Brembo DOT 5.1 Brake Fluid (500 ML)

This Brembo brake fluid is an exact-part-number brake component for the verified 2005-2023 Porsche 911 Carrera GT3 application listed below. Match manufacturer part number L05005, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• High Boiling Point: Dry 272C exceeds DOT 5.1 minimum resists vapor lock during repeated hard stops.
• Anti-Corrosion Protection: Resists oxidation prevents rust in calipers lines master cylinders.
• Standards Compliance: Meets DOT 5.1 ISO 4925 Class 6 SAE J1704 fully backward compatible with DOT 4.
• Bleed brakes from farthest caliper to master cylinder using pressure bleeder.
• Engineered for extreme heat pressure in F1 MotoGP.
• Compatible with EPDM rubber seals in DOT 4 5.1 rated systems only.

Fitment

Specifications

What's Included

One new Brembo product identified by manufacturer part number L05005. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo DOT 5.1 Brake Fluid (1000 ML)
• Brembo DOT 4 Brake Fluid (500 ML)
• Brembo DOT 4 Brake Fluid (1000 ML)

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2005-2023 Porsche 911 Carrera GT3?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.