View vehicle applications
Fitment notes and restrictions
Description
Reduce body roll while keeping the factory adaptive dampers
Dinan D100-0935 is a four-spring performance set for the supported BMW X3 M and X4 M. The CNC-wound chrome-silicon springs lower the vehicle approximately one inch at both axles and raise spring stiffness by about 20 percent while remaining compatible with the factory adaptive dampers.
Key Features
- Dinan D100-0935 is matched to the verified application and configuration
- Approximate one-inch front and rear lowering
- Approximately 20 percent higher front and rear spring stiffness
- CNC-wound high-tensile chrome-silicon wire
- Shot-peened for stress relief
- Preset to reduce spring sag
- Compatible with factory M Adaptive Suspension
- Dinan recommends the matching Ride Quality and Handling Kit for intended ride height and behavior
Application details and restrictions
| Years | Make | Models | Requirement |
|---|---|---|---|
| 2020-2025 | BMW | X3 M / X4 M | Includes supported Competition variants; retain factory adaptive dampers. Dinan strongly recommends D193-9701 Ride Quality and Handling Kit. |
Specifications
| Detail | Value |
|---|---|
| Manufacturer Part Number | D100-0935 |
| Product Type | Matched performance spring set |
| Quantity | Four springs |
| Approximate Lowering | 1 in front and rear |
| Spring Rate Change | Approximately 20% increase front and rear |
| Material | High-tensile chrome-silicon wire |
| Factory Adaptive Dampers | Compatible |
| Recommended Companion Part | D193-9701 |
| UPC | 810009938507 |
What's Included
- One exact Dinan D100-0935 matched four-spring set
- Only instructions or material supplied in the sealed Dinan package
- D193-9701 handling kit, dampers, tools, alignment, and unrelated hardware are not included
About Dinan
Dinan develops BMW performance systems with coordinated spring rates, travel, damping, and chassis behavior. This spring set is designed to work with the matching supplemental handling kit so advertised ride quality and suspension travel are not evaluated in isolation.
Related Parts
- Dinan D193-9701 Supplemental Ride Quality and Handling Kit is manufacturer-recommended; no internal link is included unless the exact active product and handle are verified.
FAQ
What is the D100-0935?It is performance spring set for the supported 2020-2025 BMW X3 M and X4 M applications.
What application must be confirmed before ordering?Confirm X3 M or X4 M model year, factory adaptive suspension, and the recommended D193-9701 companion handling kit before installation.
What is included?The exact supplied components are listed in the What's Included section; unrelated installation parts are not included.
Is this a universal product?No broad universal fit is claimed. Use only the verified vehicle, dimensions, or companion product stated in the application section.
Does the listing include unrelated installation parts?No. Only the exact component or kit identified in the included-items section is supplied.
Should existing components be inspected?Inspect dampers, mounts, bump stops, isolators, bushings, tires, wheels, brake hoses, and alignment hardware while the suspension is apart.
Is professional installation recommended?Professional installation is recommended whenever the work affects safety, pressurized fluid, suspension geometry, electrical wiring, or protective equipment setup.
What should be checked after installation?Verify secure mounting, correct routing or clearance, proper function, and every manufacturer-specified post-installation check before normal use.
Installation Instructions
- Confirm Dinan D100-0935, the application, and every listed restriction before installation.
- Measure original ride height and inspect the complete suspension, steering, tires, and wheels.
- Safely remove the original springs using the current BMW procedure and an approved spring compressor.
- Install each Dinan spring in its marked axle position with the spring ends seated correctly in the factory isolators.
- Install the recommended supplemental components, then torque suspension fasteners at the specified ride-height position.
- Verify clearance, perform a four-wheel alignment, road-test carefully, and recheck ride height and hardware after settling.
California Proposition 65 Warning: This product can expose you to chemicals including antimony oxide and other chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.




