View vehicle applications
Fitment notes and restrictions
Description
Match shorter injectors to a taller fuel-rail configuration
BLOX Racing BXEF-AT-14S-4 is a set of four billet-aluminum adapter tops for 14mm-bore fuel injectors. Each adapter adds 1/2 inch of installed height and uses a Viton O-ring and retaining clip; injector, rail, electrical, flow, and pressure compatibility must be verified separately.
Key Features
- Four precision-machined billet-aluminum adapter tops
- 14mm injector bore interface
- Adds 1/2 inch of injector height
- Viton sealing O-rings
- Retaining clips included
- Not CARB legal and not for sale or use in California on pollution-controlled vehicles
Application details and restrictions
| Selection Basis | Verified Requirement |
|---|---|
| Injector interface | Compatible 14mm bore and body geometry |
| Added height | 1/2 inch |
| System checks | Confirm fuel rail, manifold, injector, O-ring, clip, pressure, electrical connector, and tune requirements |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | BXEF-AT-14S-4 |
| Bore | 14 mm |
| Height Added | 1/2 in |
| Material | Billet aluminum |
| Seal Material | Viton |
| Quantity | Set of four |
| CARB Status | Not CARB legal; not for California pollution-controlled vehicle use |
What's Included
- Four 14mm injector adapter tops
- Four Viton O-rings and retaining clips as shown for the exact set
- Fuel injectors, rail, manifold, wiring, tuning, and unrelated seals are not included
About BLOX Racing
BLOX Racing produces fuel-system and engine components for modified sport-compact applications. Injector adapters must be selected by exact physical dimensions and complete system compatibility.
Related Parts
- Select injectors, rails, clips, seals, and tuning only after confirming the exact system dimensions and fuel requirements; no unverified internal link is included.
FAQ
What is the BXEF-AT-14S-4?It is fuel injector height adapter set for compatible 14mm injectors that require a 1/2-inch height extension.
What application must be confirmed before ordering?Confirm injector diameter, body and tip geometry, required height, O-ring size, clip retention, rail and manifold seating, pressure rating, electrical connector, flow rate, fuel type, and calibration.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Inspect every injector, rail bore, manifold seat, O-ring, retaining clip, hose, fitting, and pressure-control component before assembly.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Depressurize the fuel system using approved service information and disconnect the battery.
- Confirm the exact injector and 1/2-inch height requirement before opening the package.
- Inspect and lubricate compatible Viton O-rings only with a manufacturer-approved lubricant.
- Install each adapter and retaining clip without cutting or twisting the seals.
- Seat the injectors and rail squarely, torque hardware to the applicable specification, and reconnect all lines and wiring.
- Prime and pressure-test the system for leaks before starting the engine, then verify fueling and calibration.




