DeatschWerks 9-811-C103-1002 DW810 pump, C103 controller and installation kit
Click to zoom in
View vehicle applications

Description

Match high fuel demand without running the pump at full output continuously

DeatschWerks 9-811-C103-1002 combines the 810 lph DW810 in-tank brushless pump, 9-1002 installation components, and C103 PWM controller. The controller supports true PWM control, dual-speed operation, and 8-26V input so a compatible engine-management system can reduce unnecessary circulation, fuel heating, and electrical load at lower demand.

Key Features

  • 810 lph DW810 brushless in-tank pump
  • C103 PWM brushless controller included
  • True PWM speed control with compatible engine management
  • Dual-speed capability when a PWM strategy is not available
  • Controller supports 8-26V input and compatible voltage boosters
  • 9-1002 installation components included
  • Ethanol compatible under current manufacturer specifications
  • Universal installation requires complete dimensional, hydraulic, and electrical engineering

Application details and restrictions

Application Type Verified Requirements
Universal custom fuel system Confirm pump dimensions, tank or module compatibility, 810 lph flow needs, fuel, pressure, plumbing, filtration, regulator, controller programming, 8-26V electrical supply, current capacity, bulkhead connections, and engine management. No year-make-model fitment applies.

Specifications

Detail Value
Manufacturer Part Number 9-811-C103-1002
Series DW810
Pump Type In-tank brushless
Flow Rate 810 lph
Controller C103 PWM brushless controller
Control Modes PWM and dual speed
Controller Input 8-26V
Installation Kit 9-1002 components included
UPC 887753549105
Warranty DeatschWerks limited lifetime warranty under current terms

What's Included

  • DW810 810 lph in-tank brushless fuel pump
  • C103 PWM brushless controller
  • 9-1002 installation components and the exact fittings, hose, clamps, connectors, and small parts shown
  • Tank module, external plumbing, filter, regulator, engine management, bulkhead connector, and unrelated wiring are not included unless shown in the exact package

About DeatschWerks

DeatschWerks develops brushless pumps and controllers as coordinated hydraulic and electrical systems. Pump flow, pressure, voltage, current, fuel temperature, filtration, regulation, wiring, controller strategy, and engine management must all be engineered together.

Related Parts

  • A compatible high-current bulkhead connector, filter, regulator, plumbing, and engine-management strategy must be selected by specification. No unverified internal product link is included.

FAQ

What is the 9-811-C103-1002?

It is an 810 lph brushless in-tank pump kit with C103 controller for custom fuel systems meeting every DW810 and C103 requirement.

What is the most important specification?

The pump is rated at 810 lph and the controller supports PWM, dual-speed operation, and 8-26V input.

What is included?

The DW810 pump, C103 controller, and 9-1002 installation components are included.

What must be confirmed before ordering?

Confirm dimensions, fuel, flow, pressure, plumbing, filtration, regulation, voltage, current, bulkhead wiring, controller strategy, and engine management.

Is it compatible with ethanol-based fuel?

DeatschWerks identifies the product as ethanol compatible, but every hose, fitting, seal, filter, regulator, and electrical component in the complete fuel system must also be compatible.

Does this replace every fuel-system component?

No. Only the exact components listed in the included-items section are supplied; required plumbing, wiring, tuning, or companion parts remain separate unless expressly listed.

Is professional installation recommended?

Yes. Fuel-system work requires safe depressurization, vapor control, leak-free plumbing, correct wiring, and verification by a qualified installer.

What should be checked after installation?

Prime the system, inspect every connection for leaks, confirm stable fuel pressure and electrical operation, and correct any abnormal heat, noise, pressure, or level-sensor behavior before driving.

Installation Instructions

  1. Engineer the complete hydraulic, electrical, and control system around the required flow, pressure, fuel, voltage, current, and engine management.
  2. Depressurize and drain the fuel system safely, disconnect battery power, and remove all ignition sources.
  3. Install the DW810 and 9-1002 components in a compatible tank or module with correct fuel-safe hose, clamps, filtration, and sealed electrical pass-throughs.
  4. Mount the C103 controller in a protected, ventilated location and complete power, ground, pump, and control wiring with the required fuse and conductor capacity.
  5. Program and verify the PWM or dual-speed strategy so fuel pressure remains stable throughout the full operating range.
  6. Prime and leak-test the system, monitor fuel pressure, voltage, current and temperature under load, and stop immediately for any abnormal behavior.

California Proposition 65 Warning: The source catalog flags this product for California Proposition 65. Review the current manufacturer warning and safe-handling information before installation.

DeatschWerks DW810 Brushless Fuel Pump with C103 PWM Controller

DeatschWerks
DWK9-811-C103-1002
887753549105
Fuel Pumps
62 Units In Stock
$ 649.00
$ 649.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×