Boundary VQ35DE Stage 2 MartenWear oil pump
Click to zoom in
View vehicle applications

Description

Build stable oil flow into a high-RPM VQ35DE.

Boundary VQ-S2-DE-M is a complete Stage 2 oil-pump assembly built on a Nissan housing with a matched, mirror-finished billet steel gear set and MartenWear treatment. Boundary states approximately 30 percent more flow than the OEM or Hi-Rev pump, with the standard assembled-pump back-plate configuration for the selected configuration.

Key Features

  • Exact Boundary part number VQ-S2-DE-M
  • Designed for the Nissan/Infiniti VQ35DE 3.5L engine family
  • Mirror-finished billet steel inner and outer gear set
  • MartenWear dual-stage heat treatment for wear resistance on gear surfaces
  • Approximately 30 percent more flow than the OEM or Hi-Rev pump, according to Boundary
  • Complete assembled pump without the optional billet-back-plate upgrade
  • Ultrasonic cleaning, hand inspection, deburring, blueprinting and specification sheet
  • Stainless Torx fasteners, threadlocker, anaerobic sealant and assembly lubricant applied during assembly

Fitment

Years Make Model / Requirement
2002-2018 Nissan Altima with VQ35DE 3.5L only; mixed-engine model, so verify engine code
2002 and later Nissan Maxima with VQ35DE 3.5L
2002-2006 Nissan 350Z with VQ35DE 3.5L
2001-2007 manufacturer grouping Infiniti G35, M35, FX35 and I35 applications with VQ35DE only; verify exact year, model and engine

Do not use this application list for VQ35HR, VQ37VHR, VQ40DE or 2.5L Altima engines. Confirm the stamped engine code, oil-pump housing and crank interface before purchase.

Specifications

Detail Value
Manufacturer part number VQ-S2-DE-M
Product type Stage 2 high-flow engine oil-pump assembly
Engine family Nissan/Infiniti VQ35DE 3.5L
Housing Special Nissan OEM housing
Gear construction Matched billet steel inner and outer gears
Gear treatment MartenWear dual-stage heat treatment
Back plate Standard assembled-pump configuration; optional billet back plate is not included
Flow Approximately 30 percent more than OEM or Hi-Rev pump
Relief-pressure options 1 shim +10 PSI; 2 shims +20 PSI; 3 shims +30 PSI
Product weight 3 lb
Package dimensions 10 x 6 x 3 in
Warranty Boundary lifetime warranty

What's Included

  • One assembled Boundary VQ-S2-DE-M VQ35DE oil pump
  • Installed standard back-plate configuration
  • Blueprint specification sheet

About Boundary

Boundary Racing Pumps machines and blueprints performance oil-pump components in the United States. Its assembled pumps are cleaned, inspected, deburred, sealed and lubricated before shipment, then documented with a build specification sheet.

Related Parts

  • Boundary VQ35DE relief-pressure shim kit for builder-selected pressure changes
  • VQ35DE timing-cover gaskets and front crank seal selected for the exact engine and service procedure
  • Engine oil, filter and assembly supplies specified by the engine builder

FAQ

What is the VQ-S2-DE-M?

It is a Boundary Stage 2 high-flow assembled oil pump for verified VQ35DE 3.5L applications, with MartenWear-treated billet gears.

Does this fit every Nissan or Infiniti 3.5L engine?

No. It is for the VQ35DE engine family and must not be selected for VQ35HR, VQ37VHR or other engine variants without separate manufacturer confirmation.

How much more oil flow does it provide?

Boundary states approximately 30 percent more flow than the OEM or Hi-Rev pump.

What is MartenWear treatment?

It is Boundary's dual-stage heat treatment applied to billet gear wear surfaces to improve hardness and resistance to debris-related wear.

Is the pump ready to install?

It is supplied assembled and blueprinted, but installation still requires professional engine service, correct gaskets and seals, pressure-setting confirmation and oil-system priming.

Which relief-pressure setting should I choose?

The correct shim setting depends on the engine clearances, operating range and builder's oil-pressure target. Use the Boundary specification sheet and engine-builder guidance.

Is a crank seal included?

The manufacturer page does not identify a crank seal as included. Select gaskets and seals separately for the exact engine and service procedure.

What warranty applies?

Boundary lists a lifetime warranty for this pump assembly.

Installation Instructions

  1. Confirm VQ-S2-DE-M, the VQ35DE engine code, crank interface, pump housing and selected pressure configuration before disassembly.
  2. Follow the applicable Nissan or Infiniti factory service manual for access, removal, sealing surfaces and fastener procedures.
  3. Inspect the crank drive flats, timing components, oil passages, pickup and sealing surfaces before installing the replacement pump.
  4. Use the correct new gaskets and seals for the verified engine application; do not reuse damaged sealing components.
  5. Follow the supplied Boundary blueprint sheet for the pump's relief-pressure setup and any builder-specific clearance checks.
  6. Prime the lubrication system before startup, then verify oil pressure and inspect for leaks before loading the engine.

Boundary VQ35DE High-Flow Oil Pump with MartenWear

Boundary
BOUVQ-S2-DE-M
Oil Pumps
1 Units In Stock
$ 780.63
$ 780.63

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×