-19%
Photo - Primary
Click to zoom in
View vehicle applications

Description

Seal the non-VVT 1JZ exhaust manifold with the correct oval-port pair

Cometic Gasket C14123-060 is the .060-inch HTS exhaust-to-head gasket set for Toyota Gen-1/2 1JZ-GTE 2.5L inline-six non-VVT engines. The manufacturer catalog specifies two gaskets, separating this part from the round-port VVTi-only gasket listed under a different part number.

Key Features

  • Engine-specific exhaust-to-cylinder-head gasket set
  • Designed for Toyota Gen-1/2 1JZ-GTE 2.5L inline-six non-VVT engines
  • .060-inch compressed thickness
  • HTS fiber, graphite, and stainless-steel construction
  • Oval 1.577 x 1.118-inch ports
  • Two-gasket set according to the current Cometic automotive catalog
  • Made for the non-VVT configuration; the VVTi-only application uses a different round-port part

Application details and restrictions

Engine Family Generation Verified Configuration Restriction
Toyota 1JZ-GTE 2.5L inline-six Gen-1 / Gen-2 Non-VVT exhaust manifold to cylinder head Do not substitute for the VVTi-only round-port gasket application

Specifications

Detail Value
Manufacturer Part Number C14123-060
Engine Family Toyota Gen-1/2 1JZ-GTE 2.5L I6
Application Exhaust manifold to cylinder head; non-VVT
Material HTS fiber, graphite, and stainless steel
Compressed Thickness .060 in
Port Shape Oval
Port Size 1.577 x 1.118 in
Quantity Two gaskets
UPC 191070543990
Warranty Manufacturer defect warranty under current terms

What's Included

  • Two HTS exhaust manifold gaskets for the verified non-VVT 1JZ-GTE application
  • Fasteners, studs, nuts, sealant, exhaust manifold, and unrelated engine gaskets are not included

About Cometic Gasket

Cometic manufactures application-specific sealing products for performance and service use. Material, thickness, port geometry, engine generation, and valvetrain configuration must all match before an exhaust gasket is installed.

Related Parts

  • No verified ACTIVE companion product is currently linked; select studs, nuts, and other gaskets only by their own exact manufacturer part numbers.

FAQ

What is the C14123-060?

It is exhaust manifold gasket set for the Toyota Gen-1/2 1JZ-GTE 2.5L inline-six non-VVT exhaust-to-head application.

What application must be confirmed before ordering?

Confirm the exact Gen-1/2 1JZ-GTE non-VVT engine, oval-port geometry, .060-inch compressed thickness, and the need for two exhaust-to-head gaskets. Do not use this listing for the VVTi-only round-port configuration.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Inspect the cylinder-head and manifold sealing faces, studs, nuts, flange flatness, cracks, warpage, threads, and surrounding heat shields before assembly.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm the Gen-1/2 1JZ-GTE non-VVT engine and compare the gasket ports and bolt holes before removing packaging.
  2. Allow the exhaust system to cool completely, disconnect the battery as required, and follow the current engine service procedure.
  3. Remove the manifold without damaging studs or the cylinder-head sealing surface, then remove all old gasket material without gouging either flange.
  4. Check the manifold and cylinder-head faces for cracks, warpage, erosion, and damaged threads; repair defects before installation.
  5. Position both dry gaskets in the verified orientation unless Cometic's current instructions explicitly require a different preparation.
  6. Install serviceable studs and nuts and tighten them in the manufacturer-specified sequence and stages using the current engine torque values.
  7. Reinstall heat shields and adjoining components, run the engine only after a complete inspection, and check for exhaust leaks after the first heat cycles.

California Proposition 65 Warning: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Cometic HTS Exhaust Manifold Gasket Set for Toyota Gen-1/2 1JZ-GTE

CGSC14123-060
191070543990
Exhaust Gaskets
3 Units In Stock
$ 23.29 $ 18.64
$ 18.64

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×