View vehicle applications
Fitment notes and restrictions
Description
Add progressive bottoming control without limiting normal suspension travel
Camburg CAM-110178-3 is the front Slapper bump stop system for the 2017-2020 Ford F-150 Raptor. Its linkage keeps the hydraulic bump stop clear during normal travel, then brings it into controlled contact with the lower arm near full compression for harder desert and trail impacts.
Key Features
- Camburg CAM-110178-3 is matched to the verified application and configuration
- Patented Slapper linkage maintains a consistent motion ratio near full compression
- Pair of Camburg proprietary 2.5-inch hydraulic bump stops
- Contacts the lower control arm squarely as the suspension approaches bottoming
- Stays clear of the lower arm through the normal ride zone
- Designed to reduce harsh metal-to-metal bottoming during aggressive off-road use
- Vehicle-specific front system for the listed second-generation Raptor
Application details and restrictions
| Years | Make | Model | Required Configuration |
|---|---|---|---|
| 2017-2020 | Ford | F-150 | Raptor; front suspension |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | CAM-110178-3 |
| Position | Front |
| Bump Stop Diameter | 2.5 in |
| System | Patented Slapper linkage with hydraulic bump stops |
| Vehicle Platform | Second-generation Ford F-150 Raptor |
| UPC | 888563221656 |
What's Included
- One exact Camburg CAM-110178-3 front Slapper bump stop kit with two Camburg 2.5-inch bump stops
- Vehicle-specific brackets, Slapper arms, and supplied mounting hardware shown with the exact kit
- Unrelated rear bump stops, tools, and suspension components are not included
About Camburg
Camburg engineers off-road suspension systems around controlled wheel travel, alignment, and high-load desert use. Its Slapper system uses a linkage to engage a hydraulic bump stop only near the end of compression travel.
Related Parts
- No internal product is linked because rear bump stops, shocks, springs, and control arms must be verified independently for the exact Raptor configuration.
FAQ
What is the CAM-110178-3?It is front hydraulic bump stop kit for the front suspension of a 2017-2020 Ford F-150 Raptor.
What application must be confirmed before ordering?Confirm the vehicle is a 2017-2020 F-150 Raptor and review the current Camburg installation instructions, mounting locations, suspension travel, and clearance before beginning.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Inspect the lower control arms, shocks, springs, factory bump-stop area, steering, brake hoses, and surrounding structure before installation.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Confirm Camburg CAM-110178-3, the application, and every listed restriction before installation.
- Support the vehicle safely and follow Camburg's current procedure for access to the frame and lower-arm contact areas.
- Position the vehicle-specific brackets and linkage without altering their intended geometry.
- Install the supplied hydraulic bump stops and hardware, then torque all fasteners to Camburg's current specifications.
- Cycle the suspension carefully to verify square engagement, normal-travel clearance, and clearance from steering, brakes, tires, and chassis components.
- Road-test conservatively, recheck all hardware, and inspect the system after the initial off-road use interval.




