Click to zoom in
SKU: B572101 | UPC: 799928868815
Cobb 2010-2013 Mazdaspeed3 Gen2 SS 3in Cat-Back Exhaust
The Cobb SS 3in Cat-Back Exhaust (MPN 572101) replaces the factory exhaust from the catalytic converter rearward on 2010-2013 Mazdaspeed3 models. Mandrel-bent 3-inch piping and high-flow muffler improve exhaust scavenging for better throttle response, horsepower gains up to 8 whp, and torque increases up to 12 ft-lbs when paired with tuning. Drivers enjoy an aggressive turbo spool sound and deep tone without interior drone.
Key Features
- T304 Stainless Steel Build: Full 409-grade mid-pipe and T304 stainless steel muffler and tips resist corrosion for long-term durability in all conditions.
- 3-Inch Mandrel-Bent Piping: Smooth bends maintain velocity and reduce restrictions, supporting higher boost levels and freeing up power across the RPM range.
- High-Flow Resonated Muffler: Enlarged internal volume quiets harsh frequencies while amplifying turbo whistle and exhaust burble for an engaging drive.
- Dual 4-Inch Polished Tips: Angled slash-cut design integrates seamlessly with the bumper for a clean, factory-plus appearance.
- Bolt-On Design: Clamps and hangers match OEM mounting points for straightforward replacement without fabrication.
Product Notes
- Retains factory catalytic converter position for emissions compatibility where required.
- Clean with mild soap avoid abrasive cleaners to preserve finish.
Installation Notes
- Professional installation recommended.
- Requires basic hand tools torque clamps to 40 ft-lbs and verify clearances after heat cycles.
- Uses factory rubber hangers and stainless clamps no welding or cutting needed.
This Part Fits
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2013 | Mazda | 3 | Mazdaspeed3 |
Why Choose Cobb?
- Engineered by Mazda specialists with dyno-proven designs for Mazdaspeed platforms.
- U.S.-made components backed by limited lifetime warranty on defects.
- Direct-fit systems tested for thousands of miles on track and street.
Frequently Asked Questions
-
Q: Will this fit a 2013 Mazdaspeed3 with stock downpipe?
A: Yes, it bolts directly to the factory cat-back flange on all 2010-2013 Mazdaspeed3 models regardless of downpipe or tuning setup. -
Q: What material is used in construction?
A: T304 stainless steel tips and muffler over 409-grade piping ensures heat resistance up to 1600°F and rust-proof performance. -
Q: What warranty applies and how is installation covered?
A: Limited lifetime warranty against manufacturing defects; warranty valid with professional or proper DIY install following instructions.
Shipping & Handling
- Method: UPS Ground or FedEx Ground
- Availability: In stock - ships same or next business day
- Packaging: Securely boxed at 42" x 14" x 12" with foam protection
- Weight: 28 lbs (shipping)
Catback
A catback exhaust system replaces everything from the catalytic converter back, covering the mid pipe, muffler, and tailpipe section in one bolt on upgrade. This collection covers catback systems for trucks, Jeeps, muscle cars, imports, and performance SUVs, giving you a straightforward way to improve sound, exhaust flow, and rear end styling without touching the factory catalytic converters or front pipe. Catback systems are available in stainless steel and titanium construction, with dual rear exit, single exit, and quad tip configurations, and a range of sound levels from mild touring tone to aggressive track character. Whether you want a deeper daily driver sound or a full track ready exhaust note, you will find a matched system for your platform here. What This Category Covers This collection includes complete catback exhaust systems, cat-back kits, dual rear exit systems, axle back adjacent catback upgrades, stainless steel and titanium exhaust systems, and street, tourin...
View Catback Products
COBB
COBB Tuning parts for turbocharged performance platforms are stocked at Black Ops Auto Works. Shop the Accessport ECU programmer, cold air intakes, cat back exhaust systems, and supporting hardware engineered for Subaru WRX and STI, Ford Focus ST and RS, Ford F-150 EcoBoost, Mazdaspeed3 and 6, Nissan GT-R, Porsche, BMW, and Volkswagen platforms. Every product is filterable by year, make, model, and trim so the correct part ships the first time. Black Ops Auto Works carries 372 COBB SKUs across tuning, intake, and exhaust categories. What This Brand Covers COBB Tuning built its reputation on the Accessport, one of the most widely used ECU flash tools in the aftermarket, and has expanded into intakes, exhausts, downpipes, and supporting hardware for a range of turbocharged platforms. The catalog centers on a defined group of import and Euro performance vehicles rather than a single brand family. Brand Focus COBB Tuning parts are engineered primarily for Subaru, Ford, Mazda, Nissan...
View COBB Products
Exhaust Systems
Performance exhaust systems for cars, trucks, SUVs, and Jeeps are stocked at Black Ops Auto Works. Shop cat-back systems, axle-back systems, turbo-back systems, headers, downpipes, mid-pipes, mufflers, resonators, catalytic converters, exhaust tips, exhaust valve controllers, oxygen sensors, exhaust brakes, and motorcycle and powersports exhausts for Mustang, Camaro, Challenger, Corvette, Silverado, and Super Duty platforms. Every product is filterable by exhaust position, material, pipe diameter, and vehicle year, make, model, and trim so the correct fitment ships the first time. Black Ops Auto Works carries 7,441 exhaust SKUs across every position of the exhaust system. What This Category Covers Exhaust upgrades change sound, appearance, and in some cases power. Exhaust fitment depends on engine, drivetrain, and factory exit position, so confirm the exact platform before ordering any exhaust component. Exhaust Position Cat-back, axle-back, turbo-back, and header-back systems e...
View Exhaust Systems Products