DEI 010110 black exhaust wrap kit with coating and locking ties
DEI 010110 black exhaust wrap rolls, coating, and ties
DEI 010110 exhaust wrap kit sealed package front view
DEI 010110 automotive exhaust wrap kit contents
DEI 010110 exhaust wrap kit box front view
DEI 010110 exhaust wrap kit package angled view
Click to zoom in
View vehicle applications

Description

Control radiant exhaust heat with one complete installation package

Design Engineering Inc. 010110 combines the black glass-fiber wrap, black HT Silicone Coating, stainless locking ties, and tie tool needed to cover a compatible set of automotive headers. The two 50-foot rolls provide 100 feet of two-inch-wide material, while correct overlap and pipe preparation remain essential to durability.

Key Features

  • Two black glass-fiber wrap rolls provide 100 feet of total coverage
  • Wrap is rated to 1,200 degrees F direct heat and 2,000 degrees F radiant heat
  • Black HT Silicone Coating helps seal and protect the installed wrap from oil, dirt, and road grime
  • Stainless steel locking ties secure the wrap without combustible fasteners
  • Manufacturer instructions call for a tight installation with approximately one-quarter-inch overlap
  • Do not use on catalytic converters, flex pipes, flex joints, or titanium exhaust tubing
  • Aerosol coating requires ground shipping within the continental United States

Application details and restrictions

Application Type Verified Requirements and Restrictions
Universal application-based product Compatible automotive exhaust headers or pipes within the published temperature limits. Confirm tubing material, diameter, length, bends, required overlap, nearby clearances, and local service requirements. Do not wrap catalytic converters, flex sections, or titanium exhaust systems.

Specifications

Detail Value
Manufacturer Part Number 010110
Wrap Material Black glass-fiber exhaust wrap
Wrap Quantity Two rolls
Roll Dimensions 2 in wide x 50 ft long each
Total Wrap Length 100 ft
Wrap Thickness 0.063 in
Direct Heat Rating 1,200 degrees F
Radiant Heat Rating 2,000 degrees F
Coating Black HT Silicone Coating aerosol
Recommended Overlap Approximately 1/4 in per current DEI instructions
UPC 607078101105
Country of Manufacture United States

What's Included

  • automotive exhaust and header wrap kit
  • Two 2-inch x 50-foot rolls of black glass-fiber exhaust wrap
  • One can of black HT Silicone Coating
  • Eight 8-inch stainless steel locking ties
  • Four 14-inch stainless steel locking ties
  • One locking-tie installation tool

About Design Engineering Inc. (DEI)

Design Engineering Inc. develops automotive thermal, acoustic, and vibration-control products for exhaust, underhood, interior, and electrical applications. Its glass-fiber wrap system depends on correct surface preparation, overlap, tie placement, coating, and heat cycling rather than a vehicle-specific mounting pattern.

Related Parts

  • Additional wrap, replacement locking ties, coating, and heat shields must be selected by exact material, size, temperature rating, and installation requirement; no unverified internal product link is included.

FAQ

What is the 010110?

It is automotive exhaust wrap kit for compatible automotive exhaust headers and pipes that meet the verified material, temperature, length, and installation requirements.

What application must be confirmed before ordering?

Measure the complete pipe run and bends, confirm the exhaust material and temperature range, and exclude catalytic converters, flex sections, and titanium tubing before ordering.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Yes. Inspect the tubing for corrosion, cracks, leaks, damaged welds, and adequate clearance before wrapping because the installed material should not be repeatedly removed after heat cycling.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm the exhaust material, pipe diameter, run length, bend count, temperature exposure, and every published restriction.
  2. Allow the exhaust to cool completely, remove loose corrosion and contamination, and repair any leaks or structural damage before wrapping.
  3. Measure and cut one primary-tube section at a time, allowing extra material for bends as directed in the current DEI instructions.
  4. Wet the glass-fiber wrap for flexibility, then apply it tightly with approximately one-quarter-inch overlap while working toward the engine where the instructions specify.
  5. Secure each section with the supplied stainless ties and trim the ties using suitable metal cutters.
  6. Let the wrap dry completely, apply the black HT Silicone Coating in accordance with its safety and curing directions, then complete the initial heat cycle in a ventilated area.
  7. Inspect tie tension, clearances, and wrap condition after the first heat cycle and during routine exhaust service.

California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

DEI Black Automotive Exhaust and Header Wrap Kit

DEI
DEI10110
Exhaust Wrap
28 Units In Stock
$ 109.99
$ 109.99

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×