View vehicle applications
Fitment notes and restrictions
Description
Add 65 percent more flow than the factory 5.7L module
DeatschWerks 9-437-7262 is a 415 lph DW400 performance module for supported 2020-2023 Dodge Charger, Dodge Challenger, and Chrysler 300 applications other than the 6.2L. It retains the factory fuel connection, and DeatschWerks strongly recommends the plug-and-play Hemi hardwire kit for stable pump voltage.
Key Features
- DeatschWerks 9-437-7262 is matched to the verified application and configuration
- 415 lph DW400-series fuel module
- Sixty-five percent more flow than the OEM 5.7L module
- Factory-style feed connection
- Supports compatible 5.7L and 6.4L applications
- Explicitly excludes 6.2L applications
- Ethanol-compatible under current manufacturer specifications
- HEMI-FPHWK-PNP hardwire kit strongly recommended
Application details and restrictions
| Years | Make | Model | Verified Requirement |
|---|---|---|---|
| 2020-2023 | Dodge | Charger / Challenger | 5.7L or 6.4L supported configurations; excludes 6.2L |
| 2020-2023 | Chrysler | 300 | Supported non-6.2L application; confirm engine and module configuration |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | 9-437-7262 |
| Series | DW400 |
| Flow Rate | 415 lph |
| Feed | Factory connection |
| Flow Increase | 65 percent over OEM 5.7L module |
| Engine Restriction | Excludes 6.2L |
| Recommended Wiring | HEMI-FPHWK-PNP |
| UPC | 887753548948 |
| Warranty | DeatschWerks limited lifetime warranty under current terms |
What's Included
- One exact DeatschWerks 9-437-7262 complete DW400 performance fuel module
- Integrated pump, module hardware, and level-sender components shown with the exact assembly
- HEMI-FPHWK-PNP hardwire kit, tuning, tools, and unrelated fuel-system parts are not included
About DeatschWerks
DeatschWerks develops application-specific pumps, modules, injectors, and wiring around verified flow, pressure, fuel compatibility, and electrical demand. Every upgrade must be selected as part of a complete fuel system rather than by peak pump flow alone.
Related Parts
- DeatschWerks HEMI-FPHWK-PNP is the manufacturer-recommended plug-and-play hardwire kit; no internal link is included until the exact active handle is verified.
FAQ
What is the 9-437-7262?It is the exact application-specific fuel-system component for 2020-2023 Dodge Charger, Dodge Challenger, and Chrysler 300 with supported 5.7L or 6.4L fuel-module configurations. Excludes every 6.2L application. HEMI-FPHWK-PNP is strongly recommended..
What is the most important specification?415 lph
What is included?complete DW400 performance fuel module.
What must be confirmed before ordering?Confirm model, model year, 5.7L or 6.4L engine, fuel-module configuration, fuel, target power, wiring capacity, and calibration. Do not use on a 6.2L application.
Is it compatible with ethanol-based fuel?DeatschWerks identifies the product as ethanol compatible, but every hose, fitting, seal, filter, regulator, and electrical component in the complete fuel system must also be compatible.
Does this replace every fuel-system component?No. Only the exact components listed in the included-items section are supplied; required plumbing, wiring, tuning, or companion parts remain separate unless expressly listed.
Is professional installation recommended?Yes. Fuel-system work requires safe depressurization, vapor control, leak-free plumbing, correct wiring, and verification by a qualified installer.
What should be checked after installation?Prime the system, inspect every connection for leaks, confirm stable fuel pressure and electrical operation, and correct any abnormal heat, noise, pressure, or level-sensor behavior before driving.
Installation Instructions
- Confirm DeatschWerks 9-437-7262, the application, and every listed restriction before installation.
- Relieve fuel pressure, disconnect battery power, control vapors, and access the module according to the current vehicle service procedure.
- Inspect and clean the tank opening, surrounding wiring, lines, seal surface, and related fuel-system components.
- Install the exact DeatschWerks component according to its current guide without forcing connectors, hoses, seals, or module indexing.
- Complete the required wiring and companion-component work with correct fuse protection, grounding, routing, and fuel-compatible materials.
- Prime the system, inspect for leaks, verify pressure, pump control and level-sensor behavior, then complete calibration and load testing before normal use.
California Proposition 65 Warning: The source catalog flags this product for California Proposition 65. Review the current manufacturer warning and safe-handling information before installation.




