-specific adapters are not included unless supplied with the light.
- Use only compatible 4-pin extensions or splitters within the verified electrical limit.
FAQ
What is the 60-0058?It is a universal fused harness for powering and controlling one compatible Squadron 2.0 light and its backlight.
Does it fit a specific vehicle?No. Installation depends on available battery access, switch mounting, wire routing and a suitable light mounting location.
Which lights use this harness?It is intended for one Baja Designs Squadron 2.0 Sport or Pro light with the matching 4-pin connector.
Does the harness control the backlight?Yes. The three-position switch supports the compatible light’s main output and backlight functions.
What is the maximum load?The connected light load must not exceed 150W.
Is the light included?No. This product is the wiring harness and related control hardware.
Can wiring be routed near exhaust or moving parts?No. Keep the harness away from heat, sharp edges, steering, suspension and other moving components.
What should be checked before ordering?Confirm the light connector, electrical load, battery access, switch location and complete routing path.
Installation Instructions
- Disconnect battery power and confirm the complete harness route.
- Mount the switch where it can be operated safely without interfering with vehicle controls.
- Secure the relay and route the light lead away from heat, sharp edges and moving components.
- Connect the 4-pin plug to the compatible light, then make the fused battery connections according to the current Baja Designs instruction sheet.
- Reconnect power, test main-light and backlight operation, and secure all wiring.
California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.




