DeatschWerks HEMI-FPHWK-PNP plug-and-play fuel pump hardwire harness
Click to zoom in
View vehicle applications

Description

Deliver battery voltage to the pump without cutting the factory harness

DeatschWerks HEMI-FPHWK-PNP is a plug-and-play fuel-pump hardwire kit for supported 2006-2023 Dodge Charger and Chrysler 300 applications plus 2008-2023 Dodge Challenger. Dedicated 10AWG power and ground circuits, a high-amp relay, and factory-compatible connections reduce voltage drop while retaining the original pump trigger.

Key Features

  • DeatschWerks HEMI-FPHWK-PNP is matched to the verified application and configuration
  • Dedicated 10AWG power and ground circuits
  • High-amp relay retains factory pump triggering
  • Plug-and-play connections require no cutting or splicing
  • Compatible with supported OEM and DeatschWerks fuel-pump modules
  • Helps reduce voltage drop and terminal heating under higher pump load
  • For high-mileage vehicles, DeatschWerks strongly recommends replacing filter module 8-05-7106
  • Limited lifetime warranty under current terms

Application details and restrictions

Years Make Model Verified Requirement
2006-2023 Dodge Charger Confirm factory connector and fuel-module compatibility
2008-2023 Dodge Challenger Confirm factory connector and fuel-module compatibility
2006-2023 Chrysler 300 Manufacturer product page lists 300C; confirm factory connector and module before ordering

Specifications

Detail Value
Manufacturer Part Number HEMI-FPHWK-PNP
Product Type Plug-and-play fuel-pump hardwire kit
Power and Ground 10AWG
Control High-amp relay with factory pump trigger
Installation No cutting or splicing under supported configuration
Module Compatibility Supported OEM and DeatschWerks modules
High-Mileage Recommendation Replace filter module 8-05-7106
UPC 887753548931
Warranty DeatschWerks limited lifetime warranty under current terms

What's Included

  • One exact DeatschWerks HEMI-FPHWK-PNP plug-and-play hardwire harness assembly
  • High-amp relay, dedicated power and ground leads, and factory-compatible connectors shown with the exact kit
  • Fuel pump module, filter module 8-05-7106, tools, and unrelated wiring are not included

About DeatschWerks

DeatschWerks develops application-specific pumps, modules, injectors, and wiring around verified flow, pressure, fuel compatibility, and electrical demand. Every upgrade must be selected as part of a complete fuel system rather than by peak pump flow alone.

Related Parts

  • DeatschWerks recommends filter module 8-05-7106 for high-mileage vehicles; no internal link is included until the exact active product is verified.

FAQ

What is the HEMI-FPHWK-PNP?

It is the exact application-specific fuel-system component for 2006-2023 Dodge Charger, 2008-2023 Dodge Challenger, and supported 2006-2023 Chrysler 300/300C fuel-pump circuits. Confirm the factory connector and module. DeatschWerks recommends filter module 8-05-7106 for high-mileage applications..

What is the most important specification?

10AWG

What is included?

plug-and-play hardwire harness assembly.

What must be confirmed before ordering?

Confirm model year, Charger, Challenger, or 300/300C application, factory connector, pump-module compatibility, battery routing, fuse protection, and current wiring condition.

Is it compatible with ethanol-based fuel?

DeatschWerks identifies the product as ethanol compatible, but every hose, fitting, seal, filter, regulator, and electrical component in the complete fuel system must also be compatible.

Does this replace every fuel-system component?

No. Only the exact components listed in the included-items section are supplied; required plumbing, wiring, tuning, or companion parts remain separate unless expressly listed.

Is professional installation recommended?

Yes. Fuel-system work requires safe depressurization, vapor control, leak-free plumbing, correct wiring, and verification by a qualified installer.

What should be checked after installation?

Prime the system, inspect every connection for leaks, confirm stable fuel pressure and electrical operation, and correct any abnormal heat, noise, pressure, or level-sensor behavior before driving.

Installation Instructions

  1. Confirm DeatschWerks HEMI-FPHWK-PNP, the application, and every listed restriction before installation.
  2. Relieve fuel pressure, disconnect battery power, control vapors, and access the module according to the current vehicle service procedure.
  3. Inspect and clean the tank opening, surrounding wiring, lines, seal surface, and related fuel-system components.
  4. Install the exact DeatschWerks component according to its current guide without forcing connectors, hoses, seals, or module indexing.
  5. Complete the required wiring and companion-component work with correct fuse protection, grounding, routing, and fuel-compatible materials.
  6. Prime the system, inspect for leaks, verify pressure, pump control and level-sensor behavior, then complete calibration and load testing before normal use.

California Proposition 65 Warning: The source catalog flags this product for California Proposition 65. Review the current manufacturer warning and safe-handling information before installation.

DeatschWerks Plug-and-Play Fuel Pump Hardwire Kit for 2006-2023 Hemi Cars

DeatschWerks
DWKHEMI-FPHWK-PNP
887753548931
Fuel Pumps
196 Units In Stock
$ 149.00
$ 149.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×