-8%
Click to zoom in
Restore the Tacoma Exhaust to Factory Routing
BRExhaust 106-0404 is a direct-fit replacement exhaust system for the 1998-2000 Toyota Tacoma with the 2.4L four-cylinder engine. Its single standard-replacement muffler, 2 in aluminized steel piping and OEM-location exit restore the original exhaust path without changing the truck into a louder performance application.
Key Features
- Direct-fit OE replacement for the verified 1998-2000 Toyota Tacoma 2.4L application.
- 2 in mandrel-bent aluminized steel main piping.
- Single standard-replacement muffler with a 15.5 in body.
- Bolt-on multi-piece construction designed to route around chassis obstacles without cutting or welding.
- One exhaust tip exits at the OEM location.
- Factory hangers and isolators are reused because replacement hangers are not included.
- BRExhaust 106-0404 is covered by a two-year, unlimited-mileage warranty.
Fitment
| Vehicle | Engine and years |
|---|---|
| Toyota Tacoma | 1998-2000, 2.4L L4 |
Confirm the 2.4L four-cylinder engine and compare the tailpipe route with the truck before ordering. The published application does not establish every cab, bed or drivetrain restriction.
Specifications
| Detail | Value |
|---|---|
| Brand | BRExhaust |
| MPN | 106-0404 |
| UPC | 888563163291 |
| Series | Direct-Fit Exhaust Series |
| System type | Cat-back OE replacement |
| Muffler type | Standard replacement |
| Muffler quantity | 1 |
| Muffler body | 7 in H x 15.5 in L x 7 in W |
| Main piping diameter | 2 in |
| Pipe and muffler material | Aluminized steel |
| Finish | Aluminized satin |
| Tip quantity | 1 |
| Exit style | OEM location |
| Inlet type | Bolt-on |
| Clamp type | U-bolt |
| Hangers included | No |
| Mounting bracket included | No |
| Catalytic converter included | No |
| Warranty | Two years, unlimited mileage |
What's Included
- BRExhaust 106-0404 direct-fit exhaust system with pipes, one muffler and tailpipe
- One 2-bolt gasket
- One ring gasket
- Three 2.125 in U-bolt clamps
- Two bolts and four nuts
- Installation instructions
About BRExhaust
BRExhaust is MagnaFlow’s OE-replacement exhaust line, built to restore factory-style routing and function on older vehicles. BRExhaust 106-0404 uses aluminized steel and a single-muffler layout for the 1998-2000 Toyota Tacoma 2.4L application, with interchange coverage for Toyota OE parts 17430-0C011, 17430-0C012, 17430-0C021, 17430-0C022, 17430-0C031, 17430-0C032, 17430-0C041 and 17430-0C042.
Related Parts
FAQ
What is the 106-0404?It is a direct-fit, post-converter replacement exhaust system for the 1998-2000 Toyota Tacoma with the 2.4L four-cylinder engine.
Which Tacoma engine does this exhaust fit?The verified application is the 2.4L L4 from 1998 through 2000.
How many mufflers are included?One standard-replacement muffler is included.
Are replacement hangers supplied?No. The factory hangers and isolators are reused, so inspect them before installation.
Does the kit include a catalytic converter?No. The system replaces the exhaust behind or near the last catalytic converter.
Is cutting or welding required?No. The multi-piece system uses bolt-on connections and the supplied clamps and hardware.
What size is the main piping?The main piping is 2 inches in diameter.
Which gaskets and hardware are included?The kit includes one 2-bolt gasket, one ring gasket, three U-bolt clamps, two bolts and four nuts.
What warranty applies?The manufacturer warranty is two years with unlimited mileage.
Installation Instructions
- Allow the exhaust to cool completely and raise the truck securely on a lift or rated jack stands.
- Inspect the existing hangers and isolators because replacement hangers are not included.
- Apply penetrating oil to the front joint fasteners and hanger connections before removing the original system.
- Support the old exhaust, disconnect it near the last catalytic converter and remove the sections from the factory hangers.
- Lay the new kit beside the original exhaust and compare the pipe routing, muffler position and tailpipe bend.
- Install the front section with the appropriate supplied gasket and start the fasteners by hand.
- Fit the muffler and tailpipe with the U-bolt clamps loose enough for alignment, then seat the factory hangers.
- Set clearance around the frame, leaf springs, spare-tire carrier and fuel system before tightening.
- Tighten the front connection and clamps from front to rear, start the engine, check for leaks and recheck the hardware after a complete heat cycle.
Prop 65 Warning
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Catback
A catback exhaust system replaces everything from the catalytic converter back, covering the mid pipe, muffler, and tailpipe section in one bolt on upgrade. This collection covers catback systems for trucks, Jeeps, muscle cars, imports, and performance SUVs, giving you a straightforward way to improve sound, exhaust flow, and rear end styling without touching the factory catalytic converters or front pipe. Catback systems are available in stainless steel and titanium construction, with dual rear exit, single exit, and quad tip configurations, and a range of sound levels from mild touring tone to aggressive track character. Whether you want a deeper daily driver sound or a full track ready exhaust note, you will find a matched system for your platform here. What This Category Covers This collection includes complete catback exhaust systems, cat-back kits, dual rear exit systems, axle back adjacent catback upgrades, stainless steel and titanium exhaust systems, and street, tourin...
View Catback Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products
MagnaFlow
MagnaFlow exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop MagnaFlow Street Series cat-back systems, axle-back exhausts, mufflers, direct-fit catalytic converters, resonators, and exhaust tips for Chevrolet Silverado, Ford F-150, RAM 1500, Jeep Wrangler and Gladiator, Nissan 350Z, Toyota Tacoma and Yaris, and Volkswagen and BMW platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 922 MagnaFlow SKUs across cat-back, axle-back, muffler, and catalytic converter categories. What This Brand Covers MagnaFlow is known for straight-through stainless steel mufflers, a signature deep tone, and one of the widest direct-fit vehicle applications in the aftermarket exhaust industry, including gas and diesel trucks, SUVs, muscle cars, and import platforms. Core Product Families Street Series cat-back systems deliver a bold, aggressive tone for d...
View MagnaFlow Products