View vehicle applications
Fitment notes and restrictions
Description
The COBB Subaru 11-14 WRX 5-Pin Fuel Pressure Sensor Kit does not have enough exact application evidence to assign safe vehicle YMM. Match manufacturer part number 315660, complete vehicle, engine and transmission configuration, factory equipment, required calibration, emissions eligibility, interfaces, and every product note before ordering.
Key Features
- 0 to 100 PSI fuel pressure sensor for accurate real time fuel system monitoring.
- CARB EO certified for the covered Subaru WRX and STI applications.
- Relieve fuel system pressure and disconnect the vehicle battery before starting work.
- Locate the factory fuel line routing near the fuel pressure regulator and engine harness.
- Load a supported Accessport calibration to begin using the fuel pressure data.
Fitment
| Fitment Status | Fitment Verification Required |
|---|---|
| Vehicle YMM | Not assigned without exact application evidence |
| Required Verification | Confirm exact vehicle, engine, transmission, factory equipment, calibration, emissions eligibility, interfaces, and part number |
Specifications
| Manufacturer | COBB |
|---|---|
| Manufacturer Part Number | 315660 |
| Product Type | Fuel Pressure Regulators |
| Fitment Type | Fitment verification required |
What's Included
One new COBB product in the exact configuration and quantity identified by manufacturer part number 315660. Calibrations, hardware, hoses, clamps, gaskets, adapters, wiring, fluids, tools, and companion components are included only when expressly stated for this exact part number.
About COBB
COBB develops engine-management, intake, cooling, exhaust, drivetrain, suspension, and vehicle-accessory products for supported performance platforms. Correct selection remains exact-vehicle, exact-configuration, exact-interface, and exact-part-number specific.
Related COBB Products
- COBB Subaru/Toyota In-Tank 4.5 Bar Fuel Pressure Regulator Kit
- Cobb Subaru 08-21 STI (Incl. 2018 Type RA) Fuel Pressure Sensor Kit
- Cobb 08-21 Subaru STI Fuel Pressure Regulator (for Fuel Rail Kit)
Browse the COBB collection for related tuning, intake, cooling, exhaust, drivetrain, and chassis products.
Frequently Asked Questions
Why is fitment verification required for this COBB product?
Exact vehicle application evidence is not complete enough for safe YMM. Confirm the vehicle, drivetrain, factory equipment, calibration, emissions eligibility, interfaces, and exact part number before ordering.
Are all supporting parts included?
Only components expressly listed for the exact manufacturer part number are included. Tuning, hardware, hoses, clamps, gaskets, adapters, wiring, fluids, and companion components may be separate.
Is tuning or calibration required after installation?
Requirements depend on the exact product and vehicle. Intake, fuel, boost, turbo, and engine-management changes may require a compatible calibration before operation.
Installation Instructions
Follow the current COBB and factory service instructions for this exact part number. Verify fitment, factory equipment, emissions eligibility, required calibration, software and firmware, interfaces, hardware, fluid or electrical connections, and clearances before installation. Inspect the completed work and confirm safe operation before full-load use.




