DFC 1551-1899-01 front low-metallic brake pads and hardware kit
DFC 1551-1899-01 front brake pad profiles
DFC 1551-1899-01 front brake pad hardware and clips
DFC 1551-1899-01 front brake pad backing plates
DFC 1551-1899-01 front low-metallic friction surfaces
Click to zoom in
View vehicle applications

Description

Restore front brake response with the matching pad shapes and hardware

Dynamic Friction Company 1551-1899-01 is a front-axle 5000 Advanced low-metallic brake pad set for the supported iron-disc Audi and Bentley applications. Four application-matched pads and the supplied hardware support consistent pedal feel, while the prepared electronic wear-sensor provisions require separate compatible sensors where the vehicle uses them.

Key Features

  • Dynamic Friction Company 1551-1899-01 is matched to the verified application and configuration
  • 5000 Advanced low-metallic friction formulation
  • Front-axle set with four application-specific pads
  • Hardware kit, shims, and clips included in the exact package
  • Prepared for compatible electronic pad-wear sensors; sensors are not included
  • Selected friction materials are intended for modern ABS and automated-braking systems
  • Scorched and chamfered or slotted where applicable to support initial response and noise control
  • Use only with the supported iron-disc front brake configuration

Application details and restrictions

Years Make Model and Verified Trim Position and Requirements
2020-2025 Audi RS Q8 Front axle; iron brake discs; compatible electronic wear sensors are separate where required
2024-2026 Audi RS7 Sportback Performance Front axle; iron brake discs
2019-2024 Bentley Continental GT Front axle; supported GT, GT Azure, GT First Edition, GT Mulliner, GT S, GT Speed, and GT Speed Edition 12 applications only in the verified year ranges

Specifications

Detail Value
Manufacturer Part Number 1551-1899-01
Series 5000 Advanced
Friction Material Low metallic
Position Front axle
Pad Quantity Four
Mounting Hardware Included
Shims Included
Clips Included
Wear Sensor Provision Prepared for electronic sensor
Wear Sensors Not included
Brake Disc Restriction Iron discs
Condition New
UPC 190920724763

What's Included

  • One exact Dynamic Friction Company 1551-1899-01 front 5000 Advanced low-metallic brake pad set
  • Four front brake pads in the exact application-specific shapes
  • Front mounting hardware, shims, and clips shown in the verified gallery
  • Wear sensors, rotors, calipers, brake fluid, tools, and unrelated rear components are not included

About Dynamic Friction Company

Dynamic Friction Company develops replacement brake components around application-specific caliper, rotor, hardware, and friction requirements. Correct axle position, rotor material, pad shape, hardware, sensor provision, and bedding procedure must be confirmed for every brake service.

Related Parts

  • Select front rotors, electronic wear sensors, brake fluid, and rear pads only by their own exact applications and manufacturer part numbers; no unverified internal product link is included.

FAQ

What is the 1551-1899-01?

It is front low-metallic brake pad set for the supported Audi RS Q8, Audi RS7 Sportback Performance, and Bentley Continental GT front iron-disc brake applications.

What application must be confirmed before ordering?

Confirm the exact year, model, supported trim, front axle, iron-disc configuration, caliper, pad shape, hardware, and wear-sensor requirement before ordering.

What is included?

The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.

Is this a universal product?

No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.

Does the listing include unrelated installation parts?

No. Only the exact component or kit identified in the included-items section is supplied.

Should existing components be inspected?

Yes. Inspect rotor thickness, runout and surface condition, caliper operation, hoses, fluid, electronic sensors, and all mounting hardware while the brakes are apart.

Is professional installation recommended?

Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.

What should be checked after installation?

Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.

Installation Instructions

  1. Confirm Dynamic Friction Company 1551-1899-01, the application, and every listed restriction before installation.
  2. Use the current Audi or Bentley service procedure, safely support the vehicle, and inspect rotor thickness, runout, calipers, hoses, fluid, hardware, and sensors.
  3. Remove the original pads and hardware without damaging the caliper, piston surfaces, or electronic sensor connections.
  4. Clean the pad contact areas and install the new pads with the verified shims, clips, and hardware supplied for this front application.
  5. Install separate compatible wear sensors where required, torque every fastener to the current service specification, and restore a firm pedal before moving the vehicle.
  6. Verify leak-free operation and correct electronic warnings, then complete the friction manufacturer's bedding procedure and recheck brake function.

California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

DFC 5000 Front Low-Metallic Brake Pads for Audi and Bentley

DFC
DFC1551-1899-01
190920724763
Brake Pads - OE
1 Units In Stock
$ 89.00
$ 89.00

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×