View vehicle applications
Fitment notes and restrictions
Description
Choose the right wheel by measurement before the tire is mounted
TS-C209089P1202 is one TS-C Classic wheel with the exact size, bolt pattern, offset, center bore, and finish listed below. It is a specification-selected part, so compatibility depends on the complete wheel and vehicle measurements rather than a broad year-make-model claim.
Key Features
- 20x9-inch wheel
- 6x135 bolt pattern
- ET12 offset
- 87.1 mm center bore
- Satin Bronze finish
- 2,500-pound load rating
- One-piece counter-pressure cast construction with a flow-formed rim and barrel
- Back-milled spoke areas and FEM-guided weight optimization
- Sold individually
Fitment
| Application Type | Requirement | Verified Value | Buying Note |
|---|---|---|---|
| Universal / specification selected | Wheel size | 20x9 inches | Confirm tire size and all body, brake, and suspension clearances |
| Universal / specification selected | Bolt pattern and bore | 6x135 / 87.1 mm | Confirm lug count, pitch circle, hub diameter, and centering method |
| Universal / specification selected | Offset | ET12 | Confirm inner and outer position before tire mounting |
| No year-make-model mapping | Vehicle compatibility | Not assigned | Test-fit the bare wheel and verify load capacity and hardware |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | TS-C209089P1202 |
| Series | TS-C Classic |
| Diameter | 20 inches |
| Width | 9 inches |
| Bolt Pattern | 6x135 |
| Offset | ET12 |
| Center Bore | 87.1 mm |
| Finish | Satin Bronze |
| Load Rating | 2,500 pounds |
| Construction | One-piece counter-pressure cast with flow-formed rim and barrel |
| Lug Seat | Conical |
What's Included
- One TS-C Classic wheel in Satin Bronze
- BBS center cap shown with the exact product image
- Tire, TPMS sensor, hub ring, lug hardware, mounting, and balancing are not included unless separately supplied
About BBS
BBS applies motorsport-derived engineering to road and truck wheels. The TS family combines one-piece counter-pressure casting with a flow-formed rim and barrel, back-milled spoke areas, and load-focused construction for specification-matched installations.
Related Parts
- Vehicle-specific conical-seat lug nuts or bolts
- Hub-centric rings matched to the vehicle hub and wheel bore when required
- Compatible TPMS sensors and valve stems
- Tires selected for the wheel width, load, clearance, and intended use
FAQ
What is the TS-C209089P1202?It is one TS-C Classic wheel in the 20x9 Satin Bronze configuration shown in this listing.
Is this listing for one wheel or a set?The listed price and package quantity are for one wheel. Order the required quantity for the vehicle and installation plan.
Does the bolt pattern alone guarantee fitment?No. Diameter, width, offset, center bore, brake clearance, suspension clearance, load capacity, lug seat, and tire size must also be verified.
Is a tire included?No. The listing is for the wheel only; tire, mounting, balancing, and TPMS service are not included.
Is a TPMS sensor included?No TPMS sensor is represented as included. Select a sensor and valve compatible with the vehicle and wheel.
Are lug nuts or bolts included?No lug hardware is represented as included. Use the correct conical-seat hardware, thread specification, length, and torque procedure.
Is a hub-centric ring required?A ring may be required when the vehicle hub is smaller than the 87.1 mm center bore. Verify the vehicle hub diameter before ordering.
What should be checked before mounting a tire?Test-fit the bare wheel and verify hub seating, brake and suspension clearance, fender clearance, hardware engagement, and intended tire size.
Installation Instructions
- Confirm the carton label matches the ordered wheel before mounting a tire.
- Compare diameter, width, bolt pattern, offset, center bore, load rating, and lug-seat type with the vehicle requirements.
- Test-fit the bare wheel and verify hub seating, brake clearance, suspension clearance, and fender clearance through the steering and suspension range.
- Select the correct tire, TPMS sensor, valve, hub ring, and conical-seat hardware for the verified application.
- Mount and balance the tire using wheel-safe equipment and the tire manufacturer's procedures.
- Install the wheel on clean mating surfaces and hand-start every fastener.
- Torque the fasteners in the vehicle manufacturer's sequence and specification.
- Recheck torque after the initial service interval and inspect for vibration, contact, or hardware movement.
California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.




