-24%
CORSA 21040BLK Mustang GT Xtreme cat-back with black PVD quad tips
Click to zoom in
View vehicle applications

Description

Add an aggressive V8 note without highway-speed drone

CORSA Performance 21040BLK is the Xtreme-sound 3-inch cat-back for supported 2018-2023 Ford Mustang GT fastbacks without factory Active Valve Exhaust. The system uses CORSA Reflective Sound Cancellation technology, a double X-pipe, and four 4-inch black PVD Pro-Series tips while retaining a bolt-on installation behind the factory catalytic converters.

Key Features

  • CORSA Performance 21040BLK is matched to the verified application and configuration
  • Patented Reflective Sound Cancellation technology targets cruise-speed drone
  • Xtreme sound level with a deep idle and aggressive acceleration tone
  • Three-inch mandrel-bent 304 stainless-steel tubing
  • Double X-pipe supports balanced exhaust flow and sound
  • Four 4-inch dual-wall slash-cut Pro-Series tips with black PVD finish
  • Manufacturer reports 48 percent greater flow and nine pounds less weight than stock
  • Manufacturer-reported gains of five horsepower and four pound-feet of torque may vary by vehicle and test conditions
  • Bolt-on installation with no welding required

Application details and restrictions

Years Make Model Verified Configuration
2018-2023 Ford Mustang GT 5.0L V8 fastback without factory Active Valve Exhaust
2018-2020 Ford Mustang GT Premium 5.0L V8 fastback without factory Active Valve Exhaust
2020 Ford Mustang Bullitt 5.0L V8 fastback without factory Active Valve Exhaust

Specifications

Detail Value
Manufacturer Part Number 21040BLK
System Type Cat-back
Sound Level Xtreme
Tubing Diameter 3 in
Tubing Material 304 stainless steel
Exit Dual rear with four outlets
Tip Quantity Four
Tip Size 4 in
Tip Style Dual-wall slash-cut Pro-Series
Tip Finish Black PVD
Factory Active Valve Exhaust Not compatible
Catalytic Converters Not included
UPC 847466020353
Warranty CORSA limited lifetime exhaust warranty under current terms

What's Included

  • One exact CORSA Performance 21040BLK Xtreme cat-back exhaust assembly with double X-pipe and two application-specific mufflers
  • Four 4-inch black PVD Pro-Series exhaust tips
  • Clamps and application hardware supplied in the exact CORSA kit
  • Catalytic converters, Active Valve Exhaust actuators, tools, and unrelated exhaust components are not included

About CORSA Performance

CORSA Performance develops application-specific intake and exhaust systems around measured vehicle acoustics, flow, and packaging. Its RSC muffler technology is tuned for each supported application, so this system should not be applied to unlisted Mustang engines or Active Valve Exhaust configurations.

Related Parts

  • CORSA 14327 double X-pipe and CORSA 21039 axle-back are documented component references within the polished-tip Xtreme system family; verify the exact black-tip service part before ordering replacements.
  • No internal product link is included because an exact active companion-product handle was not verified during this audit.

FAQ

What is the 21040BLK?

It is cat-back exhaust system for the supported 2018-2023 Mustang GT-family 5.0L fastbacks without factory Active Valve Exhaust.

What application must be confirmed before ordering?

Confirm the model year, Mustang GT-family trim, 5.0L V8 fastback body, and absence of factory Active Valve Exhaust before ordering.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Inspect the factory catalytic-converter connections, hangers, isolators, heat shields, rear valance, underbody braces, and surrounding wiring before installation.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm CORSA Performance 21040BLK, the application, and every listed restriction before installation.
  2. Review the current CORSA instructions, let the exhaust cool fully, and support the vehicle at the factory-approved lifting points.
  3. Support the original exhaust, loosen the factory connections, and remove the cat-back while protecting oxygen-sensor wiring, heat shields, and nearby components.
  4. Loosely assemble the double X-pipe, intermediate sections, mufflers, and black PVD tips using the supplied clamps and hardware.
  5. Align the tubing and all four tips with adequate body, suspension, heat-shield, and rear-valance clearance before final tightening.
  6. Tighten every connection in the current CORSA sequence and to the manufacturer-specified values without substituting guessed torque settings.
  7. Start the vehicle, inspect for leaks or contact, verify tip alignment through heat cycling, and recheck all clamps after the initial drive.

California Proposition 65 Warning: CORSA identifies this exhaust product with a California Proposition 65 warning for cancer and reproductive harm. Review the current manufacturer warning before handling or installation.

CORSA Xtreme 3-Inch Cat-Back for 2018-2023 Ford Mustang GT

COR21040BLK
847466020353
Catback
2 Units In Stock
$ 2,931.93 $ 2,199.99
$ 2,199.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×