View vehicle applications
Fitment notes and restrictions
Description
Increase fuel capacity without rebuilding the original pump bucket
DeatschWerks 9-437-7202 is a complete DW400 performance fuel module for the 2010-2015 Chevrolet Camaro. It retains the factory returnless layout while adding a 415 lph pump, ethanol-compatible filter, 4-bar in-tank regulator, and new fuel-level sensor.
Key Features
- DeatschWerks 9-437-7202 is matched to the verified application and configuration
- 415 lph DW400-series fuel delivery
- Twelve percent more flow than the OEM ZL1 module
- Manufacturer reports 25 percent less current draw than the OEM ZL1 module
- Supports up to 700 horsepower on gasoline or 550 horsepower on E85 under manufacturer test assumptions
- Complete replacement assembly retains factory returnless operation
- Ethanol-compatible filter, 4-bar regulator, and new level sensor
- Ten-gauge hardwire kit FPHWK-10-HD is strongly recommended
Application details and restrictions
| Years | Make | Model | Verified Requirement |
|---|---|---|---|
| 2010-2015 | Chevrolet | Camaro | Factory returnless fuel system; confirm engine, target power, fuel, pressure, wiring, and tuning. A 10-gauge hardwire kit is strongly recommended. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 9-437-7202 |
| Series | DW400 |
| Flow Rate | 415 lph |
| Feed | Factory connection |
| Regulator | 4-bar in-tank |
| Filter | Ethanol compatible |
| Level Sensor | New sensor included |
| Recommended Wiring | FPHWK-10-HD 10-gauge hardwire kit |
| UPC | 887753548993 |
| Warranty | DeatschWerks limited lifetime warranty under current terms |
What's Included
- One exact DeatschWerks 9-437-7202 complete DW400 Camaro fuel module assembly
- Ethanol-compatible filter, 4-bar regulator, and new fuel-level sensor integrated into the module
- FPHWK-10-HD hardwire kit, tuning, tools, and unrelated fuel-system parts are not included
About DeatschWerks
DeatschWerks develops application-specific pumps, modules, injectors, and wiring around verified flow, pressure, fuel compatibility, and electrical demand. Every upgrade must be selected as part of a complete fuel system rather than by peak pump flow alone.
Related Parts
- DeatschWerks FPHWK-10-HD is strongly recommended for pump voltage; no internal link is included unless its exact active handle is verified.
FAQ
What is the 9-437-7202?It is the exact application-specific fuel-system component for 2010-2015 Chevrolet Camaro with the supported factory returnless fuel system. Confirm engine, fuel, target power, pressure, wiring, and calibration. DeatschWerks strongly recommends FPHWK-10-HD for maximum pump voltage..
What is the most important specification?415 lph
What is included?complete DW400 Camaro fuel module assembly.
What must be confirmed before ordering?Confirm 2010-2015 Camaro fitment, factory returnless system, engine, fuel, horsepower target, pressure, wiring capacity, and calibration.
Is it compatible with ethanol-based fuel?DeatschWerks identifies the product as ethanol compatible, but every hose, fitting, seal, filter, regulator, and electrical component in the complete fuel system must also be compatible.
Does this replace every fuel-system component?No. Only the exact components listed in the included-items section are supplied; required plumbing, wiring, tuning, or companion parts remain separate unless expressly listed.
Is professional installation recommended?Yes. Fuel-system work requires safe depressurization, vapor control, leak-free plumbing, correct wiring, and verification by a qualified installer.
What should be checked after installation?Prime the system, inspect every connection for leaks, confirm stable fuel pressure and electrical operation, and correct any abnormal heat, noise, pressure, or level-sensor behavior before driving.
Installation Instructions
- Confirm DeatschWerks 9-437-7202, the application, and every listed restriction before installation.
- Relieve fuel pressure, disconnect battery power, control vapors, and access the module according to the current vehicle service procedure.
- Inspect and clean the tank opening, surrounding wiring, lines, seal surface, and related fuel-system components.
- Install the exact DeatschWerks component according to its current guide without forcing connectors, hoses, seals, or module indexing.
- Complete the required wiring and companion-component work with correct fuse protection, grounding, routing, and fuel-compatible materials.
- Prime the system, inspect for leaks, verify pressure, pump control and level-sensor behavior, then complete calibration and load testing before normal use.
California Proposition 65 Warning: The source catalog flags this product for California Proposition 65. Review the current manufacturer warning and safe-handling information before installation.




