Click to zoom in
High friction response for confident front axle control
DFC Active Performance front brake pads and hardware kit delivers responsive stopping for verified Volkswagen and Audi applications. This vehicle specific set uses a high friction formulation with low compressibility for strong initial bite, stable friction, and controlled pedal response. The exact manufacturer part number is 1115-1633-01.
Key Features
- High friction formulation supports strong initial bite and consistent modulation
- Low compressibility helps maintain a firm pedal feel
- Friction stability supports fade resistance during demanding driving
- 100 percent post cure and scorching process supports consistent pad behavior
- Positive mold construction supports uniform material density
- Premium Rubber Steel Rubber shims help manage noise and vibration
- Front axle application for the verified Volkswagen and Audi fitments below
- Includes the mounting hardware kit listed for this application
- Exact manufacturer part number 1115-1633-01 supports application matching
Fitment
| Vehicle Application | Position | Notes |
|---|---|---|
| 2015 to 2021 Volkswagen GTI Autobahn | Front | Verify brake configuration before ordering |
| 2019 Volkswagen GTI Rabbit Edition | Front | Verify brake configuration before ordering |
| 2019 to 2021 Volkswagen GTI S | Front | Verify brake configuration before ordering |
| 2015 to 2021 Volkswagen GTI SE | Front | Verify brake configuration before ordering |
| 2017 Volkswagen GTI Sport | Front | Verify brake configuration before ordering |
| 2019 Volkswagen Jetta GLI 35th Anniversary Edition | Front | Verify brake configuration before ordering |
| 2019 to 2021 Volkswagen Jetta GLI Autobahn | Front | Verify brake configuration before ordering |
| 2019 to 2021 Volkswagen Jetta GLI S | Front | Verify brake configuration before ordering |
| 2019 to 2021 Volkswagen Jetta R Line | Front | Verify brake configuration before ordering |
| 2019 to 2021 Volkswagen Jetta S | Front | Verify brake configuration before ordering |
| 2019 to 2021 Volkswagen Jetta SE | Front | Verify brake configuration before ordering |
| 2019 to 2021 Volkswagen Jetta SEL | Front | Verify brake configuration before ordering |
| 2019 to 2021 Volkswagen Jetta SEL Premium | Front | Verify brake configuration before ordering |
| 2014 Volkswagen CC 4 Motion | Front | Verify brake configuration before ordering |
| 2015 to 2019 Volkswagen Golf R | Front | Verify brake configuration before ordering |
| 2019 to 2020 Audi A3 Quattro Premium | Front | Verify brake configuration before ordering |
| 2019 to 2020 Audi A3 Quattro Premium Plus | Front | Verify brake configuration before ordering |
| 2019 Audi A3 Quattro Prestige | Front | Verify brake configuration before ordering |
| 2020 Audi S3 Premium | Front | Verify brake configuration before ordering |
| 2015 to 2020 Audi S3 Premium Plus | Front | Verify brake configuration before ordering |
| 2015 to 2019 Audi S3 Prestige | Front | Verify brake configuration before ordering |
Fitment note: the Volkswagen CC application requires 4 Motion. Audi A3 applications require Quattro. Confirm the vehicle configuration and existing brake setup before purchase.
Verified fitment record for this application uses the manufacturer part number 1115-1633-01.
Specifications
| Detail | Value |
|---|---|
| Brand | DFC |
| Product Type | Active Performance front brake pads and hardware kit |
| Manufacturer Part Number | 1115-1633-01 |
| Application | 2014 Volkswagen CC 4 Motion, 2015 to 2021 Volkswagen GTI, 2015 to 2019 Volkswagen Golf R, 2019 to 2021 Volkswagen Jetta, 2019 to 2020 Audi A3 Quattro, 2015 to 2020 Audi S3 |
| Position | Front |
| Formulation | High friction |
| Performance Features | High friction coefficient and low compressibility |
| Shim Construction | Premium Rubber Steel Rubber |
| Condition | New |
What's Included
- Active Performance front brake pad set
- Mounting hardware kit
About DFC
DFC's Active Performance brake pad line focuses on high friction response, stable friction behavior, low compressibility, and controlled modulation for street and performance applications. Its pad construction and shim design are intended to support consistent pedal feel across the verified front applications.
FAQ
What is the 1115-1633-01?It is the manufacturer part number for this DFC Active Performance front brake pad and hardware kit.
Which vehicles use this brake pad set?It fits the Volkswagen GTI, Jetta, CC, and Golf R applications plus the listed Audi A3 Quattro and S3 trims in the fitment table.
Which axle does this set fit?This set is for the front axle only.
Will it fit every version of the listed vehicle?No. Confirm the year, model, trim, drivetrain, and brake configuration against the fitment table and the vehicle before ordering.
Does the package include mounting hardware?Yes. The package includes the front pad set and a mounting hardware kit.
What type of friction material does it use?The Active Performance formulation uses high friction characteristics with low compressibility to support initial bite, pedal response, modulation, and friction stability.
Do the shims help with noise and vibration?The package uses Premium Rubber Steel Rubber shims designed to help manage noise and vibration.
Does the package include a wear sensor?A wear sensor is not identified in the package contents. Confirm the sensor arrangement on the vehicle before ordering.
Can I install these pads without checking the rotors?Inspect the front rotors and related hardware during brake service. Replace or service any component that does not meet the vehicle manufacturer's specifications.
How should the new pads be bedded?After installation, follow the vehicle service procedure and use a controlled bedding process suitable for the pad and rotor combination. Avoid repeated heavy stops until the bedding process is complete.
Installation Instructions
- Confirm the vehicle application, front position, brake configuration, and manufacturer part number 1115-1633-01 before beginning work.
- Park on a stable surface, secure the vehicle, and follow the vehicle manufacturer's lifting and support procedure.
- Remove the front wheel and brake components using the vehicle service procedure. Support the caliper without placing load on the brake hose.
- Compare the new pads and mounting hardware with the removed components before installation.
- Clean the applicable mounting surfaces and install the supplied hardware in the correct locations.
- Install the pads, refit the caliper, and tighten all fasteners to the vehicle manufacturer's specified values.
- Reinstall the wheel and lower the vehicle using the approved procedure.
- Press the brake pedal until it reaches a firm feel, check fluid level, and inspect for interference or leaks.
- Complete a controlled bedding process appropriate for the vehicle and brake components, then recheck operation before normal driving.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Prop 65 Warning
WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Brake Pads
Brake pads and brake shoes for cars, trucks, SUVs, and performance builds are stocked at Black Ops Auto Works. Shop ceramic pads, semi-metallic pads, full metallic and racing compounds, low-dust street pads, big brake kit pads, OE-replacement pads, and drum brake shoes for HEMI, Hellcat, Trackhawk, Redeye, Demon, Scat Pack, RAM TRX, LS, LT, Coyote, EcoBoost, and import platforms. Every pad set is filterable by year, make, model, trim, and caliper type (OE floating caliper, Brembo fixed caliper, big brake kit caliper) so the correct compound and shape ships the first time. Black Ops Auto Works carries 4,351 brake pad and brake shoe SKUs across street, sport, and track compounds. What This Category Covers Brake pads are the most frequently replaced brake component and the single highest-value brake upgrade for most drivers. Swapping stock pads for a quality ceramic or semi-metallic compound produces an immediate improvement in stopping distance, pedal feel, and fade resistance wit...
View Brake Pads Products
Brake Pads - Performance
Performance brake pads for daily-driven sport cars, sport trucks, tow rigs, and occasional track-day builds are stocked at Black Ops Auto Works. Shop ceramic performance pads, semi-metallic performance pads, street-track dual-purpose pads, and extra-duty compounds for Hellcat, Trackhawk, HEMI, Coyote, LS, LT, and import platforms. Every product is filterable by year, make, model, trim, and factory brake package so the correct pad ships the first time. Black Ops Auto Works carries 2,777 performance brake pad SKUs across ceramic, semi-metallic, street-track, and extra-duty categories. What This Collection Covers Performance brake pads sit between the OE-comfort tier (quietest, longest life, lowest bite) and the racing tier (highest bite, shortest life). This collection is the correct starting point for enthusiast street builds, sport trucks, and occasional track use. Pad Categories Street performance pads, street-track pads, high-friction ceramic pads, semi-metallic performance pa...
View Brake Pads - Performance Products
Brakes
Brake parts and complete brake kits for cars, trucks, SUVs, Jeeps, and track builds are stocked at Black Ops Auto Works. Shop brake pads, brake rotors, big brake kits, brake calipers, caliper covers, stainless steel brake lines, brake master cylinders, brake hardware, brake drums, brake shoes, hand brakes, and brake adapters for HEMI, Hellcat, Trackhawk, TRX, LS, LT, Coyote, and EcoBoost platforms. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 14,180 brake SKUs across pads, rotors, big brake kits, calipers, and hydraulic categories. What This Category Covers Brakes are the highest-priority safety upgrade on any modified vehicle. Any horsepower, tire, or suspension change increases the demand placed on the braking system, and a correctly matched pad, rotor, line, and fluid package produces measurable improvements in stopping distance, pedal feel, and heat capacity. This collect...
View Brakes Products
Volkswagen
Volkswagen parts and accessories for Golf, GTI, Golf R, Jetta, Passat, Tiguan, Atlas, Beetle, CC, e-Golf, and I.D. Buzz are stocked at Black Ops Auto Works. Shop lowering springs, coilovers, sway bars, control arm bushings, brake pads, brake rotors, brake kits, cat-back exhaust systems, control arms, flexlines, and floor mats for MK3 through MK8 platforms and the 8V/8Y Audi-shared chassis. Every product is filterable by year, make, model, trim, engine, and drivetrain so the correct part ships the first time. Black Ops Auto Works carries 875 Volkswagen SKUs across suspension, brakes, exhaust, and interior categories. What This Collection Covers Volkswagen has sold Golf, GTI, Jetta, Passat, Tiguan, and Atlas models across several generations in the United States, and suspension, brake, and exhaust fitment changes with each chassis update. This collection groups parts confirmed to fit the correct MK generation and engine so MK3 8V owners, MK6 Jetta owners, and current MK7/MK8 Golf ...
View Volkswagen Products