Brembo OE 99-05 Porsche 911 Front Disc Brake Kit

Complete OE Front Brake Kit for the 1999-2005 Porsche 911 Carrera

The Brembo BREKT00732 is a complete front disc brake kit built for the 1999-2005 Porsche 911 (996 generation). Brembo supplies braking components directly to Porsche at the production level, and the BREKT00732 uses the same engineering and materials in an aftermarket-ready kit. The package includes two UV-coated, cross-drilled high-carbon front rotors and a full set of Prime ceramic brake pads for a complete OE-specification front brake service.

Brembo OE Engineering for the 996 Platform

The BREKT00732 rotors are manufactured from high-carbon cast iron, the same alloy specification Porsche uses on the 911 production line. Compared to standard grey iron, high-carbon material delivers superior vibration damping, reduced brake noise, and better thermal conductivity for faster heat dissipation during sustained or aggressive braking. The UV-coated, cross-drilled rotor pattern vents gas and heat from the braking surface and matches the factory appearance of the 996 platform. Prime ceramic pads deliver low dust output, reduced noise, and OE-matched friction characteristics from cold ambient temperatures through extended braking events.

Key Features

• Complete front brake kit with two UV-coated cross-drilled high-carbon OE-specification front rotors and Prime ceramic pads
• High-carbon cast iron rotor alloy for superior vibration damping, noise reduction, and heat dissipation
• Cross-drilled rotor design vents heat and gas buildup during hard braking
• UV coating prevents shipping corrosion and burns off cleanly during initial bedding
• Prime ceramic pads deliver low dust, low noise OE-matched braking performance at all temperatures
• Brembo is the OE brake supplier to Porsche, ensuring production-line fitment and engineering standards
• All rotor fixing hardware included for a complete front brake service
• Direct bolt-on fitment to 1999-2005 Porsche 911 factory caliper brackets

Fitment

Specifications

What's Included

• 2x Brembo high-carbon UV-coated cross-drilled front brake rotors
• 1x set Brembo Prime ceramic front brake pads
• Rotor fixing hardware kit

About Brembo

Brembo has been an OE brake supplier to Porsche for decades, engineering braking systems for the 911, Cayenne, Panamera, and Taycan platforms. Founded in 1961 in Bergamo, Italy, Brembo manufactures every aftermarket kit to the same tolerances and material standards used on the Porsche assembly line. The BREKT00732 represents true factory-grade brake engineering available to the aftermarket without compromise.

Frequently Asked Questions

The BREKT00732 fits the 1999-2005 Porsche 911 Carrera, Carrera 4, Carrera 4S, and Carrera S (996 generation). Confirm your exact model year and trim before ordering as rotor dimensions vary across 911 variants.

Yes. The BREKT00732 is a complete front disc brake kit including two front rotors, a full set of front brake pads, and all rotor fixing hardware. No additional components are needed for a complete front brake service.

All three kits fit the 1999-2005 Porsche 911 front axle but include different rotor and pad specification combinations. Each kit uses a specific rotor diameter and pad friction code matched to a particular 911 variant. Verify the correct kit for your specific trim before ordering.

The UV coating protects the rotor surface from oxidation during shipping and storage. It burns off completely during the initial brake bedding process and has no effect on braking performance once the rotor is installed and broken in.

Yes. The BREKT00732 rotors are dimensioned to OE specification for the 1999-2005 911 and bolt directly to the factory caliper brackets. No spacers or adapters are required.

Yes. Perform 8 to 10 moderate stops from 40 mph, with full cooling time between each stop, before driving aggressively. Bedding ensures even pad material transfer to the rotor surface and prevents vibration, noise, or uneven wear in service.

Yes. Brembo supplies braking systems directly to Porsche for production vehicles including the 911. The BREKT00732 is manufactured using the same high-carbon rotor alloy and ceramic pad compounds as the Porsche factory brake system.

Yes. Brembo backs OE replacement kits with a limited warranty on materials and workmanship. Contact your point of purchase for warranty terms and claim procedures.

Installation Instructions

1. Safely raise the vehicle on a lift or jack stands and remove the front wheels.
2. Unbolt and remove the front brake caliper. Hang from a hook without stressing the brake line.
3. Remove the caliper bracket and set aside.
4. Remove the old front rotor. Use a rubber mallet to free from the hub if necessary.
5. Clean the hub face with a wire brush and brake cleaner before mounting the new rotor.
6. Install the new BREKT00732 rotor onto the hub and hold flush with a temporary lug nut.
7. Reinstall and torque the caliper bracket to Porsche factory specification.
8. Install the new Prime ceramic pads into the caliper carrier. Apply brake lubricant to pad contact points only, not the friction surface.
9. Compress the front caliper piston using a brake pad spreader or C-clamp.
10. Reinstall the caliper and torque to factory specification.
11. Reinstall the wheel and torque to Porsche factory specification.
12. Pump the brake pedal until firm before moving the vehicle. Check brake fluid and top off as needed.
13. Complete the full bedding procedure before spirited driving or track use.

WARNING: This product can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.