This DFC dfc brake hose is matched to the verified vehicle applications below under manufacturer part number 350-31040. It is built around the application-specific dimensions, position, and brake-system requirements documented below so the replacement can be checked before installation.
Fitment
| Years | Make | Model |
|---|---|---|
| 1992-1998 | BMW | 318i |
| 1992-1998 | BMW | 318is |
| 2000-2000 | BMW | 323Ci |
| 1998-1999 | BMW | 323i |
| 1998-1999 | BMW | 323is |
| 1992-1995 | BMW | 325i |
| 1992-1995 | BMW | 325is |
| 1996-1999 | BMW | 328i |
| 1996-1999 | BMW | 328is |
| 1995-1999 | BMW | M3 |
Specifications
| Manufacturer | Dynamic Friction Company |
|---|---|
| Manufacturer Part Number | 350-31040 |
| Product Type | Brake Line Kits |
| Position | Rear Upper |
| Weight | 0.3 LB |
What's Included
One DFC brake component or matched service set in the exact quantity and configuration identified by manufacturer part number 350-31040. Additional components are included only when expressly listed for this MPN.
About Dynamic Friction Company
Dynamic Friction Company develops OE-style and performance brake components for vehicle-specific service. Correct selection depends on the exact part number, application, dimensions, and brake-system position.
Related DFC Brake Parts
- DFC 96-06 Chevrolet P30 Front Right/Front-R Brake Hose
- DFC 97-07 BMW 325i Rear-lo/Rear Brake Hose
- DFC 01-07 Ford Escape Front Brake Hose
Browse the DFC collection for additional brake-service components.
Frequently Asked Questions
How do I confirm this DFC part fits my vehicle?
Match the exact manufacturer part number and every year, make, model, axle-position, brake-system, and dimensional requirement shown on this page. VIN-level confirmation is recommended when production splits exist.
Should related brake components be inspected during installation?
Yes. Inspect the mating pads or shoes, rotors or drums, calipers, hoses, lines, hardware, fluid condition, and wheel bearings as applicable before returning the vehicle to service.
Does this brake component require a break-in or final safety check?
Complete every bleeding, adjustment, torque, leak-check, pedal-restoration, and bedding step required for this exact component and vehicle before normal driving.
Installation Instructions
- Confirm the exact hydraulic component and vehicle application
- Protect painted surfaces and use only the specified brake fluid
- Install every fitting and fastener to the vehicle service-manual specification
- Bleed the complete hydraulic system in the required sequence
- Verify a firm pedal and inspect every connection for leaks before driving
BMW M
BMW M Series parts and accessories for M2, M3, M4, M5, and M8 models are stocked at Black Ops Auto Works. Shop cat-back and slip-on exhaust systems, carbon fiber tail pipes, headlight and taillight upgrades, carbon fiber hoods and grilles, intake valves, engine components, water pumps, and interior accessories for E46, E90, E92, F80, F82, F90, G80, G82, G87, and G90 chassis codes. Every product is filterable by year, make, model, chassis code, and trim so the correct part ships the first time. Black Ops Auto Works carries 1,328 BMW M Series SKUs across exhaust, lighting, engine, exterior, and interior categories. What This Collection Covers BMW M Series models span multiple chassis generations with different engine platforms, from the naturally aspirated S54 and S65 engines to the twin-turbo S55 and S58 engines found in current M3 and M4 models. This collection groups parts confirmed to fit the specific M chassis code and engine so E46 M3 owners, F80/F82 owners, and G80/G82 S58 ...
View BMW M Products
Brake Line Kits
Brake line kits and stainless steel brake lines for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop front brake line kits, rear brake line kits, full vehicle brake line sets, braided stainless lines, DOT approved lines, banjo fitting lines, and vehicle specific replacement lines for Hellcat, Trackhawk, TRX, HEMI, Coyote, and import platforms from Rotora, Goodridge, ISR Performance, StopTech, and Black Ops Auto Works. Every brake line kit is filterable by year, make, model, trim, engine, and drivetrain so the correct length, fitting size, and routing ships the first time. Black Ops Auto Works carries 647 brake line kit SKUs across front, rear, and full vehicle categories. What This Collection Covers Brake lines carry pressurized brake fluid from the master cylinder and ABS module to each caliper. Factory rubber brake lines expand slightly under hard braking pressure, which creates a small amount of pedal sponginess. Stainless steel braided lin...
View Brake Line Kits Products
Brakes
Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...
View Brakes Products
DFC Brake Parts
Shop DFC brake pads, brake rotors, drum brake shoes, and replacement brake components at Black Ops Auto Works. Dynamic Friction Company offers application-specific parts for brake maintenance and replacement across passenger cars, performance vehicles, trucks, and SUVs. Compare OE-style rotors, coated high-carbon alloy rotors, selected drilled and slotted designs, and brake pad options by exact vehicle application and manufacturer part number. DFC Brake Rotors and Replacement Brake Discs This collection includes DFC OE-style brake rotors and selected high-carbon alloy rotors with GEOMET coating. Available surface configurations include plain, drilled, slotted, and drilled-and-slotted designs, depending on the application. Choose the rotor specified for your braking system rather than selecting by appearance alone. Rotor diameter, thickness, height, hub dimensions, and axle position must match the vehicle’s requirements. Some listings are specific to the left or right side. Similar m...
View DFC Brake Parts Products


