-20%
Dinan D760-0046 closed carbon-fiber BMW cold air intake
Dinan D760-0046 blue replacement air filter
Dinan D760-0046 carbon-fiber airbox lid detail
Dinan D760-0046 installed in a BMW B58 engine bay
Dinan D760-0046 complete intake alternate view
Dinan D760-0046 installed carbon intake tube and airbox
Dinan D760-0046 carbon intake tube detail
Dinan D760-0046 closed intake rear three-quarter view
Click to zoom in
View vehicle applications

Description

Increase airflow while keeping the intake sealed from engine-bay heat

Dinan D760-0046 replaces the restrictive upper factory intake tract on supported B58-powered BMW models with a larger sealed airbox, enlarged filter, optimized carbon-fiber tube, and freer-flowing air-mass-meter housing. Dinan publishes gains up to 15 horsepower and 13 lb-ft at 6,000 rpm without additional modifications while retaining restrained intake sound from the closed design.

Key Features

  • D760-0046 exact closed and sealed carbon-fiber configuration
  • Airbox volume is 30 percent larger than stock
  • Filter area increases from 76.3 to 102.1 square inches
  • Air-mass-meter housing is eight percent larger than stock
  • Published maximum gain of 15 horsepower and 13 lb-ft at 6,000 rpm
  • Improved throttle response with minimal sound increase from the sealed enclosure
  • One-hour manufacturer-listed installation time for a qualified installer

Application Details and Restrictions

Years Make Model Verified Application and Notes
2017-2021 BMW M240i / M240i xDrive Coupe or convertible; 3.0L turbo B58
2016-2018 BMW 340i / 340i xDrive Sedan; 3.0L turbo B58
2018-2019 BMW 340i xDrive Gran Turismo 3.0L turbo B58
2017-2020 BMW 440i / 440i xDrive Coupe or convertible; 3.0L turbo B58
2017-2020 BMW 440i / 440i xDrive Gran Coupe 3.0L turbo B58

Specifications

Detail Value
Manufacturer Part Number D760-0046
Product Type Closed cold air intake
Primary Material Carbon fiber
Filter Dinan blue reusable performance filter
Airbox Volume 30 percent larger than stock
Filter Area 102.1 square inches; stock is 76.3 square inches
Air-Mass-Meter Housing Eight percent larger than stock
Maximum Published Gain 15 hp and 13 lb-ft at 6,000 rpm
Sound Character Minimal increase due to closed enclosure
Labor Time One hour listed by Dinan
Emissions Federal street use where accepted; not legal for sale or use in California
UPC 813725024967

What's Included

  • One Dinan D760-0046 carbon-fiber airbox lid
  • One Dinan air-mass-meter housing
  • One carbon-fiber intake tube
  • Two application-specific silicone hoses
  • One Dinan blue air filter
  • One hardware kit with clamps, spring clips, gasket, washers, fasteners, and support washers
  • The optional vented-lid retrofit and optional turbo inlet pipe are not included

About Dinan

Dinan develops application-specific BMW performance systems with published fitment, emissions guidance, installation documentation, and measured performance data. This closed intake is designed for B58-powered M240i, 340i, and 440i applications that use the documented factory airbox and sensor layout.

Related Parts

  • Dinan D401-0025 replacement filter for the documented intake system
  • Dinan D760-0061 turbo inlet pipe where its separate vehicle application is confirmed
  • Dinan D763-0213-G-A vented-lid retrofit for owners who want more intake sound

FAQ

What is the D760-0046?

It is Dinan's closed carbon-fiber cold air intake for the verified B58-powered BMW applications in the fitment table.

Which BMW engines fit?

Every verified application uses the turbocharged 3.0L B58 engine and the specific factory intake layout listed by Dinan.

How much power does Dinan publish?

Dinan lists a maximum gain of 15 horsepower and 13 lb-ft at 6,000 rpm without additional modifications.

Does the intake make much more noise?

The closed and sealed enclosure keeps sound gain modest compared with Dinan's separate semi-open configuration.

Is the semi-open lid included?

No. The vented-lid retrofit is a separate part and is not included with this closed configuration.

Is the turbo inlet pipe included?

No. The compatible Dinan turbo inlet is a separate product and must be selected by its own application data.

Is it legal for use in California?

No. Dinan's current exact-product page states that this part is not legal for sale or use in California.

What warranty applies?

Dinan warranty coverage is governed by its current written warranty terms, correct application, and proper installation.

Installation Instructions

  1. Confirm the package identifies D760-0046 and the BMW year, model, body style, drivetrain, and B58 engine match the fitment table.
  2. Let the engine bay cool for at least the manufacturer-recommended period and disconnect the air-mass-meter sensor harness.
  3. Remove the air-mass-meter sensor carefully and protect it from impact, contamination, and static damage.
  4. Release the factory airbox clips, loosen the turbo-inlet clamp, and remove the original lid, tube, and filter while covering the exposed turbo inlet.
  5. Install the supplied Dinan spring clips and adhesive gasket into the cleaned lower factory airbox.
  6. Assemble the Dinan air-mass-meter housing, filter, carbon tube, silicone hoses, and supplied clamps in the documented orientation.
  7. Seat the airbox lid, align the tube for clearance, reconnect the sensor, and tighten every clamp and fastener to the current Dinan instructions.
  8. Inspect for air leaks, sensor faults, hose contact, and hood clearance before driving, then recheck the assembly after initial heat cycles.

California Proposition 65 Warning: Cancer and reproductive harm. See www.P65Warnings.ca.gov.

Dinan Closed Carbon Fiber Cold Air Intake for BMW M240i, 340i and 440i

Dinan
DNND760-0046
813725024967
Cold Air Intake
23 Units In Stock
$ 658.95 $ 525.95
$ 525.95

Military & First Responders

Military & First Responders

A program for military members and first responders, with dedicated verification and support for your next build.

Learn More & Apply

Your cart

×