-10%
Click to zoom in
This Borla axle-back exhaust system is built for the verified 2014-2024 Mini Cooper S application listed below. Select it by exact manufacturer part number 11915CB and confirm the full engine, drivetrain, body, wheelbase, factory-exhaust, and Borla application notes before ordering.
Key Features
- Exact Borla manufacturer part number for reliable identification
- Purpose-built axle-back exhaust system configuration
- Dimensions, sound profile, exit layout, finish, and included hardware remain part-number specific
- Exhaust clearance, hanger alignment, sealing surfaces, and tip position must be checked during installation
Fitment
| Years | Make | Model | Application |
|---|---|---|---|
| 2014-2024 | Mini | Cooper | S |
Specifications
| Manufacturer | Borla |
|---|---|
| Manufacturer Part Number | 11915CB |
| Product Type | Axle Back |
| Fitment Type | Vehicle specific, verify the complete application |
What's Included
One new Borla product identified by manufacturer part number 11915CB. Clamps, hangers, gaskets, tips, pipes, tools, and companion parts are included only when expressly listed for this exact part number.
About Borla
Borla develops stainless-steel exhaust systems, mufflers, tips, pipes, and related components for vehicle-specific and universal performance applications. Product selection remains exact-application and exact-part-number specific.
Related Borla Products
- Borla 14-15 Mini Cooper S F56 2.0L Turbo AT/MT FWD 2DR 2.5in S-Type Rear Section Exhaust 4in Tips
- Borla 14-16 Lexus IS 250/350 2.5L/3.5L Automatic/Manual Trans RWD 4 door S-Type Axle back Exhaust
- Borla 14-24 Mini Cooper S (F55) S-Type Axle-Back Exhaust System
Browse the Borla collection for related exhaust systems and components.
Frequently Asked Questions
Will this Borla part fit my 2014-2024 Mini Cooper S?
That application is listed, but confirm the engine, drivetrain, body or cab style, wheelbase, factory exhaust layout, tip opening, and every Borla application note before ordering.
Will this change require an engine tune?
A cat-back, axle-back, tip, muffler, or post-catalyst component usually does not require tuning, but confirm the exact application, emissions configuration, oxygen-sensor locations, and local requirements before installation.
What should I inspect before installation?
Check the shipping carton and components against the exact part number, then inspect clamps, hangers, gaskets, mating flanges, clearances, tip alignment, and required reused factory hardware before removing the original exhaust.
Installation Instructions
Follow the current Borla instructions and vehicle service information for this exact part number. Let the exhaust cool, support the vehicle safely, compare all parts before removal, protect sensors and wiring, use the specified clamps and torque values, align all joints and tips without preload, confirm body and suspension clearance, check for leaks, and retorque after the first heat cycles. Professional installation is recommended.
Axle Back
Axle back exhaust systems for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop single and dual exit axle back systems, valved axle back exhausts, stainless steel and titanium tip options, black chrome and carbon fiber tips, and vehicle specific axle back kits for Corvette, Mustang, WRX, Miata, Corolla, Bronco, and Explorer platforms from MBRP, Borla, MagnaFlow, AWE Tuning, Corsa, and aFe. Every axle back system is filterable by year, make, model, trim, engine, and drivetrain so the correct diameter, tip style, and mounting hardware ships the first time. Black Ops Auto Works carries 611 axle back SKUs across single exit, dual exit, and valved categories. What This Collection Covers Axle back exhaust replaces everything from the rear axle back, typically the muffler, resonator if equipped, and exhaust tips, without touching the catalytic converter, mid pipe, or headers. It is the most common entry point into aftermarket exhaust because it focuse...
View Axle Back Products
Borla
Shop Borla exhaust systems by exact vehicle fitment and manufacturer part number, including ATAK, S-Type and Touring cat-back and axle-back systems, T-304 stainless-steel mufflers, exhaust tips, X-pipes, mid-pipes, resonators, clamps and universal components. Use the Year/Make/Model selector or search the Borla part number to find the correct exhaust for your car, truck or SUV. Every Borla product in this collection qualifies for free ground shipping within the contiguous United States while advertised prices remain MAP compliant. Borla Performance Exhaust Systems Borla engineers vehicle-specific exhaust systems for sound, flow and precise fitment. Many Borla cat-back and axle-back systems use T-304 austenitic stainless steel, mandrel-bent tubing and application-specific muffler technology. Borla backs qualifying products with its Million-Mile Warranty. Construction, sound, tip finish, included hardware, warranty eligibility and emissions notes vary by part number, so verify the exa...
View Borla Products
Exhaust Systems
Shop performance exhaust systems, cat-backs, axle-backs, headers, mufflers, and exhaust tips at Black Ops Auto Works. Compare options from Borla, CORSA, Solo Performance, AWE, MagnaFlow, MBRP, Kooks, Akrapovic, Invidia, and other brands. Find complete systems and individual components for muscle cars, performance SUVs, trucks, imports, and European vehicles. Cat-Back and Axle-Back Exhaust Systems Choose the exhaust section that matches your project. Cat-back systems generally replace the exhaust downstream of the catalytic converter, while axle-back systems replace the rear section. Exact connection points and package contents vary by vehicle. Compare muffler design, pipe diameter, exit location, tip configuration, and compatibility with existing exhaust components. Exhaust for HEMI, SRT, Trackhawk, and Hellcat Vehicles This collection includes exhaust options for selected Jeep Grand Cherokee SRT and Trackhawk, Dodge Durango SRT and Hellcat, Dodge Charger, Chrysler 300, and Ram appl...
View Exhaust Systems Products