DFC 06-15 Mazda MX-5 Miata Rear Brake Rotor

Brake rotors for street, track, tow, and off-road builds are stocked at Black Ops Auto Works. Shop drilled and slotted rotors, slotted-only rotors, dimpled rotors, blank OE-replacement rotors, two-piece floating rotors, high-carbon iron rotors, and vehicle-specific rotor packages for Hellcat, Trackhawk, TRX, HEMI, Coyote, LS, LT, and import platforms. Every product is filterable by year, make, model, trim, and factory brake package so the correct rotor ships the first time. Black Ops Auto Works carries 2,884 brake rotor SKUs across drilled, slotted, two-piece, and OE-replacement categories. What This Collection Covers Brake rotor selection is one of the two friction decisions on the vehicle, the other being pad compound. This collection covers rotor styles, metallurgy, sizing, and vehicle-specific fitment for daily drivers, sport cars, track builds, tow rigs, and off-road platforms. Rotor Styles Drilled and slotted, slotted-only, dimpled, blank OE-replacement, and two-piece floa...

OE brake rotors for daily drivers, luxury vehicles, trucks, and SUVs are stocked at Black Ops Auto Works. Shop OE-equivalent rotors, UV coated rotors, blank factory replacement rotors, front rotors, rear rotors, and vehicle-specific rotor sets built to match the original factory diameter, thickness, hat height, and metallurgy for a wide range of domestic, import, and luxury platforms. Every product is filterable by year, make, model, trim, and factory brake package so the correct rotor ships the first time. Black Ops Auto Works carries 889 OE brake rotor SKUs across coated, blank, and vehicle-specific replacement categories. What This Collection Covers OE brake rotors are the correct choice when the goal is to restore factory stopping performance and quiet operation after the original rotors wear past minimum thickness or develop hot spot discoloration. Unlike drilled and slotted upgrades built for aggressive street or track use, OE rotors prioritize a smooth friction surface, l...

Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...

Shop DFC brake pads, brake rotors, drum brake shoes, and replacement brake components at Black Ops Auto Works. Dynamic Friction Company offers application-specific parts for brake maintenance and replacement across passenger cars, performance vehicles, trucks, and SUVs. Compare OE-style rotors, coated high-carbon alloy rotors, selected drilled and slotted designs, and brake pad options by exact vehicle application and manufacturer part number. DFC Brake Rotors and Replacement Brake Discs This collection includes DFC OE-style brake rotors and selected high-carbon alloy rotors with GEOMET coating. Available surface configurations include plain, drilled, slotted, and drilled-and-slotted designs, depending on the application. Choose the rotor specified for your braking system rather than selecting by appearance alone. Rotor diameter, thickness, height, hub dimensions, and axle position must match the vehicle’s requirements. Some listings are specific to the left or right side. Similar m...

Choose Ford Fusion hood, window and cabin protection by exact production, drivetrain and powertrain configuration. Hybrid trunk and floor applications should remain explicit. Hood and Window Applications Match hood-protector year range and grille/fascia mounting with the actual body. Separate production revisions before choosing finish. For in-channel deflectors, compare exact window coverage and supplied piece count. Use the selected product’s installation instructions. Floor and Trunk Layout Preserve drivetrain and hybrid application notes in liner listings. A hybrid-specific trunk liner should not be transferred to another trunk configuration solely from the Fusion name. Compare front, second-row and trunk contents independently. A combination set should be checked for the exact floor areas and pieces supplied. Choose Your Part Record year, drivetrain and hybrid identity. Match hood-panel and window coverage. Compare actual floor and trunk layout. Check row and package contents....

Choose Lincoln MKZ floor and trunk protection using production, drivetrain and factory audio equipment. The displayed FWD and without-factory-subwoofer qualifiers are part of the application. Drivetrain and Cabin Coverage Compare the separately listed 2007–2009, 2010–2012 and later MKZ cabin references. Preserve FWD restrictions where stated rather than extending coverage to AWD. Review front, second-row and combo contents. A rear-row piece does not provide complete cabin protection by itself. Trunk Configuration and Other Accessories The displayed early trunk-liner reference excludes the factory subwoofer configuration. Match cargo-floor shape and installed audio equipment before selecting it. For window deflectors or engine dampers, require exact MKZ body or engine coverage. Fusion or broad EcoBoost titles do not establish every MKZ hybrid or engine installation. Choose Your Part Record year, drivetrain and factory audio. Compare cabin row contents and FWD qualifiers. Match trunk...

Identify the exact Lincoln Zephyr generation before choosing liners, deflectors or brake-service parts. Modern sedan references should not be extended to other vehicles using the Zephyr name. Cabin and Trunk Configuration Match actual footwell shape, drivetrain and retention. A later MKZ FWD liner title requires explicit coverage for the particular Zephyr body and production. For trunk protection, compare factory audio equipment, floor shape and exact package coverage. Preserve any without-factory-subwoofer restriction in the manufacturer application. Body, Brake and Suspension Interfaces Compare in-channel and outside-mount deflectors by actual door and window configuration. Fusion naming alone does not establish every Zephyr body application. For brake or suspension service, identify calipers, rotor geometry, axle and mount position as applicable. Shared Mazda or MKZ titles require exact supported coverage for the installed assembly. Choose Your Part Record exact Zephyr body and ...

Choose Mazda6 intake and body-protection options by generation, engine and transmission. Naturally aspirated, turbocharged and V6 applications require separate part-number coverage. Engine-Specific Intake Selection The displayed references distinguish 2.3L, 2.5L, 3.7L V6 and manual Mazdaspeed6 configurations. Match actual engine, sensor housing, hoses and brackets with the exact intake number. Review year coverage, emissions requirements and installation instructions. A later turbo 2.5L system should not be chosen from displacement alone. Cabin, Trunk and Hood Protection Match hood protectors to actual fascia/hood mounting and body generation. Compare cabin floor sets with separate trunk liners and their own production coverage. For an MZR damper or pedal device, verify actual engine-drive or electronic interfaces separately. Unrelated vehicle titles do not establish Mazda6 compatibility. Choose Your Part Record generation, engine and transmission. Match exact intake sensors and mo...

Compare Mazda 626 window deflectors and service components by exact body, engine and installed equipment. Each accessory and brake application requires its own production coverage. Outside-Mount Window Protection The displayed AVS reference identifies 1998–2002 Mazda 626 outside-mount four-piece deflectors. Confirm exact body coverage, attachment pattern and supplied installation pieces. For floor mats, compare footwell shape, retention and free pedal movement. Another vehicle’s mat title does not establish 626 fit. Brakes, Suspension Protection and EFI Packages Match rotors to actual calipers, axle and dimensions, and protective boots to suspension position. A Miata rotor title requires explicit 626 support. For EFI modifications, confirm engine support, fuel-system and ignition/calibration requirements. Compare bottle, controls, lines and hardware, with listed output ranges treated as configurations rather than guaranteed gains. Choose Your Part Record body, production and engine...

Choose Mazda Miata gauge mounts and engine accessories by generation, interior layout and installed engine. A-pillar pods and crankshaft dampers have very different application requirements. Gauge Pods and Interior Mounting Compare the model-year range, pillar shape and gauge count. Single, dual and triple pods provide different arrangements; 52mm and 2-1/16-inch references still require the exact gauge and mount dimensions to agree. Review attachment instructions, wiring clearance and the interior safety equipment before installation. The pod is a mounting component and should not be assumed to include gauges or sensors. Crankshaft Damper Configuration For a 1.8L damper application, compare belt grooves, pulley alignment and the trigger-wheel arrangement. Options described with and without an OEM trigger wheel require separate selection. Confirm whether the stated belt guide is included and which existing components must be retained. An engine conversion needs review against the ac...

Explore Mazda MX-5 Miata intake, exhaust and brake options by generation and engine. Keep earlier 1.8L damper configurations separate from later 2.0L intake and chassis applications. Intake and Axle-Back Exhaust Choices Compare an intake’s exact year and engine coverage, heat-shield contents and sensor connections. Polished and black finishes should be compared only after the underlying part application is established. For a single-exit axle-back exhaust, check rear-section connections, outlet position, material and supplied hardware. Confirm clearance and compatibility with the existing exhaust and body configuration. Dampers and Brake-Service Details Damper selection depends on crankshaft application, belt grooves, pulley alignment and trigger-wheel configuration. A 1.8L damper reference is not a substitute for identifying a later 2.0L engine’s drive arrangement. Match rotor geometry and caliper package separately at each axle. For a brake hose, identify left/right and front/rear ...

Compare Mazda Protege intake and gauge-mount options using the exact engine, body and interior configuration. Turbo Mazdaspeed and other Protege intake applications need separate selection. Turbo and Other Intake Applications Identify whether the vehicle retains its original engine and induction system. Compare the specific Protege5/MP3 and Mazdaspeed turbo intake applications rather than transferring coverage between them. Review tubing route, sensor provisions, mounting brackets and filter location. Existing turbo or engine-management changes need manufacturer review before a replacement intake is selected. Gauge Mounts and Brake Decisions For a triple-pillar gauge mount, compare the stated year range, pillar shape, gauge dimensions and attachment requirements. Confirm that gauges, sensors and wiring are included or source them separately. For brake service, match the installed caliper and pad shape before choosing compound. A dedicated race pad should be assessed by its intended ...

Choose Mercury Milan floor liners, window accessories and brake parts by exact year, drivetrain and installed equipment. Cabin and cargo applications should be checked separately. Cabin and Cargo Protection The displayed liner references distinguish 2006–2009 and 2010–2012 FWD applications. Require explicit Milan coverage and match actual footwell shape, retention and drivetrain configuration. A cargo-liner reference excludes the factory subwoofer. Confirm trunk equipment and liner shape before ordering; a cabin combination set does not automatically include cargo protection. Window Deflectors and Brake Service Compare in-channel and outside-mount deflectors for the exact door/window configuration. Follow the selected mounting instructions and check glass clearance. For an EBC brake kit, identify axle, caliper, rotor dimensions and supplied pad/rotor combination. A Miata rotor reference does not establish Milan compatibility. Choose Your Part Record year, drivetrain and trunk equip...